城市河道污水中好氧反硝化菌的分离鉴定与特性

采用富集培养和BTB(溴百里酚蓝)平板法从城市河道污水中筛选、分离获得了一株高效的好氧反硝化菌株ADZ1, 48 h内对硝酸盐的降解率为93.1%, 总氮的去除率为34.7%。16S rRNA测序及系统发育分析结果表明该菌株属于Pseudamonas sp., 经VITEK? 2系统鉴定为Pseudomonas putida。对该菌株的反硝化特性进行了研究, 结果表明, 该菌株以乙醇为最佳碳源, 在碳氮比达到12:1时, 对硝酸盐的去除率达到98%以上, 总氮去除率达到41.3%。该菌株对溶解氧、pH有着广泛的适应性, 菌体活力强, 有着良好的应用前景。     

Development of a molecular detection method for naphthalene degrading pseudomonads

Abstract: A combined polymerase chain reaction amplification and reverse dot blot assay was designed for the detection of bacterial genes from soil and sediments. Total nucleic acids were directly extracted from soil using a lysozyme/sodium dodecyl sulfate/freeze-thaw method followed by rapid purification through gel electrophoresis. DNA was amplified using a highly stringent polymerase chain reaction with primers directed against the nahR regulatory gene present in plasmid NAH7 of Pseudomonas putida G7. The resulting amplification product was detected colorimetrically by reverse dot blot with an improved sensitivity ten-fold greater than traditional ethidium bromide staining after gel electrophersis. A lower limit of 10³, P. putida G7 cfu (g soil)⁻¹ was detected. This method was successfully employed to detect indigenous naphthalene-degrading bacteria from subsurface sediment collected from different locations of a naphthalene-contaminated site. Similar approaches could be developed for other soil-borne genetic markers.     

Dehalogenation of 4 — Chlorobenzoic Acid by <Emphasis Type="Italic">Pseudomonas</Emphasis> isolates

Twenty three bacterial isolates either pure or consortium were initially screened on the basis of their ability to degrade as well as dechlorinate 4 — chlorobenzoic acid (4-CBA). Based on comparative growth response, three pure isolates Pseudomonas putida GVS-4, Pseudomonas aeruginosa GVS-18 and Pseudomonas aeruginosa GWS-19 and a consortium SW-2 was finally selected for further studies. The enzyme studies performed with cell free extracts revealed that dehalogenase activity was substrate specific with maximum activity at 300 μgml⁻¹ substrate concentration. Catechol 1,2 dioxygenase activity was found to be present in cell free extracts suggesting that 4 — chlorobenzoic acid (4-CBA) is catabolized by ortho-ring cleavage pathway. The dehalogenase enzyme profile showed single enzyme band in case of GVS-4 (Rm 0.76), GVS-18 (Rm 0.84), GWS −19 (Rm 0.85) and two bands in SW-2 (Rm 0.71 & 0.10).     

冷风干燥制备高活菌的恶臭假单胞菌菌粉

【目的】获得高活菌恶臭假单胞菌菌粉,提高菌体干燥及保藏存活率。【方法】选用冷风干燥法制备活菌粉,并优化吸附载体与保护剂。【结果】冷风干燥制备恶臭假单胞菌菌粉干燥存活率普遍达到65%以上,显著优于喷雾干燥(24%);对载体与保护剂进行正交试验优化,确定了载体为混合的硅藻土和碱处理玉米芯粉,混合比为1:2,保护剂(质量比)为甘露醇7%、谷氨酸钠5%、甘油1%,制得菌粉活菌数为1.03×1011 CFU/g,室温保藏30 d和4 °C保藏60 d存活率分别达到40.54%和71.67%。【结论】冷风干燥温度相对较低(10?40 °C),对菌体损伤小,碱处理玉米芯粉、甘露醇和谷氨酸钠是提高菌粉保藏存活率的重要因子,此法克服了革兰氏阴性菌菌粉不易制备和不耐保藏的瓶颈。     

Efficient production of D-glucosaminic acid from D-glucosamine by Pseudomonas putida GNA5

