Histological and mechanical evaluation of antifreeze peptide (Afp1m) cryopreserved skin grafts post transplantation in a rat model

The objective of this study was to evaluate the use of Afp1m as a cryopreservative agent for skin by examining the transplanted skin histological architecture and mechanical properties following subzero cryopreservation. Thirty four (34) rats with an average weight of 208 ± 31 g (mean ± SD), were used. Twenty four (n = 24) rats were equally divided into four groups: (i) immediate non-cryopreserved skin autografts (onto same site), (ii) immediate non-cryopreserved skin autografts (onto different sites), (iii) skin autografts cryopreserved with glycerol for 72 h and (iv) skin autografts cryopreserved with Afp1m for 72 h at −4 °C. Rounded shaped full-thickness 1.5–2.5 cm in diameter skin was excised from backs of rats for the autograft transplantation. Non-cryopreserved or cryopreserved auto skin graft were positioned onto the wound defects and stitched. Non-transplanted cryopreserved and non-cryopreserved skin strips from other ten rats (n = 10) were allowed for comparative biomechanical test. All skin grafts were subjected to histological and mechanical examinations at the end of day 21. Histological results revealed that tissue architecture especially the epidermal integrity and dermal-epidermal junction of the Afp1m cryopreserved skin grafts exhibited better histological appearance, good preservation of tissue architecture and structural integrity than glycerolized skin. However, there was no significant difference among these groups in other histological criteria. There were no significant differences among the 4 groups in skin graft mechanical properties namely maximum load. In conclusion, Afp1m were found to be able to preserve the microstructure as well as the viability and function of the skin destined for skin transplantation when was kept at −4 °C for 72 h.     

Mechanical forces: The missing link between idiopathic pulmonary fibrosis and lung cancer

Patients with idiopathic pulmonary fibrosis (IPF) have a high risk of developing lung cancer compared with the general population. The morbidity of lung cancer in IPF patient ranges from 3% to 22%, and in some cases exceeds 50%, and these patients have a reduced survival time. However, the mechanisms through which IPF increases the morbidity and mortality in lung cancer remain unclear.By carefully analyzing the pathological features of these two diseases, we uncovered that, first, similar to IPF, lung carcinomas are more frequently found in the peripheral area of the lungs and, second, lung cancers tend to develop from the honeycomb areas in IPF. In accordance with the above pathological features, due to the spatial location, the peripheral areas of the lung experience a high stretch force because the average distance between adjacent alveolar cells in this area tends to be larger than that at the central lung when inflated; furthermore, the honeycomb areas, comprised of condensed fibrous tissue, are characterized by increased stiffness. Both of these pathological features of lung cancer and IPF are coincidentally related to abnormal mechanical forces (stretch and tissue stiffness). Therefore, we believe that the aberrant mechanical forces that are generated in the lung with IPF may contribute to the onset and progression of lung cancer.In this review, we discuss the possible effects of mechanical forces that are generated in IPF on the initiation and progression of lung cancer from the perspective of the hallmarks of cancer, including proliferation, metastasis, angiogenesis, cancer stem cells, immunology, epigenetics, and metabolism, so as to advance our understanding of the pathogenesis of IPF-related lung cancer and to harness these concepts for lung cancer mechanotherapies.     

A comparison of mechanisms of desiccation tolerance among three angiosperm resurrection plant species

The mechanisms of protection against mechanical and oxidative stress were identified and compared in the angiosperm resurrection plants Craterostigma wilmsii, Myrothamnus flabellifolius and Xerophyta humilis. Drying-induced ultrastructural changes within mesophyll cells were followed to gain an understanding of the mechanisms of mechanical stabilisation. In all three species, water filled vacuoles present in hydrated cells were replaced by several smaller vacuoles filled with non-aqueous substances. In X. humilis, these occupied a large proportion of the cytoplasm, preventing plasmalemma withdrawal and cell wall collapse. In C. wilmsii, vacuoles were small but extensive cell wall folding occurred to prevent plasmalemma withdrawal. In M. flabellifolius, some degree of vacuolation and wall folding occurred, but neither were sufficient to prevent plasmalemma withdrawal. This membrane was not ruptured, possibly due to membrane repair at plasmodesmata junctions where tearing might have occurred. In addition, the extra-cytoplasmic compartment appeared to contain material (possibly similar to that in vacuoles) which could facilitate stabilisation of dry cells.Photosynthesis and respiration are particularly susceptible to oxidative stress during drying. Photosynthesis ceased at high water contents and it is proposed that a controlled shut down of this metabolism occurred in order to minimise the potential for photo-oxidation. The mechanisms whereby this was achieved varied among the species. In X. humilis, chlorophyll was degraded and thylakoid membranes dismantled during drying. In both C. wilmsii and M. flabellifolius, chlorophyll was retained, but photosynthesis was stopped due to chlorophyll shading from leaf folding and anthocyanin accumulation. Furthermore, in M. flabellifolius thylakoid membranes became unstacked during drying. All species continued respiration during drying to 10% relative water content, which is proposed to be necessary for energy to establish protection mechanisms. Activity of antioxidant enzymes increased during drying and remained high at low water contents in all species, ameliorating free radical damage from both photosynthesis and respiration. The nature and extent of antioxidant upregulation varied among the species. In C. wilmsii, only ascorbate peroxidise activity increased, but in M. flabellifolius and X. humilis ascorbate peroxidise, glutathione reductase and superoxide dismutase activity increased, to various extents, during drying. Anthocyanins accumulated in all species but this was more extensive in the homoiochlorophyllous types, possibly for protection against photo-oxidation.     

