A high‐throughput method to quantify feeding rates in aquatic organisms: A case study with Daphnia

1. Food ingestion is one of the most basic features of all organisms. However, obtaining precise—and high‐throughput—estimates of feeding rates remains challenging, particularly for small, aquatic herbivores such as zooplankton, snails, and tadpoles. These animals typically consume low volumes of food that are time‐consuming to accurately measure.
2. We extend a standard high‐throughput fluorometry technique, which uses a microplate reader and 96‐well plates, as a practical tool for studies in ecology, evolution, and disease biology. We outline technical and methodological details to optimize quantification of individual feeding rates, improve accuracy, and minimize sampling error.
3. This high‐throughput assay offers several advantages over previous methods, including i) substantially reduced time allotments per sample to facilitate larger, more efficient experiments; ii) technical replicates; and iii) conversion of in vivo measurements to units (mL^‐1 hr^‐1 ind^‐1) which enables broad‐scale comparisons across an array of taxa and studies.
4. To evaluate the accuracy and feasibility of our approach, we use the zooplankton, Daphnia dentifera, as a case study. Our results indicate that this procedure accurately quantifies feeding rates and highlights differences among seven genotypes.
5. The method detailed here has broad applicability to a diverse array of aquatic taxa, their resources, environmental contaminants (e.g., plastics), and infectious agents. We discuss simple extensions to quantify epidemiologically relevant traits, such as pathogen exposure and transmission rates, for infectious agents with oral or trophic transmission.

     

Validating Landsat-based landscape metrics with fine-grained land cover data

ContextModerate-grained data may not always represent landscape structure in adequate detail which could cause misleading results. Certain metrics have been shown to be predictable with changes in scale; however, no studies have verified such predictions using independent fine-grained data.ObjectivesOur objective was to use independently derived land cover datasets to assess relationships between metrics based on fine- and moderate-grained data for a range of analysis extents. We focus on metrics that previous literature has shown to have predictable relationships across scales.MethodsThe study area was located in eastern Connecticut. We compared a 1 m land cover dataset to a 30 m resampled dataset, derived from the 1 m data, as well as two Landsat-based datasets. We examined 11 metrics which included cover areas and patch metrics. Metrics were analyzed using analysis extents ranging from 100 to 1400 m in radius.ResultsThe resampled data had very strong linear relationships to the 1 m data, from which it was derived, for all metrics regardless of the analysis extent size. Landsat-based data had strong correlations for most cover area metrics but had little or no correlation for patch metrics. Increasing analysis areas improved correlations.ConclusionsRelationships between coarse- and fine-grained data tend to be much weaker when comparing independent land cover datasets. Thus, trends across scales that are found by resampling land cover are likely to be unsuitable for predicting the effects of finer-scale elements in the landscape. Nevertheless, coarser data shows promise in predicting fine-grained for cover area metrics provided the analysis area used is sufficiently large.     

Effects of local density and flower colour polymorphism on pollination and reproduction in the rewardless orchid Dactylorhiza sambucina (L.) Soò

The rewardless orchid Dactylorhiza sambucina shows a stable flower colour polymorphism, with both yellow- and red-flowered morphs growing sympatrically. Pollination biology and breeding system were investigated to examine the effects of density of plants, colour polymorphism, inflorescence dimension, and flower position within inflorescence on male and female reproductive success in three natural populations of D. sambucina. There were significant differences among sites in the number of pollinia removed and in fruit set per inflorescence. Number of removed pollinia and capsule production in D. sambucina were independent from flower and inflorescence size or flower position. As a whole, the red morphs showed the highest number of capsules produced, while the yellow morphs had the greatest male success. The relative male and female reproductive success were independent from plant density but were significantly correlated with the yellow morph frequency at the population level. Overall, our findings show that the contribution to the total reproductive success deriving from the two colour morphs does not conform with the predictions of negative frequency-dependent selection.     

Rates of small-scale species mobility in alvar limestone grassland

Abstract. Small-scale species frequency and cumulative species frequency were studied in four plots in limestone grassland of the Veronica spicata-Avenula pratensis association on Stora Alvaret on the Baltic island of Öland, Sweden. Species mobility was expressed as increase in cumulative species frequency in 20 subplots of 100 cm². Observed cumulative frequencies from 1985–1989 in all four plots, and from 1985–1995 in one plot were compared with values following from two null models, a ‘minimal mobility’ model and a random mobility model. In ca. 50 % of the cases the observed cumulative frequency was not significantly different from the random expectation. However, in many such cases the mean annual frequency was either very high or very low. Three ways of calculating the mobility rate are presented though only one is used: (observed cumulative frequency -lowest annual frequency) / expected cumulative frequency. Values × 100 range from 0 to 100. There were slight differences between the four plots which were interpreted in terms of differences in grazing intensity and soil depth. It is stressed that the idea of the Carousel model has never been meant to suggest that all species would show random mobility, which we now quantify, but that species differ in their mobility rate and that the mean rate is much higher than generally realized.     

