Biofouling control in water by various UVC wavelengths and doses

UV light irradiation is being increasingly applied as a primary process for water disinfection, effectively used for inactivation of suspended (planktonic) cells. In this study, the use of UV irradiation was evaluated as a pretreatment strategy to control biofouling. The objective of this research was to elucidate the relative effectiveness of various targeted UV wavelengths and a polychromatic spectrum on bacterial inactivation and biofilm control. In a model system using Pseudomonas aeruginosa, the inactivation spectra corresponded to the DNA absorption spectra for all wavelengths between 220 and 280 nm, while wavelengths between 254 nm and 270 nm were the most effective for bacterial inactivation. Similar wavelengths of 254-260-270 nm were also more effective for biofilm control in most cases than targeted 239 and 280 nm. In addition, the prevention of biofilm formation by P. aeruginosa with a full polychromatic lamp was UV dose-dependent. It appears that biofilm control is improved when larger UV doses are given, while higher levels of inactivation are obtained when using a full polychromatic MP lamp. However, no significant differences were found between biofilms produced by bacteria that survived UV irradiation and biofilms produced by control bacteria at the same microbial counts. Moreover, the experiments showed that biofilm prevention depends on the post-treatment incubation time and nutrient availability, in addition to targeted wavelengths, UV spectrum and UV dose.     

Elasticity and physico-chemical properties during drinking water biofilm formation

Atomic force microscope techniques and multi-staining fluorescence microscopy were employed to study the steps in drinking water biofilm formation. During the formation of a conditioning layer, surface hydrophobic forces increased and the range of characteristic hydrophobic forces diversified with time, becoming progressively complex in macromolecular composition, which in return triggered irreversible cellular adhesion. AFM visualization of 1 to 8 week drinking water biofilms showed a spatially discontinuous and heterogeneous distribution comprising an extensive network of filamentous fungi in which biofilm aggregates were embedded. The elastic modulus of 40-day-old biofilms ranged from 200 to 9000 kPa, and the biofilm deposits with a height >0.5 μm had an elastic modulus <600 kPa, suggesting that the drinking water biofilms were composed of a soft top layer and a basal layer with significantly higher elastic modulus values falling in the range of fungal elasticity.     

The effects of metabolite molecules produced by drinking water-isolated bacteria on their single and multispecies biofilms

The elucidation of the mechanisms by which diverse species survive and interact in drinking water (DW) biofilm communities may allow the identification of new biofilm control strategies. The purpose of the present study was to investigate the effects of metabolite molecules produced by bacteria isolated from DW on biofilm formation. Six opportunistic bacteria, viz. Acinetobacter calcoaceticus, Burkholderia cepacia, Methylobacterium sp., Mycobacterium mucogenicum, Sphingomonas capsulata and Staphylococcus sp. isolated from a drinking water distribution systems (DWDS) were used to form single and multispecies biofilms in the presence and absence of crude cell-free supernatants produced by the partner bacteria. Biofilms were characterized in terms of mass and metabolic activity. Additionally, several physiological aspects regulating interspecies interactions (sessile growth rates, antimicrobial activity of cell-free supernatants, and production of iron chelators) were studied to identify bacterial species with biocontrol potential in DWDS. Biofilms of Methylobacterium sp. had the highest growth rate and M. mucogenicum biofilms the lowest. Only B. cepacia was able to produce extracellular iron-chelating molecules. A. calcoaceticus, B. cepacia, Methylobacterium sp. and M. mucogenicum biofilms were strongly inhibited by crude cell-free supernatants from the other bacteria. The crude cell-free supernatants of M. mucogenicum and S. capsulata demonstrated a high potential for inhibiting the growth of counterpart biofilms. Multispecies biofilm formation was strongly inhibited in the absence of A. calcoaceticus. Only crude cell-free supernatants produced by B. cepacia and A. calcoaceticus had no inhibitory effects on multispecies biofilm formation, while metabolite molecules of M. mucogenicum showed the most significant biocontrol potential.     

