Somatic hybridization between male sterile Nicotiana tabacum and N. glutinosa through protoplast fusion

Summary Protoplasts derived from suspension cultured cells of cytoplasmic male sterile Nicotiana tabacum (N. debneyi cytoplasm) and of fertile N. glutinosa were fused with the aid of polyethylene glycol (PEG). Out of 1,089 colonies developed from PEG-treated protoplasts, 29 restored whole plants.A somatic hybrid plant was selected on the basis of isoelectrofocusing analysis of Fraction I protein in leaves of regenerated plants. A newly created hybrid contained small subunits of both parents but only a N. glutinosa type large subunit.Male sterile character was conserved in a hybrid plant while leaf morphology was intermediate between the parents. By tobacco mosaic virus infection tests, the hybrid's leaves showed resistant symptoms, hypersensitive local lesions, which were due to N. glutinosa nuclear genome expression.Abbreviations PEG Polyethylene glycol - TMV Tobacco mosaic virus     

Stress-related levels of abscisic acid in guard cell protoplasts of Vicia faba L.

Levels of abscisis acid (ABA) were determined in isolated guard cell (GCP) and mesophyll cell (MCP) protoplasts of Vicia faba L. in relation to water stress. Incubation of GCP and MCP in 0.4 M or 0.8 M mannitol resulted in an average increase in the level of free abscisic acid (ABA) in the cells of 34% (GCP) and 38% (MCP) within 15–60 min. It is concluded that guard cell protoplasts form ABA in response to osmotic stress.Abbreviations ABA abscisic acid - BHT butylated hydroxytoluene - GCP guard cell protoplasts - MCP mesophyll cell protoplasts - MES [2-(N-morpholino)-ethanesulfonic acid] - TLC thin layer chromatography Part 20 in the series, Use of Immunoassay in Plant Science     

High frequency fusion of plant protoplasts by electric fields

Mesophyll cell protoplasts of Vicia faba were collected by dielectrophoresis in a highly inhomogeneous alternating electric field (sine wave, 5 to 10 V peak-to-peak value, 500 kHz, electrode distance 200 m). Under these conditions, the cells formed aggregates of two or three on the electrodes or bridges consisting of 4 to 6 protoplasts between the electrodes. This pearl chain arrangement of the cells was only stable for the duration of the applied field. By the additional application of a high single field pulse (square wave, 15 V, 50 s), it was possible to induce cell fusion within the aggregates or bridges. This electrically stimulated fusion of cells proceeded at room temperature and under physiological pH-conditions, without the use of chemical reagents, and gave a high yield. Smaller fused aggregates formed spheres within a few minutes. During the dielectrophoretically induced adhesion of the protoplasts to one another, the field strength must be chosen such that dielectric breakdown of the membrane is avoided, but at the same time, the strength of the subsequently applied single field pulse must be high enough to induce dielectric breakdown at the sites of contact between the protoplast membranes. From these results, one can conclude that in addition to close contact between membranes, the prerequisite for electrically stimulated cell fusion is dielectric breakdown which leads to changes in the membrane conductance, permeability, and probably fluidity.Presented at II Congress FESPP, Santiago de Compostela, Spain, 27.7.–1.8.1980, and Gordon Research Conference of Bioelectrochemistry, Tilton, New Hampshire, USA, 4.8.–8.8.1980     

Dark requirement for cell regeneration and colony formation by mesophyll protoplasts ofNicotiana plumbaginifolia Viv.

Summary The protoplasts ofNicotiana plumbaginifolia required darkness for cell regeneration and colony formation. Maximal plating efficiency of the protoplasts could be achieved by keeping the cultures in dark instead of light or dark/light sequence. Only two days of darkness prior to the illumination at 400 or 3,000 lux resulted in appreciable plating efficiency, than those of light from the beginning, but these values could not match the high plating efficiency in total darkness.     

Membranes of the protoplast L-form of Proteus mirabilis

Isolated membranes of the cell wall-less stable protoplast L-form of Proteus mirabilis were characterized by density gradient centrifugation and by assay for their major chemical constituents, proteins, phospholipids and lipopolysaccharide, and for some specific marker enzymes of the cytoplasmic membrane. In most of the analyzed properties the L-form protoplast membrane resembled the bacterial cytoplasmic membrane, with some notable modifications. considerable amounts of lipopolysaccharide, normally an exclusive constituent of the outer membrane, were found. Furthermore, the L-form membranes contained the functions of the reduced nicotinamide adenine dinucleotide oxidase system, of d-lactate dehydrogenase (EC 1.1.1.28) and of succinate dehydrogenase (EC 1.3.99.1) at specific activities comparable to, or in some cases considerably higher than, those present in cytoplasmic membranes of the bacterial form. Of two peptidoglycan DD-carboxypetidase/transpeptidases (EC 3.4.17.8 and EC 2.3.2.10), which are normally present in the cytoplasmic membrane of the bacterial form of P. mirabilis, the membrane of the protoplast L-form contained only one. Electron microscopy of thin sectioned L-form protoplasts showed extensive heterogeneity of membraneous structures. In addition to the single membraneous integument, internal membrane-bounded vesicles and multiple stacks of membranes were present, as the result of unbalanced growth and membrane synthesis in the L-form state.     