Evaluation of four-dimensional cone beam computed tomography ventilation images acquired with two different linear accelerators at various gantry speeds using a deformable lung phantom

We evaluated four-dimensional cone beam computed tomography (4D-CBCT) ventilation images (VI_CBCT) acquired with two different linear accelerator systems at various gantry speeds using a deformable lung phantom.The 4D-CT and 4D-CBCT scans were performed using a computed tomography (CT) scanner, an X-ray volume imaging system (Elekta XVI) mounted in Versa HD, and an On-Board Imager (OBI) system mounted in TrueBeam. Intensity-based deformable image registration (DIR) was performed between peak-exhale and peak-inhale images. VI_CBCT- and 4D-CT-based ventilation images (VI_CT) were derived by DIR using two metrics: one based on the Jacobian determinant and one on changes in the Hounsfield unit (HU). Three different DIR regularization values (λ) were used for VI_CBCT. Correlations between the VI_CBCT and VI_CT values were evaluated using voxel-wise Spearman’s rank correlation coefficient (r).In case of both metrics, the Jacobian-based VI_CBCT with a gantry speed of 0.6 deg/sec in Versa HD showed the highest correlation for all the gantry speeds (e.g., λ = 0.05 and r = 0.68). Thus, the r value of the Jacobian-based VI_CBCT was greater or equal to that of the HU-based VI_CBCT. In addition, the ventilation accuracy of VI_CBCT increased at low gantry speeds.Thus, the image quality of VI_CBCT was affected by the change in gantry speed in both the imaging systems. Additionally, DIR regularization considerably influenced VI_CBCT in both the imaging systems. Our results have the potential to assist in designing CBCT protocols, incorporating VI_CBCT imaging into the functional avoidance planning process.     

Functional lung imaging with synchrotron radiation: Methods and preclinical applications

Many lung disease processes are characterized by structural and functional heterogeneity that is not directly appreciable with traditional physiological measurements. Experimental methods and lung function modeling to study regional lung function are crucial for better understanding of disease mechanisms and for targeting treatment. Synchrotron radiation offers useful properties to this end: coherence, utilized in phase-contrast imaging, and high flux and a wide energy spectrum which allow the selection of very narrow energy bands of radiation, thus allowing imaging at very specific energies. K-edge subtraction imaging (KES) has thus been developed at synchrotrons for both human and small animal imaging. The unique properties of synchrotron radiation extend X-ray computed tomography (CT) capabilities to quantitatively assess lung morphology, and also to map regional lung ventilation, perfusion, inflammation and biomechanical properties, with microscopic spatial resolution. Four-dimensional imaging, allows the investigation of the dynamics of regional lung functional parameters simultaneously with structural deformation of the lung as a function of time. This review summarizes synchrotron radiation imaging methods and overviews examples of its application in the study of disease mechanisms in preclinical animal models, as well as the potential for clinical translation both through the knowledge gained using these techniques and transfer of imaging technology to laboratory X-ray sources.     

Cellulase Hydrolysis of Cotton Cellulose: The Effects of Mechanical Action,Enzyme Concentration and Dyed Substrates

Experiments with dyed and undyed cotton, using different cellulose concentration and with or with out mechanical action showed a high effect of those factors. The process with mechanical action have a higher weight-loss. Dyed cotton with vat and sulfur dyes have almost die same weight-loss than undyed cotton, but on reactive dyed cotton the cellulase hydrolysis is shorter. It was also verified a decrease of hydrolysis extent with an increase of the reactive dye concentration on the cotton substrate. Some synergism due to the enzyme concentration was apparently observed on the changes of the length of the leaving sugars.     