Population diversity in model potable water biofilms receiving chlorine or chloramine residual

Abstract

Most water utilities use chlorine or chloramine to produce potable water. These disinfecting agents react with water to produce residual oxidants within a water distribution system (WDS) to control bacterial growth. While monochloramine is considered more stable than chlorine, little is known about the effect it has on WDS biofilms. Community structure of 10-week old WDS biofilms exposed to disinfectants was assessed after developing model biofilms from unamended distribution water. Four biofilm types were developed on polycarbonate slides within annular reactors while receiving chlorine, chloramine, or inactivated disinfectant residual. Eubacteria were identified through 16S rDNA sequence analysis. The model WDS biofilm exposed to chloramine mainly contained Mycobacterium and Dechloromonas sequences, while a variety of alpha- and additional beta-proteobacteria dominated the 16S rDNA clone libraries in the other three biofilms. Additionally, bacterial clones distantly related to Legionella were found in one of the biofilms receiving water with inactivated chlorine residual. The biofilm reactor receiving chloraminated water required increasing amounts of disinfectant after 2 weeks to maintain chlorine residual. In contrast, free chlorine residual remained steady in the reactor that received chlorinated water. The differences in bacterial populations of potable water biofilms suggest that disinfecting agents can influence biofilm development. These results also suggest that biofilm communities in distribution systems are capable of changing in response to disinfection practices.     

Molecular Dynamics Study on Protein and it's Water Structure at High Pressure

Abstract

We have performed NPT molecular dynamics simulations (Langevin Piston Method) on two types of solvated proteins-‘denaturation-unfavorable’ protein (insulin) and ‘denaturation-favorable protein’ (ribonuclease A) at high pressure (from 1 bar up to 20 kbar). The method is based on the extended system formalism introduced by Andersen, where the deterministic equations of motion for the piston degree of freedom are replaced by Langevin equation. We report the structural changes of proteins (ribonuclease A and insulin) and water molecules through radius of gyration, solvent accessible surface area, hydrogen bond pattern, and the topology of water clusters connected by the hydrogen bonded circular network. The solvent accessibility of ribonuclease A is mainly decreased by hydrophilic residues rather than hydrophobic residues under high pressure. From the results of hydrogen bond analysis, we have found that α-helix is more stable than β-sheet under high pressure. In addition, from the analysis of the water cluster, we have observed that for ribonuclease A, 5-membered ring structure is more favorable than 6-membered ring at higher pressure. However, for insulin, the ratio of 5 to 6-ring is constant over the pressure ranges for which we have performed MD simulation. This indicates that the water structure around insulin does not change under high pressure.     

Hydrogen bond analysis of confined water in mesoporous silica using the reactive force field

ABSTRACT

The structural and dynamical properties of water confined in nanoporous silica with a pore diameter of 2.7?nm were investigated by performing large-scale molecular dynamics simulations using the reactive force field. The radial distribution function and diffusion coefficient of water were calculated, and the values at the centre of the pore agreed well with experimental values for real water. In addition, the pore was divided into thin coaxial layers, and the average number of hydrogen bonds, hydrogen bond lifetime and hydrogen bond strength were calculated as a function of the radial distance from the pore central axis. The analysis showed that hydrogen bonds involving silanol (Si–OH) have a longer lifetime, although the average number of hydrogen bonds per atom does not change from that at the pore centre. The longer lifetime, as well as smaller diffusion coefficient, of these hydrogen bonds is attributed to their greater strength.     

Molecular Dynamics Simulations of Proteins in Water Without the Truncation of Long-range Coulomb Interactions

A new program package (COSMOS90) for molecular dynamics simulations was developed to simulate large molecular systems consisting of more than tens of thousands of atoms without the truncation of long-range coulomb interactions. This program package was based on a new approximation scheme (PPPC) for calculating efficiently the coulomb interactions without sacrificing accuracy. In this approximation scheme, the group of charges at a long distance from each atom was represented by a total charge and total dipole moment of the group. In order to assess the accuracy of PPPC and the ability of COSMOS90, molecular dynamics simulations were carried out for a large system consisting of 16108 atoms (human lysozyme in water) for 50 ps using this program package. The coulomb energy per solute atom was calculated with only five percent of the error found in the 10 Å cut-off approximation (about 0.9 kcal/mol versus 18 kcal/mol, respectively). The molecular dynamics simulations using COSMOS90 require no more CPU time than the simulations based on the 10 Å cut-off approximation of the conventional programs for macromolecular simulations.     

