Early development and neurogenesis of Temnopleurus reevesii

Sea urchins are model non‐chordate deuterostomes, and studying the nervous system of their embryos can aid in the understanding of the universal mechanisms of neurogenesis. However, despite the long history of sea urchin embryology research, the molecular mechanisms of their neurogenesis have not been well investigated, in part because neurons appear relatively late during embryogenesis. In this study, we used the species Temnopleurus reevesii as a new sea urchin model and investigated the detail of its development and neurogenesis during early embryogenesis. We found that the embryos of T. reevesii were tolerant of high temperatures and could be cultured successfully at 15–30°C during early embryogenesis. At 30°C, the embryos developed rapidly enough that the neurons appeared at just after 24 h. This is faster than the development of other model urchins, such as Hemicentrotus pulcherrimus or Strongylocentrotus purpuratus. In addition, the body of the embryo was highly transparent, allowing the details of the neural network to be easily captured by ordinary epifluorescent and confocal microscopy without any additional treatments. Because of its rapid development and high transparency during embryogenesis, T. reevesii may be a suitable sea urchin model for studying neurogenesis. Moreover, the males and females are easily distinguishable, and the style of early cleavages is intriguingly unusual, suggesting that this sea urchin might be a good candidate for addressing not only neurology but also cell and developmental biology.     

Boundary layer properties of highly dissected leaves: an investigation using an electrochemical fluid tunnel

Abstract. A method for modelling heat and mass transfer by diffusion-controlled electrode reactions in a fluid tunnel is described. In this procedure, a nickelplated leaf functions as a test electrode, and the convective transfer of ions to the leaf cathode in an electrolyte-filled flow tunnel is measured as a function of flow rate. The method permits the simulation of water vapour and heat transfer, and in particular, the determination of boundary layer conductances, by analogy with observed ion transfer. The approach is applicable to many problems in modelling heat and mass transfer between leaves and their surroundings, and is especially useful in examining the properties of leaves in which surface characteristics or overall shape are complex. Using this method, the properties of the highly dissected leaves of Achillea lanulosa with regard to forced convection were investigated. The leaves showed high transfer conductances, indicating that the effective unit of heat transfer was probably the individual leaf subelements. Conductances tended to be greater and effective characteristic dimensions smaller for the larger, more open leaves of a lower altitude population in contrast with leaves from high altitude plants. While the results provide insight into the properties of these complex leaf shapes, difficulties in interpreting the findings are discussed, and a number of exploratory approaches are suggested for data analysis and interpretation.     

The effect of temperature on reproduction in three species of cyclopoid copepods

Megacyclops viridis (Jurine), Macrocyclops albidus (Jurine), and Acanthocyclops vernalis (Fischer) were raised in the laboratory at six temperatures (5, 8, 10, 12, 15 and 20°) and fed a mixture of ciliates (Paramecium caudatum and Colpidium campylum). Data were taken on clutch size, embryonic development time, interclutch period, time to first clutch, sex ratio and longevity.Clutch size, time to first clutch, embryonic development time, interclutch period and longevity are inversely related to temperature. The ratio of males to females in a cohort is independent of temperature.     

The interaction of temperature and fish size on growth of juvenile turbot

Growth rate of tagged juvenile turbot was significantly influenced by the interaction of temperature and fish size. The results suggest the optimum temperature for growth of juvenile turbot in the size range 25–75 g is between 16 and 19°C. Optimal temperature for growth decreased rapidly with increasing size, and is between 13 and 16°C for 100 g turbot. Although individual growth rates varied highly at all times within the temperature treatments, significant size rank correlations were maintained during the experimental period. The study confirms that turbot exhibit ontogenetic variation in temperature optimum, which might partly explain different spatial distribution of juvenile and adult turbot in ocean waters.     

Temperature thresholds for germination in 20 short‐range endemic plant species from a Greenstone Belt in southern Western Australia

• The study of climate‐driven effects on seed traits such as germination has gained momentum over the past decade as the impact of global warming becomes more apparent on the health and survival of plant diversity.
• Seed response to warming was evaluated in a suite of short‐range endemic species from the biodiverse Greenstone Belt of southern Western Australia. The temperature dimensions for germination in 20 woody perennials were identified using small unreplicated samples over 6 weeks on a temperature gradient plate (constant and fluctuating temperatures between 5 and 40 °C). These data were subsequently modelled against current and forecast (2070) mean monthly minimum and maximum temperatures to illustrate seasonal changes to germination timing and final percentage germination.
• All but one species attained full germination in at least one cell on the gradient plate. Modelling of the data suggested only minimal changes to percentage germination despite a forecast rise in diurnal temperatures over the next 50 years. Nine species were predicted to experience declines of between <1% and 7%, whilst 11 species were predicted to increase their germination by <1% to 3%. Overall, the speed of germination is predicted to increase but the timing of germination for most species shifts seasonally (both advances and delays) as a result of changing diurnal temperatures.
• The capacity of this suite of species to cope with warmer temperatures during a critical early life stage shows a degree of adaptation to heterogeneous environments. Predicting the effects of global change on terrestrial plant communities is crucial to managing and conserving plant diversity.