Evaluation of four-dimensional cone beam computed tomography ventilation images acquired with two different linear accelerators at various gantry speeds using a deformable lung phantom

We evaluated four-dimensional cone beam computed tomography (4D-CBCT) ventilation images (VI_CBCT) acquired with two different linear accelerator systems at various gantry speeds using a deformable lung phantom.The 4D-CT and 4D-CBCT scans were performed using a computed tomography (CT) scanner, an X-ray volume imaging system (Elekta XVI) mounted in Versa HD, and an On-Board Imager (OBI) system mounted in TrueBeam. Intensity-based deformable image registration (DIR) was performed between peak-exhale and peak-inhale images. VI_CBCT- and 4D-CT-based ventilation images (VI_CT) were derived by DIR using two metrics: one based on the Jacobian determinant and one on changes in the Hounsfield unit (HU). Three different DIR regularization values (λ) were used for VI_CBCT. Correlations between the VI_CBCT and VI_CT values were evaluated using voxel-wise Spearman’s rank correlation coefficient (r).In case of both metrics, the Jacobian-based VI_CBCT with a gantry speed of 0.6 deg/sec in Versa HD showed the highest correlation for all the gantry speeds (e.g., λ = 0.05 and r = 0.68). Thus, the r value of the Jacobian-based VI_CBCT was greater or equal to that of the HU-based VI_CBCT. In addition, the ventilation accuracy of VI_CBCT increased at low gantry speeds.Thus, the image quality of VI_CBCT was affected by the change in gantry speed in both the imaging systems. Additionally, DIR regularization considerably influenced VI_CBCT in both the imaging systems. Our results have the potential to assist in designing CBCT protocols, incorporating VI_CBCT imaging into the functional avoidance planning process.     

Functional lung imaging with synchrotron radiation: Methods and preclinical applications

Many lung disease processes are characterized by structural and functional heterogeneity that is not directly appreciable with traditional physiological measurements. Experimental methods and lung function modeling to study regional lung function are crucial for better understanding of disease mechanisms and for targeting treatment. Synchrotron radiation offers useful properties to this end: coherence, utilized in phase-contrast imaging, and high flux and a wide energy spectrum which allow the selection of very narrow energy bands of radiation, thus allowing imaging at very specific energies. K-edge subtraction imaging (KES) has thus been developed at synchrotrons for both human and small animal imaging. The unique properties of synchrotron radiation extend X-ray computed tomography (CT) capabilities to quantitatively assess lung morphology, and also to map regional lung ventilation, perfusion, inflammation and biomechanical properties, with microscopic spatial resolution. Four-dimensional imaging, allows the investigation of the dynamics of regional lung functional parameters simultaneously with structural deformation of the lung as a function of time. This review summarizes synchrotron radiation imaging methods and overviews examples of its application in the study of disease mechanisms in preclinical animal models, as well as the potential for clinical translation both through the knowledge gained using these techniques and transfer of imaging technology to laboratory X-ray sources.     

Study of accumulation behaviour of tungsten based composite using electron probe micro analyser for the application in bone tissue engineering

In this research, a proto-type study we have conducted, where we have synthesized tungsten based composite materials which are tungsten along with combined oxides of other elements like calcium, scandium, barium, and aluminium in the form of powder with bones powder of mice devised by high energy ball mill and later on fabricating high dense pellets by sintering by spark plasma. The particle sizes of the composite materials are found to be 1–2 µm, as evidenced by the electron microscope, suggesting synthesized materials are of micron size. The quantitative and qualitative analysis of sintered pellets are well confirmed by electron probe micro analyzer (EPMA) and energy dispersive X-ray spectrometer (EDS) which illustrate the greater percentage of tungsten presents in the profound scan areas with other elements of the composite. The absence of pores across the 3D geometry suggesting dense sample, which is quite revealed by the X-ray tomography inspection. The prepared sintered pellets from the tungsten based composites are found to be ≈ 99.5% density with the observation of tungsten to be accumulated uniformly across the scan regions along with focussed hot spots as implied by EPMA. This study paves the way, to examine how the tungsten accumulation and the distribution with the other elements for future understanding in bone tissue engineering application and the in vivo specification of tungsten.     

Alcohol consumption by youth: Peers,parents, or prices?

Using data from the National Longitudinal Survey of Adolescent to Adult Health, we estimate the effect of peers’ alcohol consumption and alcohol prices on the drinking habits of high-school-age youth. We use the two-stage residual inclusion method to account for the endogeneity of peer drinking in nonlinear models. For our sample of high school students, we find that peer effects are statistically and economically significant regarding the choice to participate in drinking but are not significant for the frequency of drinking, including binge drinking. Regarding alcohol prices, even though we have good price variation in our sample, alcohol prices are not found to be significant. The results are important for policymakers who are considering policies to reduce underage drinking, as we conclude that no significant impact on underage drinking will result from low-tax states’ increasing excise taxes on alcohol so they are similar to those of high-tax states. Policymakers may choose to focus instead on the influence of peers and changing the social norm behavior.