Encapsulation of proteins in biodegradable polymeric microparticles using electrospray in the Taylor cone-jet mode

Solvent extraction (or evaporation from a W(1)/O/W(2)-dispersion), coacervation, and spray drying methods are commonly employed to encapsulate protein drugs in polymeric microparticles for sustained delivery applications. To overcome the limitations of these methods, a novel electrospray method was developed to encapsulate a model protein drug-bovine serum albumin (BSA) in biodegradable polymeric microparticles and examine the feasibility of the process in not denaturing the protein. Microparticles of approximately 20 microm diameter with corrugated surfaces and smooth surfaces were observed by scanning electron microscope. Confocal laser scanning microscope images showed that BSA was distributed evenly in microparticles. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) was employed to investigate the protein integrity of BSA released from the polymer matrix after 38 days. No protein degradation was observed during the 38 days release. The secondary structure of released BSA was characterized by Fourier transform infrared (FTIR) and circular dichroism (CD), which suggested that the released BSA was almost identical to native BSA. The encapsulation efficiency could reach 76% by adjusting the amount of the additive Pluronic F127 and processing parameters. The release profile could be tailored by the fabrication process and the sustained release of BSA could endure for more than 1 month. More than 80% of the bioactivity of BSA (evaluated by BSA ELISA kit) could be maintained after releasing from polymer matrix. Findings of the present study demonstrate that this novel electrospray method is a promising approach to encapsulate bioactive materials such as proteins, enzymes, antibiotics, and DNA fragments in biodegradable polymeric particles.     

Gestational jet lag predisposes to later-life skeletal and cardiac disease

Circadian rhythm disturbance (CRD) increases the risk of disease, e.g. metabolic syndrome, cardiovascular disease, and cancer. In the present study, we investigated later life adverse health effects triggered by repeated jet lag during gestation. Pregnant mice were subjected to a regular light-dark cycle (CTRL) or to a repeated delay (DEL) or advance (ADV) jet lag protocol. Both DEL and ADV offspring showed reduced weight gain. ADV offspring had an increased circadian period, and an altered response to a jet lag was observed in both DEL and ADV offspring. Analysis of the bones of adult male ADV offspring revealed reduced cortical bone mass and strength. Strikingly, analysis of the heart identified structural abnormalities and impaired heart function. Finally, DNA methylation analysis revealed hypermethylation of miR17-92 cluster and differential methylation within circadian clock genes, which correlated with altered gene expression. We show that developmental CRD affects the circadian system and predisposes to non-communicable disease in adult life.     

我国北方稻区1991年稻飞虱大发生虫源形成

北方稻区在一般年份只有少量稻飞虱（褐飞虱Nilaparvata lugens,白背飞虱Sogatella fercifera)迁入,而与虫源区相隔千余公里的沿渤海湾稻区却在1991年稻飞虱暴发成灾,通过分析1991年各地稻飞虱主要迁入峰期的天气学背景和低空急流的时空分布及我国东部稻作区各地虫源的对应关系,表明大尺度低空急流的时空动态与南方（江岭区）大发生虫源的迁出期（区）相吻合的程度及维持时间乃北方稻虱大发生虫源得以形成的关键因子和暴发成灾的触发机制,其北上前缘左侧的暴雨区即远迁种群的集中降虫区,是否存在与南方大发生虫源时空同步且贯通南北的大尺度低空急流及其前缘的暴雨区可作为北方稻虱暴发的预警指标。     

我国低空急流的时空分布与稻飞虱北迁

利用国家气象局高空气象资料（CD版）统计了1986－1995年间昆虫迁飞季节内（3－9月份）低空急流发生的时空变化和抉学,并与稻飞虱的北迁作了相关分析。结果表明,低空急流的发生区域分布于百色,锦州,嫩江一线的东侧,长时间,大尺度的低空急流有利于稻飞虱的远距离北迁和大范围降落,3月下旬和5月下旬稻飞虱始见期的北界与低空急流的16．5℃等温线相吻合,而后其始见期北界与低空急流前缘所至基本吻合。据此提出可以低空急流作为监测稻飞虱迁飞的预警参数,再结合虫情资料预测稻飞慢迁入区的分布。     

