Establishment of the neotropical predator Amblyseius idaeus (Acari: Phytoseiidae) in Benin,West Africa

Populations of the phytoseiid predator Amblyseius(=Neoseiulus) idaeus (Denmark & Muma) from northeastern Brazil, have been successfully introduced into Benin, West Africa, as part of a classical biological control campaign to control the exotic cassava green mite Mononychellus tanajoa (Bondar). Monthly follow‐up surveys revealed the presence of A. idaeus in most release sites. Some populations have persisted for at least 18 months, including two cycles of potentially limiting wet and dry season conditions. In some sites A. idaeus has been the numerically dominant phytoseiid predator on cassava Manihot esculenta, where it is associated with the tetranychids M. tanajoa and Oligonychus gossypii Zacher. During periods of low M. tanajoa densities A. idaeus disappeared from cassava, but were found on weeds with O. gossypii until prey densities on cassava increased.     

Cardboard nesting cavities may promote the development of Osmia cornuta and reduce infestation of kleptoparasitic mites

Mason bees (Osmia spp.) are receiving increasing attention as they are very effective pollinators of multiple crops. However, different bee-associated kleptoparasites are known which can be detrimental to the development of the bees’ offspring. To date, clear evidence-based guidelines to control these kleptoparasites are lacking for growers. This study investigates whether different types of artificial nesting materials—cardboard tubes and wooden grooved boards—influence the development of the European orchard bee (Osmia cornuta) as well as the infestation rate of kleptoparasitic mites in the bees’ nest. This preliminary study provides insight that cardboard tubes reduce the infestation rate of mites by 81.8% and as such promote successful development of the European orchard bee by 15.5%. Using cardboard tubes over wooden grooved boards should be advised to growers as an effective management strategy to avoid infestation of kleptoparasitic mites and to enhance successful bee development.     

Elevationally biased avian predation as a contributor to the spatial distribution of geometrid moth outbreaks in sub‐arctic mountain birch forest

1. Population dynamics and interactions that vary over a species' range are of particular importance in the context of latitudinal clines in biological diversity. Winter moth (Operophtera brumata) and autumnal moth (Epirrita autumnata) are two species of eruptive geometrids that vary widely in outbreak tendency over their range, which generally increases from south to north and with elevation. 2. The predation pressure on geometrid larvae and pupae over an elevational gradient was tested. The effects of background larval density and bird occupancy of monitoring nest boxes on predation rates were also tested. Predation on larvae was tested through exclusion treatments at 20 replicate stations over four elevations at one site, while pupae were set out to measure predation at two elevations at three sites. 3. Larval densities were reduced by bird predation at three lower elevations, but not at the highest elevation, and predation rates were 1.9 times higher at the lowest elevation than at the highest elevation. The rate of predation on larvae was not related to background larval density or nest box occupancy, although there were more eggs and chicks at the lowest elevation. There were no consistent differences in predation on pupae by elevation. 4. These results suggest that elevational variation in avian predation pressure on larvae may help to drive elevational differences in outbreak tendency, and that birds may play a more important role in geometrid population dynamics than the focus on invertebrate and soil predators of previous work would suggest.     

Insect clocks: implication in an effective pest management

Abstract

Circadian rhythms are endogenous, and synchronize biological functions at the most suited time of the day. Insects like other organism display a wide array of circadian functions, which are controlled by a central timing system, in coordination with the peripheral clocks found in many tissues. Many insect behaviours including locomotion, courtship, mating, egg laying and photoperiodism, are influenced by the circadian systems. In this mini-review, we briefly describe the involvement of circadian clocks in various physiological processes and correlate their functions in insect life, focusing on lepidopteran pests (major group of Indian crop pests) and discuss their role(s) in the development of effective pest management strategy.     

Current trends and future directions in flower development research

Flowers, the reproductive structures of the approximately 400 000 extant species of flowering plants, exist in a tremendous range of forms and sizes, mainly due to developmental differences involving the number, arrangement, size and form of the floral organs of which they consist. However, this tremendous diversity is underpinned by a surprisingly robust basic floral structure in which a central group of carpels forms on an axis of determinate growth, almost invariably surrounded by two successive zones containing stamens and perianth organs, respectively. Over the last 25 years, remarkable progress has been achieved in describing the molecular mechanisms that control almost all aspects of flower development, from the phase change that initiates flowering to the final production of fruits and seeds. However, this work has been performed almost exclusively in a small number of eudicot model species, chief among which is Arabidopsis thaliana. Studies of flower development must now be extended to a much wider phylogenetic range of flowering plants and, indeed, to their closest living relatives, the gymnosperms. Studies of further, more wide-ranging models should provide insights that, for various reasons, cannot be obtained by studying the major existing models alone. The use of further models should also help to explain how the first flowering plants evolved from an unknown, although presumably gymnosperm-like ancestor, and rapidly diversified to become the largest major plant group and to dominate the terrestrial flora. The benefits for society of a thorough understanding of flower development are self-evident, as human life depends to a large extent on flowering plants and on the fruits and seeds they produce. In this preface to the Special Issue, we introduce eleven articles on flower development, representing work in both established and further models, including gymnosperms. We also present some of our own views on current trends and future directions of the flower development field.     