Mechanobiology of neural development

As the brain develops, proliferating cells organize into structures, differentiate, migrate, extrude long processes, and connect with other cells. These biological processes produce mechanical forces that further shape cellular dynamics and organ patterning. A major unanswered question in developmental biology is how the mechanical forces produced during development are detected and transduced by cells to impact biochemical and genetic programs of development. This gap in knowledge stems from a lack of understanding of the molecular players of cellular mechanics and an absence of techniques for measuring and manipulating mechanical forces in tissue. In this review article, we examine recent advances that are beginning to clear these bottlenecks and highlight results from new approaches that reveal the role of mechanical forces in neurodevelopmental processes.     

Thermo-osmotic gas supply not detected in Avicennia marina seedlings

Ethane was used as tracer gas to assess the likelihood of thermo-osmotically induced mass-flow in the aerenchyma of Avicennia marina seedlings without pneumatophores. Ethane movement was measured in darkness and with illumination at approximately 600 µ mol m^–2s^–1 provided to the leaves and stem, with the expectation that leaf warming under illumination would provide for thermo-osmotic flow. In some seedlings the flow increased with illumination, and in others it either decreased or remained unchanged. Overall, there was no statistically significant difference in the conductance to ethane between darkened illuminated plants, and the rates of ethane movement were consistent with an average diffusive conductance to oxygen down the stem of 0.22 × 10^–19m³ s^–1. it was concluded that there was no evidence for thermo-osmotically induced in this case.     

Compressive and tensile mechanical properties of the porcine nasal septum

The expanding nasal septal cartilage is believed to create a force that powers midfacial growth. In addition, the nasal septum is postulated to act as a mechanical strut that prevents the structural collapse of the face under masticatory loads. Both roles imply that the septum is subject to complex biomechanical loads during growth and mastication. The purpose of this study was to measure the mechanical properties of the nasal septum to determine (1) whether the cartilage is mechanically capable of playing an active role in midfacial growth and in maintaining facial structural integrity and (2) if regional variation in mechanical properties is present that could support any of the postulated loading regimens. Porcine septal samples were loaded along the horizontal or vertical axes in compression and tension, using different loading rates that approximate the in vivo situation. Samples were loaded in random order to predefined strain points (2–10%) and strain was held for 30 or 120 seconds while relaxation stress was measured. Subsequently, samples were loaded until failure. Stiffness, relaxation stress and ultimate stress and strain were recorded. Results showed that the septum was stiffer, stronger and displayed a greater drop in relaxation stress in compression compared to tension. Under compression, the septum displayed non-linear behavior with greater stiffness and stress relaxation under faster loading rates and higher strain levels. Under tension, stiffness was not affected by strain level. Although regional variation was present, it did not strongly support any of the suggested loading patterns. Overall, results suggest that the septum might be mechanically capable of playing an active role in midfacial growth as evidenced by increased compressive residual stress with decreased loading rates. However, the low stiffness of the septum compared to surrounding bone does not support a strut role. The relatively low stiffness combined with high stress relaxation under fast loading rates suggests that the nasal septum is a stress dampener, helping to absorb and dissipate loads generated during mastication.     

The dynamics of experimental arable weed communities under different management practices

Abstract. Weed communities, comprising 12 introduced species at constant starting densities and three species already present in the seed bank, were followed through three years of continuous winter wheat. The wheat and weeds were subjected to two treatments in a split-plot factorial design, organic contrasting with conventional fertilizer, and ploughing plus hand-roguing contrasting with minimum tillage plus herbicide. The minimum tilled plots developed in a uniform manner, and became dominated by very high densities of Anisantha sterilis. Agrostemma githago and Galium aparine also persisted in these plots at lower densities. The ploughed plots had a lower total density but a greater range of species. Stellaria media, Veronica persica and Avena fatua were the most common; other species occurred at lower densities. The major effect of fertilizer treatment was a greater initial increase by G. aparine on the organic, minimum tilled plots compared with the conventionally fertilized, minimum tilled plots. Species associated with minimum tillage were annuals with either no or a short term seed bank and autumn germination and rather predictable dynamics, whereas species that did well under ploughing were either spring germinating or had a persistent seed bank, implying greater annual variation in population size associated with weather conditions. There seemed no clear way to distinguish between those species which were abundant on the ploughed plots and those which were scarce under all conditions using readily accessible data.