Monitoring with lichens – Conductivity methods assess salt and heavy metal damage more efficiently than chlorophyll fluorescence

In the lab, we exposed three foliose lichen species, Lobaria pulmonaria, Parmelia sulcata and Xanthoria aureola, to 0, 0.01, 0.2, and 0.6 M NaCl in combinations with copper and zinc (0, 10, 100, 500 μM). High salt concentrations adversely affected the lichen membrane integrity as measured by conductivity methods, whereas the potential photosystem II efficiency (Fv/Fm) was tolerant. High light was necessary to reduce Fv/Fm in thalli exposed to salt, whereas high light did not aggravate the conductivity. The seashore species X. aureola was much more resistant to salt than the old forest species L. pulmonaria. With respect to Cu and Zn, used concentrations had no (P. sulcata, X. aureola) or small (L. pulmonaria) effects on Fv/Fm. However, both heavy metals substantially increased conductivity in all species, consistent with membrane damage. Thus, the conductivity method detected high salt, high copper and high zinc stress much more efficiently than did the chlorophyll fluorescence method. This suggests that membrane integrity of the mycobiont is more sensitive to salt and heavy metal stress than potential photosystem II efficiency of its autotrophic partners.     

A New Approach to Undergraduate Biology

The use of a common pathogenic vegetable soft-rot bacterium Erwinia carotovora is recommended for school student investigations. Suggestions are made about simple ways in which quantitative data can be collected, as well as some suitable investigations that could be carried out by school pupils at Key Stage 4(15–16 years old) or Advanced level.     

Stepwise oscillatory circuits of a DNA molecule

A DNA molecule is characterized by a stepwise oscillatory circuit where every base pair is a capacitor, every phosphate bridge is an inductance, and every deoxyribose is a charge router. The circuitry accounts for DNA conductivity through both short and long distances in good agreement with experimental evidence that has led to the identification of the so-called super-exchange and multiple-step hopping mechanisms. However, in contrast to the haphazard hopping and super-exchanging events, the circuitry is a well-defined charge transport mechanism reflecting the great reliability of the genetic substance in delivering electrons. Stepwise oscillatory charge transport through a nucleotide sequence that directly modulates the oscillation frequency may have significant biological implications.     

Determination of aqueous two-phase system phase-forming components in the presence of bovine serum albumin

In the current work, the quantification of different poly(ethylene glycol) (PEG)–potassium phosphate/sodium citrate aqueous two-phase system (ATPS) phase-forming components was investigated by using conductivity and refractive index measurements. For this purpose, refractive index and conductivity calibration curves were obtained for ATPS at different pH values in the presence of different bovine serum albumin (BSA) concentrations. Whereas BSA had no effect on the conductivity, it had a considerable effect on the refractive index. Finally, a convenient dilution of the samples prior to the ATPS constituent determination is needed to ensure no significant influence from BSA.     

Influence of most reactive inorganic cation in the optical and biological activities of L-Lysine monohydrochloride crystal

Slow evaporation method was used to grow the pure and K⁺ ion doped L-Lysine monohydrochloride (L-LMHCL) crystals which has optical and antibiotic applications. The space group, structure and slight shifting of peaks are confirmed using single crystal XRD and the powder XRD. The FTIR analysis also shows that the K⁺ doped L-LMHCL has a slight shifting in the spectrum which indicates the functional group of L-LMHCL and the interaction between the K⁺ ions. The existence of K⁺ ion in the doped crystal is assured by the presence of potassium in the EDAX spectrum. The wide optical band gap was found for pure and K⁺ doped crystal using UV spectra and these are utilized in optoelectronic and nonlinear applications. The Kurtz Perry technique specified the NLO property of grown crystals. The dielectric property crystals was studied by varying the temperature. As a result, the highest dielectric constant is observed in doped crystal. An antibacterial activity against certain bacteria like E-coli, pseudomonas aeruginosa and staphylococcus aureus are provided by mm range for the grown crystals.     