Low-volume application by mist-blower compared with conventional compression sprayer treatment of houses with residual pyrethroid to control the malaria vector Anopheles albimanus in Mexico

Abstract. Village-scale trials were carried out in southern Mexico to compare the efficacy of indoor-spraying of the pyrethroid insecticide lambda-cyhalothrin applied either as low-volume (LV) aqueous emulsion or as wettable-powder (WP) aqueous suspension for residual control of the principal coastal malaria vector Anopheles albimanus. Three indoor spray rounds were conducted at 3-month intervals using back-pack mist-blowers to apply lambda-cyhalothrin 12.5 mg a.i./m² by LV, whereas the WP was applied by conventional compression sprayer at a mean rate of 26.5 mg a.i./m².
Both treatments caused mosquito mortality indoors and outdoors (collected inside house curtains) as a result of contact with treated surfaces before and after feeding, but had no significant impact on overall population density of An. albimanus resting indoors or assessed by human bait collections. Contact bioassays showed that WP and LV treatments with lambda-cyhalothrin were effective for 12–20 weeks (>75% mortality) without causing excito-repellency.
Compared to the WP treatment (8 houses/man/day), LV treatment (25 houses/man/day) was more than 3 times quicker per house, potentially saving 68% of labour costs. This is offset, however, by the much lower unit price of a compression sprayer (e.g. Hudson 'X-pert' at US120) than a mist-blower (e.g. 'Super Jolly' at US350), and higher running costs for LV applications. It was calculated, therefore, that LV becomes more economical than WP after 18.8 treatments/100 houses/10 men at equivalent rates of application, or after 7.6 spray rounds with half-rate LV applications.     

Sterilization of Hulecoeteomyia japonica japonica (= Aedes japonicus japonicus) (Theobald, 1901) by high‐energy photon irradiation: implications for a sterile insect technique approach in Europe

Hulecoeteomyia japonica japonica (= Aedes japonicus japonicus) (Diptera: Culicidae) (Theobald 1901), a container‐breeding invasive species in North America and Europe, is attracting particular attention for its high local abundances and possible roles in the transmission of human and animal pathogens. The preferential habitats of this species are forested and bushy areas, which renders control measures extremely inefficient. Use of the sterile insect technique (SIT) may contribute to the implementation of area‐wide integrated pest management strategies, as has been successfully proven with other aedine mosquito species. The present study investigates the effects of irradiation at a dose of 40 Gy on fitness parameters in H. j. japonica. Irradiation was performed on 16–24‐h‐old pupae from a colonized strain (PA) using a TrueBeam linear accelerator. Males from the PA strain were crossed with females of the same colony or with field‐collected females. Irradiation induced a slight increase in mortality in male pupae, but did not alter the survival and mating abilities of emerging adult males. Rates of blood feeding and fertility were lower when PA strain males were kept with field‐collected females rather than PA females. Irradiated males induced reductions in fertility (residual fertility: 2.6%) and fecundity in mated females. The data indicate that the SIT is a suitable technique to enhance the control of this species.     

Natural enemy impacts on Bemisia tabaci (MEAM1) dominate plant quality effects in the cotton system

1. Plant quality (bottom‐up effects) and natural enemies (top‐down effects) affect herbivore performance. Furthermore, plant quality can also influence the impact of natural enemies. 2. Lower plant quality through reduced irrigation increased the abundance of the cryptic species from the Bemisia tabaci complex [hereafter B. tabaci Middle East Asia Minor 1 (MEAM1)], but not its natural enemies on cotton. It was therefore predicted that lower plant quality would diminish the impact of natural enemies in regulating this herbivore. 3. Over three cotton seasons, plant quality was manipulated via differential irrigation and natural enemy abundance with insecticides. Life tables were used to evaluate the impact of these factors on mortality of immature B. tabaci (MEAM1) over nine generations. 4. Mortality of B. tabaci (MEAM1) was consistently affected by natural enemies but not by plant quality. This pattern was driven by high levels of sucking predation, which was the primary (key) factor associated with changes in immature mortality across all irrigation and natural enemy treatments. Dislodgement (chewing predation and weather) and parasitism contributed as key factors in some cases. Analyses also showed that elimination of sucking predation and dislodgement would have the greatest effect on overall mortality. 5. The top‐down effects of natural enemies had dominant effects on populations of B. tabaci (MEAM1) relative to the bottom‐up effects of plant quality. Effects were primarily due to native generalist arthropod predators and not more host‐specific aphelinid parasitoids. The findings of this study demonstrate the important role of arthropod predators in population suppression and validate the importance of conservation biological control in this system for effective pest control.