Dynamic ejection behaviour of water molecules passing through a nano-aperture nozzle

This study used molecular dynamics (MD) simulation to investigate the passage of water molecules through a composite graphene/Au nano-nozzle. Our focus was on the degree to which system temperature, extrusion speed, and nozzle diameter affect jet dynamics and the associated transient phenomena. Our findings show that high pressure and spatial confinement cause the nanojet from a small nozzle diameter (1.0?nm) to bend and twist, whereas the jets from a nozzle with a diameter of 1.5?nm present columns of greater stability. At 100?K, the H₂O nanojet froze at the outlet of the nozzle in the form of condensed icicles. At 500?K, the H₂O nanojet formed a loose spray and gaseous clusters. High extrusion speed of 55.824?m/s produced recirculating flow downstream from the nanojet with the appearance of an erupting volcano, which further prompted the jet column to thicken. Lower extrusion speeds produced jets with flow velocity insufficient to overcome the capillary force at the outlet of the nozzle, which subsequently manifests as unstable fluctuations in the flow rate.

• HIGHLIGHTS

• Water molecules through a composite graphene/Au nano-nozzle forming a nanojet is investigated.

• High pressure and spatial confinement cause the nanojet from a small nozzle diameter (≤1.0?nm) to bend and twist.

• High extrusion speed (≧55.824?m/s) produced recirculating flow downstream from the nanojet.

• Figure abstract: Schematic of the H₂O nano-jet through a nano-nozzle of graphene/Au

     

Application of a Four-fluid Nozzle Spray Drier to Prepare Inhalable Rifampicin-containing Mannitol Microparticles

The purpose of this study was to use a four-fluid nozzle spray drier as a new one-step method for preparing rifampicin (RFP)-containing mannitol microparticles. A RFP-acetone/methanol (2:1) solution and aqueous solutions of mannitol (MAN) were simultaneously supplied through different liquid passages of a four-fluid nozzle spray drier and then dried to obtain MAN microparticles containing RFP. Using a cascade impactor, the in vitro aerosol performance of RFP powder and RFP-MAN microparticles with 1:5, 1:10, and 1:20 ratios was compared. The in vivo retention of RFP in the lungs of rats after intratracheal administration of 1:20 RFP-MAN microparticles was also compared. The RFP-MAN microparticles had better aerosol performance than RFP powder and delivery to the lung stages improved as the fraction of MAN was increased. For the 1:20 RFP-MAN microparticles, deposition in stages 2–7 was approximately 43%, which is sufficient for treatment. Approximately 8% of the RFP-MAN microparticles were deposited in stages 6–7, which corresponds to alveoli containing alveolar macrophages. The initial retention of RFP in the lung following pulmonary delivery of 1:20 RFP-MAN microparticles was higher than following oral or intravenous administration of RFP, but the elimination was rapid, resulting in the disappearance of RFP from the lung within 4 h. The plasma concentration–time profile of RFP after intratracheal administration of 1:20 RFP-MAN microparticles was consistent with the profile for RFP retention in the lung. Addition of cholesterol or phosphatidylcholine to RFP had little effect on its retention in the lung. The RFP-MAN microparticles were effective for delivery of RFP to the lung, but the RFP rapidly removed from the lung into the blood circulation. This study demonstrated that RFP-containing MAN microparticles prepared in one step using the four-fluid nozzle spray drier efficiently deliver RFP to the lung, although methods must be developed to prolong its retention and improve targeting to alveolar macrophages.     