The dielectric permittivity at radio frequencies and the bruggeman probe: novel techniques for the on-line determination of biomass concentrations in plant cell cultures

A novel technique is described for the measurement of the volume fraction of biomass in a suspension by the simultaneous measurement of the conductivity of a suspension containing cells and of the medium in which the cells are suspended. The presence of non-conducting particulate matter in a suspension will cause the conductivity of a suspension to be decreased relative to that of the medium in which the particles are suspended. A simple equation (the Bruggeman equation) describes the relationship between the volume fraction of non-conducting particulate matter and the decrease in conductivity. The accuracy of this method for the determination of the biomass concentration of plant cells (Festuca arundinacea) in culture was shown. The method was successfully applied to the on-line determination of biomass concentrations during the growth of F. arundinacea cultures, and gave good agreement with biomass levels as determined from measurements of the radio-frequency dielectric permittivity of such cultures.     

Dielectric analysis of mitochondria isolated from rat liver II. Intact mitochondria as simulated by a double-shell model

The dielectric dispersion of isolated intact mitochondria in suspension has been measured between 10 kHz and 500 MHz. In isotonic KCI media at 4°C, the mitochondria maintained their characteristic ‘double membrane’ structure as examined by electron microscopy, and the observed dispersion curves were successfully simulated in terms of a superposition of two sub-dispersions having different characteristic frequencies and different permittivity magnitudes. Taking these observations into account we analyzed the dispersion data on the basis of a ‘double-shell’ model in which two concentric shells are meant to represent the mitochondrial outer and inner membranes. The analyses by a computerized curve-fitting method revealed that: (i) electric capacities for the outer and the inner membrane are 1.7 and 0.5 μF/cm², respectively, (ii) relative permittivity for the inner compartment (or the equivalent homogeneous matrical space) = 50–60, (iii) outer compartment-to-external conductivity ratio = 0.4–0.6, and (iv) inner compartment-to-external conductivity ratio = 0.14. The implications of these parameter values are discussed with due attention paid to the limitations inherent in our ‘double-shell’ model approach.     

Passive electrical properties of Halobacterium species

The electrical conductivity of suspensions of two species of Halobacterium was measured at low A. C. frequency. The results obtained fromHalobacterium halobium suspensions show that the bacteria act as non-conducting particles. In contrast, the cells of a Halobacterium obtained from the Dead Sea (Halobacterium marismortui) had an apparently high conductivity which can be explained partly in terms of the cell-membrane being pierced by pores through which ions can move freely and partly in terms of highly concentrated cell ions, all of which are mobile.     

Long term lily scale bulblet storage: effects of temperature and storage in polyethylene bags

Collections of lily genotypes are usually maintained by yearly planting, harvesting and storage of the bulbs. To facilitate this maintenance, a storage method has been developed for a collection of lily genotypes, including Asiatic hybrids, Oriental hybrids, Lilium longiflorum and L. henryi. Scale bulblets were stored either dry, sealed air-tight in polyethylene bags, or in moist vermiculite in open polyethylene bags for a period of 2 yr. The decrease in mass, sprouting proportion and ion leakage or sprouting proportion alone were determined for treatments carried out at -2°C, °C and 17°C. Sealing scale bulblets in polyethylene bags at -2°C resulted in the smallest decrease in mass, the least ion leakage and the highest sprouting proportion after 2 yr of storage.     

Conductance and relaxations of gelatin films in glassy and rubbery states

The dielectric constant, ′, and the dielectric loss, ″, for gelatin films were measured in the glassy and rubbery states over a frequency range from 20 Hz to 10 MHz; ′ and ″ were transformed into M* formalism (M*=1/(′−i″)=M′+iM″; i, the imaginary unit). The peak of ″ was masked probably due to dc conduction, but the peak of M″, e.g. the conductivity relaxation, for the gelatin used was observed. By fitting the M″ data to the Havriliak–Negami type equation, the relaxation time, τ_HN, was evaluated. The value of the activation energy, E_τ, evaluated from an Arrhenius plot of 1/τ_HN, agreed well with that of E_σ evaluated from the DC conductivity σ₀ both in the glassy and rubbery states, indicating that the conductivity relaxation observed for the gelatin films was ascribed to ionic conduction. The value of the activation energy in the glassy state was larger than that in the rubbery state.