UVC fluencies for preventative treatment of Pseudomonas aeruginosa contaminated polymer tubes

Exposing Pseudomonas aeruginosa biofilm grown on the inner surface of Teflon and silicone tubes to UVC light (265 nm) from light emitting diodes (LED) has previously been shown to substantially reduce biofilm growth. Smaller UVC fluencies were required to disinfect Teflon tubes compared to silicone tubes. Light propagation enhancement in tubes can be obtained if the refractive index of the intra-luminal saline solution is higher than that of the polymer. This condition is achieved by using Teflon tubes with a low refractive index (1.34) instead of the polymers with a high refractive index (1.40–1.50) normally used for tubing in catheter production. Determining whether or not UVC light exposure can disinfect and maintain the intra-luminal number of colony forming units (CFUs) at an exceedingly low level and thus avoid the growth and establishment of biofilm is of interest. The use of UVC diodes is demonstrated to be a preventative disinfection treatment on tubes made of Teflon, which enhances the UVC light propagation, and on tubes made of a softer material, ethylene vinyl acetate (EVA), which is suitable for catheters but much less suitable for UVC light propagation. Simulating an aseptic breach (～10³–10⁴ CFU ml^?1), the UVC disinfection set-up was demonstrated using tubes contaminated with planktonic P. aeruginosa. After the tubes (10–20 cm) were inoculated with the bacterial solution for 3 h, they were emptied and filled with saline solutions (0.9–20%). Next UVC fluencies (0–21 mJ cm^?2) were applied to the tubes 3 h after inoculation. Colony counts were carried out on liquid samples drawn from the tubes the first day after UVC treatment and liquid and surface samples were collected and analyzed 3–4 days later. A fluence of approximately 1.0 mJ cm^?2 was noted as being sufficient for no growth for a period of 3–4 days for the Teflon tubes. Determining the fluence threshold for the EVA tubes was not possible. Almost all of the UVC-treated EVA tubes were disinfected simply by filling the tubes with a saline solution. Direct UVC treatment of the contaminated EVA tubes revealed, however, that a fluence of 21 mJ cm^?2 killed the bacteria present in the tubes and kept them disinfected for a period of 3–4 days.     

On the Implementation of Friedman Boundary Conditions in Liquid Water Simulations

Abstract

We have applied the image approximation to the reaction field as suggested by H.L. Friedman [Mol. Phys., 29, 1533 (1975)] by investigating appropriate cavity sizes and system parameters for use in molecular simulations. The energy of and the structure around a central simple point charge (SPC) water molecule in a dielectric cavity was found to be in good agreement with the properties of a liquid sample. To confine the water molecules within the cavity, we introduced a short-range repulsion between a real charge and its image as the Lennard-Jones repulsive potential between oxygen atoms of the SPC potential. For a system of 65 water molecules a cavity radius of 10.45 Å is appropriate; this radius is altered to 12.00 Å for a cavity surrounding 113 molecules. The effect of the boundary is restricted to the outer-most water layer which is in contact with the dielectric continuum.     

Water transport through carbon nanotubes with defects

Non-equilibrium molecular dynamics simulations are performed to investigate how changing the number of structural defects in the wall of a (7,7) single-walled carbon nanotube (CNT) affects water transport and internal fluid dynamics. Structural defects are modelled as vacancy sites (missing carbon atoms). We find that, while fluid flow rates exceed continuum expectations, increasing numbers of defects lead to significant reductions in fluid velocity and mass flow rate. The inclusion of such defects causes a reduction in the water density inside the nanotubes and disrupts the nearly frictionless water transport commonly attributed to CNTs.