Application of a water jet system to the pretreatment of cellulose

Plant cellulose is the most abundant organic compound on earth. Technologies for producing cellulose fiber or improving the enzymatic saccharification of cellulose hold the key to biomass applications. A technology for atomizing biomass without strong acid catalysis remains to be developed. The water jet is a well-known device used in machines (e.g., washing machines, cutters, and mills) that use high-pressure water. In this study, we examined whether a water jet system could be used to atomize crystalline cellulose, which comprises approximately 50% of plant biomass. The Star Burst System manufactured by Sugino Machine Limited (Sugino Machine; Toyama, Japan) is a unique atomization machine that uses a water jet to atomize materials and thereby places lower stress on the environment. After treatment with this system, the crystalline cellulose was converted into a gel-like form. High-angular annular dark-field scanning transmission electron microscopy showed that the cellulose fibers had been converted from a solid crystalline into a matrix of cellulose nanofibers. In addition, our results show that this system can improve the saccharification efficiency of cellulases by more than three-fold. Hence, the Star Burst System provides a new and mild pretreatment system for processing biomass materials.     

Measurement of fibroblast and bacterial detachment from biomaterials using jet impingement

Fibroblast and Staphylococcus aureus detachment strength from orthopaedic alloys and a tissue culture plastic (Thermanox) have been investigated with jet impingement. For S. aureus, unlike fibroblasts, detachment is caused more by pressure than shear. For these biomaterials, detachment strength is much higher for S. aureus than fibroblasts. Comparing materials under equivalent flow conditions, S. aureus attach to stainless steel and titanium with equal strength and more strongly than to Thermanox. For fibroblasts, detachment strength from all materials was similar. Fibroblast detachment strength from these biomaterials substantially decreases with time at equal flow rates and increases with flow rate at equal exposure times. Detachment strength is very similar for 3T3 and L929 fibroblasts on Thermanox for equivalent flow rate/time combinations, though enhanced adhesion of 3T3 cells was often noted for metals. Time effects are less evident for S. aureus. S. aureus adhesion to metals is more affected by flow rate than fibroblast adhesion.     

达标污水离岸排海末端处置技术研究综述

达标污水离岸排海处置具有低成本、高处理率等优点,是国内外沿海港口和临港工业园区进行污水处置的重要选择。介绍了国内外达标污水离岸排海末端处置技术的发展情况,分析了排污口位置选划、扩散器射流参数及水力结构优化等研究技术上存在的问题。认为排污口位置选划应在水动力、污染物扩散、泥沙冲淤及工程经济因素分析的基础上,还需要重点考虑污水排放对区域生态要素长期的影响;排海末端扩散器射流参数及水力结构优化也尤为关键,不仅直接影响稀释扩散效果,而且涉及到主管、上升管、喷口等多个可控因子,可以采用建立物理模型、数值模型及量纲分析等方法,合理优化扩散器的结构参数和扩散器的型式,对提高达标污水离岸处置的效果具有重要意义。     

N‐nitrosomelatonin enhances photic synchronization of mammalian circadian rhythms

Most physiological processes in mammals are synchronized to the daily light:dark cycle by a circadian clock located in the hypothalamic suprachiasmatic nucleus. Signal transduction of light‐induced phase advances of the clock is mediated through a neuronal nitric oxide synthase‐guanilyl cyclase pathway. We have employed a novel nitric oxide‐donor, N‐nitrosomelatonin, to enhance the photic synchronization of circadian rhythms in hamsters. The intraperitoneal administration of this drug before a sub‐saturating light pulse at circadian time 18 generated a twofold increase of locomotor rhythm phase‐advances, having no effect over saturating light pulses. This potentiation was also obtained even when inhibiting suprachiasmatic nitric oxide synthase activity. However, N‐nitrosomelatonin had no effect on light‐induced phase delays at circadian time 14. The photic‐enhancing effects were correlated with an increased suprachiasmatic immunoreactivity of FBJ murine osteosarcoma viral oncogene and period1. Moreover, in vivo nitric oxide release by N‐nitrosomelatonin was verified by measuring nitrate and nitrite levels in suprachiasmatic nuclei homogenates. The compound also accelerated resynchronization to an abrupt 6‐h advance in the light:dark cycle (but not resynchronization to a 6‐h delay). Here, we demonstrate the chronobiotic properties of N‐nitrosomelatonin, emphasizing the importance of nitric oxide‐mediated transduction for circadian phase advances.