     

Spatial metrics for detecting ecosystem degradation in the ridge-slough patterned landscape

Indicators of landscape condition should be selected based on their sensitivity to environmental changes and their capacity to provide early warning detection of those changes. We assessed the performance of a suite of spatial-pattern metrics selected to quantify the condition of the ridge-slough landscape in the Everglades (South Florida, USA). Spatial pattern metrics (n = 14) that describe landscape composition, geometry and hydrologic connectivity were enumerated from vegetation maps of twenty-five 2 × 2 km primary sampling units (PSUs) that span a gradient of hydrologic and ecological condition across the greater Everglades ecosystem. Metrics were assessed in comparison with field measurements from each PSU of landscape condition obtained from regional surveys of soil elevation, which have previously been shown to capture dramatic differences between conserved and degraded locations. Elevation-based measures of landscape condition included soil elevation bi-modality (BI_SE), a binary measure of landscape condition, and also the standard deviation of soil elevation (SD_SE), a continuous measure of condition. Metric performance was assessed based on the strength (sensitivity) and shape (leading vs. lagging) of the relationship between spatial pattern metrics and these elevation-based measures. We observed significant logistic regression slopes with BI_SE for only 4 metrics (slough width, ridge density, directional connectivity index – DCI, and least flow cost – LFC). More significant relationships (n = 8 metrics) were observed with SD_SE, with the strongest associations for slough density, mean ridge width, and the average length of straight flow, as well as for a suite of hydrologic connectivity metrics (DCI, LFC and landscape discharge competence – LDC). Leading vs. lagging performance, inferred from the curvature of the association obtained from the exponent of fitted power functions, suggest that only DCI was a leading metric of the loss of soil elevation variation; most metrics were indeterminate, though some were clearly lagging. Our findings support the contention that soil elevation changes from altered peat accretion dynamics precede changes in landscape pattern, and offer insights that will enable efficient monitoring of the ridge-slough landscape as part of the ongoing Everglades restoration effort.     

Improving efficiency of breeding for higher crop yield

Summary Exclusive selection for yield raises, the harvest index of self-pollinated crops with little or no gain in total bipmass. In addition to selection for yield, it is suggested that efficient breeding for higher yield requires simultaneous selection for yield's three major, genetically controlled physiological components. The following are needed: (1) a superior rate of biomass accumulation. (2) a superior rate of actual yield accumulation in order to acquire a high harvest index, and (3) a time to harvest maturity that is neither shorter nor longer than the duration of the growing season. That duration is provided by the environment, which is the fourth major determinant of yield. Simultaneous selection is required because genetically established interconnections among the three major physiological components cause: (a) a correlation between the harvest index and days to maturity that is usually negative; (b) a correlation between the harvest index and total biomass that is often negative, and (c) a correlation between biomass and days to maturity that is usually positive. All three physiological components and the correlations among them can be quantified by yield system analysis (YSA) of yield trials. An additive main effects and multiplicative interaction (AMMI) statistical analysis can separate and quantify the genotype × environment interaction (G × E) effect on yield and on each physiological component that is caused by each genotype and by the different environment of each yield trial. The use of yield trials to select parents which have the highest rates of accumulation of both biomass and yield, in addition to selecting for the G × E that is specifically adapted to the site can accelerate advance toward the highest potential yield at each geographical site. Higher yield for many sites will raise average regional yield. Higher yield for multiple regions and continents will raise average yield on a world-wide basis. Genetic and physiological bases for lack of indirect selection for biomass from exclusive selection for yield are explained.     

Temperature gradient gel electrophoresis: detection of a single base substitution in the cattle β-lactoglobulin gene

An A in equilibrium with G transition in exon III is known to differentiate alleles A and B of the cattle beta-lactoglobulin (BLG) gene. A BLG exon III fragment containing the transition site was amplified by the polymerase chain reaction. Temperature gradient gel electrophoresis (TGGE) was then used to detect this transition and hence to genotype cattle: the AT base-pair in allele A was readily distinguished from the GC base-pair of allele B. TGGE can be used to detect any single base-pair substitution, and thus is a powerful method of detecting genetic variability.     

A New Electrolyte Formulation for Securing High Temperature Cycling and Storage Performances of Na‐Ion Batteries

The Na‐ion battery is recognized as a possible alternative to the Li‐ion battery for applications where power and cost override energy density performance. However, the increasing instability of their electrolyte with temperature is still problematic. Thus, a central question remains how to design Na‐based electrolytes. Here, the discovery of a Na‐based electrolyte formulation is reported which enlists four additives (vinylene carbonate, succinonitrile, 1,3‐propane sultone, and sodium difluoro(oxalate)borate) in proper quantities that synergistically combine their positive attributes to enable a stable solid electrolyte interphase at both negative and positive electrodes surface at 55 °C. Moreover, the role of each additive that consists in producing specific NaF coatings, thin elastomers, sulfate‐based deposits, and so on via combined impedance and X‐ray photoelectron spectroscopy is rationalized. It is demonstrated that empirical electrolyte design rules previously established for Li‐ion technology together with theoretical guidance is vital in the quest for better Na‐based electrolytes that can be extended to other chemistries. Overall, this finding, which is implemented to 18 650 cells, widens the route to the rapid development of the Na‐ion technology based on Na₃V₂(PO₄)₂F₃/C chemistry.     

Effects of exposure to short-term heat stress on fitness components in Drosophila melanogaster

Effects of thermal stress on survival and reproductive success in ten recently collected isofemale lines of Drosophila melanogaster were compared for flies treated as follows: always held at 25° C, placed in an incubator set at 37° C for 120 min, or exposed to 40° C in an incubator for 90 min, with or without previous exposure to 37° C. Short-term exposure to the higher temperature greatly reduced adult survival, the mating frequency of males and females, and female fecundity, which was measured as offspring produced over ten days. Male fertility, measured as the progeny produced by a female mated once, differed little among treatments. Previous exposure to a high, but non-lethal, temperature before exposure to the higher one, improved survival of males and females, and improved offspring production of females. Genetic variation was present among lines for offspring production, but genetic variation for survival was not significant, and genotype by environment interactions for fitness components of females were small. These results indicated low genetic variation in thermal resistance in the studied population, such that a threshold for temperature stress probably exists, above which local extinction is more likely than the evolution of resistance.