Fusion of Avena sativa mesophyll cell protoplasts by electrical breakdown

Studies with the light microscope were carried out on mesophyll cell protoplasts of Avena sativa which had been made to undergo fusion by reversible electrical breakdown of the cell membrane. In order to establish close membrane contact between the cells, an important prerequisite for fusion, a method known as dielectrophoresis was used. In an inhomogeneous alternating electrical field the protoplasts adhere to the electrodes and to each other in the direction of the field lines. The cells which were thus brought into close contact with each other could be made to fuse by the application of a field pulse of high amplitude (about 750 V/cm) and short duration (20–50 μs). The field strength required for fusion exceeds the value necessary for the electrical breakdown of the cell membrane. Fusion took place within some minutes and led to a high yield of fused protoplasts. The fusion of cells being in the electric field occured in a synchronous manner. In some of the fusion experiments part of the protoplasts of A. sativa were stained with neutral red. When these cells were fused with unstained protoplasts, the vacuoles from the different cells within the fused aggregate could be shown to remain separate for quite some time.     

Somatic hybrids between unilateral cross-incompatible Petunia species

Summary Somatic hybrid plants regenerated following the fusion of leaf mesophyll protoplasts of Petunia parodii with those isolated from a cell suspension of albino P. inflata. These two species exhibit a unilateral cross-incompatability with a pre-zygotic mode of reproductive isolation preventing hybridizations with P. inflata as the maternal parent. Selection of somatic hybrids relied on the fact that unfused or homokaryon protoplasts of P. parodii did not develop beyond the cell colony stage while those of the putative somatic hybrids and albino P. inflata parent produced callus. Green somatic hybrid calluses were readily identified against the white background of P. inflata following complementation to chlorophyll synthesis proficiency and continued growth in hybrid cells. Shoots, and ultimately flowering plants, were identified as somatic hybrids based on their floral morphology and colour, chromosome number and the fact that they segregated for parental characters. The frequency of somatic hybrid production was comparable to that previously established for two sexually compatible Petunia species.     

Experession and integration of genes introduced into highly synchronized plant protoplasts

Summary Chimaeric genes containing the chloramphenicol acetyltransferase (CAT) coding sequence were introduced into protoplasts of suspension-cultured tobacco cells using improved conditions of electroporation (Okada et al. 1986). CAT activity became detectable in the protoplasts within 3 h, was maximal during a period of 18–36 h after electroporation, and then declined gradually. Alpha-amanitin added to the medium abolished the transient expression of the CAT gene. The closed circular form of input DNA was as effective as the linear form for the transient expression. The suspension culture was treated with aphidicolin, and S, G₂, M and G₁ phases were identified in the highly synchronized cell cycle obtained by releasing the cells from the inhibition of DNA synthesis. When a chimacric CAT gene was introduced into M phase protoplasts prepared from the synchronized culture, the transient expression of the CAT gene was 3–4 times higher than when it was introduced into protoplasts of other cell cycle phases. The frequency of stable transformation with a chimaeric neomycin phosphotransferase II gene was studied using the same system. G-418-resistant transformants were obtained from M phase protoplasts at frequencies 2–8 times those obtained from protoplasts at other cell cycle phases. The results indicate that the absence of the nuclear membrane in mitotic cells favours delivery to the nucleus of exogenous DNA introduced into the cytoplasm.     

原生质体诱变选育高产异抗坏血酸菌株

以灰黄青霉菌(Penicillium griseofulvum HL)为出发菌株,试验得到灰黄青霉原生质体制备的优化条件为:菌体培养48h,用0.7mol/L的NaC1溶液作为渗透压稳定剂,用0.5％的蜗牛酶+0.5％的纤维素酶,在pH为6,30℃条件下酶解3h,所得原生质体数最多,达到3.14×107/ml.原生质体再生的最佳条件为采用双层平板培养法,在用0.7mol/L的蔗糖溶液配制的改进察氏培养基上其再生率最高,达到24.93％.灰黄青霉原生质体经过紫外线诱变,DES诱变,紫外线-DES诱变复合诱变,紫外线-氯化锂复合诱变选育异抗坏血酸高产菌株,通过对再生平板上长出的诱变菌株进行初筛和摇瓶复筛,最终获得一株异抗坏血酸产量较高的菌株ZD4,其产量为5.28mg/ml,提高到出发菌株产量(1.08 mg/ml)的488.9％,且连续传代6代遗传稳定.