D-glucosaminic acid was produced efficiently from glucosamine by oxidative fermentation using a newly isolated strain, Pseudomonas putida GNA5. After optimization of the fermentation process, 51.5 g L(-1) D-glucosaminic acid was produced from an initial concentration of 60 g L(-1) D-glucosamine-HCl after 72 h of oxidative fermentation, which corresponded to a molar yield of 95.4%. This production process is potentially of considerable economic significance because very few by-products were detected. Furthermore, D-glucosaminic acid was accumulated stably during the oxidative fermentation process without the addition of an inhibitor of D-glucosaminic acid breakdown, even though D-glucosamine was exhausted. These results suggest that the mechanisms of D-glucosaminic acid-related metabolism differ between Pseudomonas putida GNA5 and the strain Pseudomonas genera, which was previously reported to produce D-glucosaminic acid.     

Production and characterization of a new bioemulsifier from Pseudomonas putida ML2

AIMS: To characterize the bioemulsifier produced by a nonfluorescent strain of Pseudomonas putida isolated from a polluted sediment and to determine the influence of pH, temperature, media composition, and carbon and nitrogen source on growth and emulsifying activity. METHODS AND RESULTS: Different indexes were employed to determine the emulsifying properties of culture supernatants of P. putida ML2 in defined and complex media. Surface tension of cell-free supernatants was measured. Purification and chemical analysis of the emulsifier was performed. Confirmed results indicate that a polysaccharide with hexasaccharide repeating units is responsible for the emulsifying activity in a mineral medium with glucose as sole carbon source. Moreover, an emulsifier is produced when growing on naphthalene. CONCLUSIONS: Culture media composition influences the amount and the properties of the emulsifier produced by this P. putida strain. Under nitrogen limiting conditions, a polysaccharide is responsible for the emulsifying activity in defined mineral media. In complex nitrogen rich medium, a different kind of emulsifier is produced. The exopolymer may contribute to hydrocarbons solubilization. SIGNIFICANCE AND IMPACT OF THE STUDY: This is the first exopolysaccharide with emulsifying properties produced by a Pseudomonas strain reported to the present. Also chemical composition is significantly different from previous reports. This strain has potential use in bioremediation and the purified polysaccharide may be used in food and cosmetic industry. Moreover, the production of the exopolymer may play a role on biofilm formation.     

Relation between cell disruption conditions, cell debris particle size, and inclusion body release

The efficiency of physical separation of inclusion bodies from cell debris is related to cell debris size and inclusion body release and both factors should be taken into account when designing a process. In this work, cell disruption by enzymatic treatment with lysozyme and cellulase, by homogenization, and by homogenization with ammonia pretreatment is discussed. These disruption methods are compared on the basis of inclusion body release, operating costs, and cell debris particle size. The latter was measured with cumulative sedimentation analysis in combination with membrane-associated protein quantification by SDS-PAGE and a spectrophotometric peptidoglycan quantification method. Comparison of the results obtained with these two cell debris quantification methods shows that enzymatic treatment yields cell debris particles with varying chemical composition, while this is not the case with the other disruption methods that were investigated. Furthermore, the experiments show that ammonia pretreatment with homogenization increases inclusion body release compared to homogenization without pretreatment and that this pretreatment may be used to control the cell debris size to some extent. The enzymatic disruption process gives a higher product release than homogenization with or without ammonia pretreatment at lower operating costs, but it also yields a much smaller cell debris size than the other disruption process. This is unfavorable for centrifugal inclusion body purification in this case, where cell debris is the component going to the sediment and the inclusion body is the floating component. Nevertheless, calculations show that centrifugal separation of inclusion bodies from the enzymatically treated cells gives a high inclusion body yield and purity.     

Transformations of codeine to important semisynthetic opiate derivatives by Pseudomonas putida m10

A biotransformation mixture which contained codeine and washed cells of Pseudomonas putida M10 gave rise to a number of transformation products that are of clinical importance which included hydrocodone, dihydrocodeine and 14beta-hydroxycodeine. Incubations with the same organism and codeinone gave rise to 14beta-hydroxycodeinone and 14beta-hydroxycodeine. Cell-free extracts and membrane fractions of P. putida M10 were shown to catalyse the 14beta-hydroxylation of codeinone. In addition, the potent analgesic oxycodone was shown to be produced from 14beta-hydroxycodeinone.