TURNING MANEUVERS IN STELLER SEA LIONS (EUMATOPIAS JUBATUS)

Steller sea lions are highly maneuverable marine mammals (expressed as minimum turning radius). Video recordings of turns ( n = 195) are analyzed from kinematic measurements for three captive animals. Speed-time plots of 180° turns have a typical "V-shape." The sea lions decelerated during the first half of the turn, reached a minimum speed in the middle of the curved trajectory and reaccelerated by adduction of the pectoral flippers. The initial deceleration was greater than that for passive gliding due to pectoral flipper braking and/or change in body contour from a stiff, straight streamlined form. Centripetal force and thrust were determined from the body acceleration. Most thrust was produced during the power phase of the pectoral flipper stroke cycle. Contrary to previous findings on otariids, little or no thrust was generated during initial abduction of the pectoral flippers and during the final drag-based paddling phase of the stroke cycle. Peak thrust force at the center of gravity occurs halfway through the power phase and the centripetal force is maximal at the beginning of the power stroke. Performance is modulated by changes in the duration and intensity of movements without changing their sequence. Turning radius, maximum velocity, maximum acceleration and turning duration were 0.3 body lengths, 3.5 m/s, 5 m/s², and 1.6 s, respectively. The relative maneuverability based on velocity and length specific minimum turning radius is comparable to other otariids, superior to cetaceans but inferior to many fish.     

Kinematics of bipedalism in Propithecus verreauxi

Bipedalism is rare in primates and has evolved in two distantly related groups: hominoids and indrids. Although copious data are available on the mechanics of bipedal locomotion in hominoids and vertical clinging and leaping (VCL) in indrids, no research has addressed the unique mode of bipedal locomotion exhibited by select indrid primates. Propithecus verreauxi is a highly specialized indrid vertical clinger and leaper that uses a peculiar form of bipedalism on the ground. The objectives of this study were to describe the bipedal gait of Propithecus , to assess the influence of VCL specializations on the kinematic patterns and propulsion mechanisms used by Propithecus during bipedalism, and to compare Propithecus bipedalism with the bipedal gaits of other primates capable of using bipedalism. Video was collected of five adult P. verreauxi moving bipedally in a seminatural setting at the Duke University Primate Center. Duty factor, footfall patterns, joint angles and center of mass movement were quantified in the sagittal plane for 73 steps. Propithecus uses a bipedal gallop, a gait unique to Propithecus . The kinematic similarities (e.g. large hip and knee angular excursions and preparatory countermovements) between bipedal galloping and VCL lead us to suggest that Propithecus takes advantage of specializations for VCL to conserve energy during bipedal galloping. Propithecus also walks bipedally at slower speeds. When Propithecus walks, it utilizes a relatively compliant gait similar to that of other primate facultative bipeds ( Pan , Hylobates ). During bipedal walking, energy conservation may be sacrificed for increased balance and reduced joint loads.     

The evolution of larval morphology and swimming performance in ascidians

The complexity of organismal function challenges our ability to understand the evolution of animal locomotion. To meet this challenge, we used a combination of biomechanics, phylogenetic comparative analyses, and theoretical morphology to examine evolutionary changes in body shape and how those changes affected swimming performance in ascidian larvae. Results of phylogenetic comparative analyses suggest that coloniality evolved at least three times among ascidians and that colonial species have a convergent larval morphology characterized by a large trunk volume and shorter tail length in proportion to the trunk. To explore the functional significance of this evolutionary change, we first verified the accuracy of a mathematical model of swimming biomechanics in a solitary (C. intestinalis) and a colonial (D. occidentalis) species and then ran numerous simulations of the model that varied in tail length and trunk volume. The results of these simulations were used to construct landscapes of speed and cost of transport predictions within a trunk volume/tail length morphospace. Our results suggest that the reduction of proportionate tail length in colonial species resulted in improved energetic economy of swimming. The increase in the size of larvae with the origin of coloniality facilitated faster swimming with negligible energetic cost, but may have required a reduction in adult fecundity. Therefore, the evolution of ascidians appears to be influenced by a trade-off between the fecundity of the adult stage and the swimming performance of larvae.     

Future directions for the analysis of musculoskeletal design and locomotor performance

New techniques and conceptual frameworks offer new challenges and exciting opportunities for research on the biomechanics and physiology of vertebrate musculoskeletal design and locomotor performance. Past research based on electromyography and two-dimensional kinematics has greatly advanced the field of vertebrate functional morphology. Studies using these approaches have revealed much about vertebrate structure and function and have emphasized the importance of incorporating historical and developmental constraint and ecological context. Continued use of these experimental tools, but with greater emphasis on three-dimensional analysis of body movement, in combination with 3D kinetics and flow visualization of fluid movement past moving organisms, can now take advantage of the considerable advances in computing power and digital video technology. Indeed, surprisingly few detailed 3D analyses of movement for many locomotor modes and differing organisms are presently available. A challenge of 3D analyses will be to reduce the complexity of the data obtained in order to identify general principles of movement and biomechanics. New techniques and approaches for measuring muscle forces and length changes, together with activation patterns and movement, under dynamic conditions of more varied motor behavior are now also available. These provide the opportunity to study the mechanics and physiology of muscle function at greater depth and under more realistic conditions than has been previously possible. The importance of studying intact, behaving organisms under a broader range of locomotor conditions (other than steady state) and in the context of their natural environment remains a critical need for vertebrate biologists. This provides the much-needed opportunity for placing advances at more cellular and molecular levels into the context of whole organism function. Hence, studies at the organismal level remain paramount.     

The novel ‘tongue‐bite apparatus’ in the knifefish family Notopteridae (Teleostei: Osteoglossomorpha): are kinematic patterns conserved within a clade?

Osteoglossomorph fishes are unique in possessing a specialized feeding mechanism, the tongue-bite apparatus (TBA) involving the hyoid apparatus. The TBA is associated with two unique behaviour patterns - raking and open-mouth chewing - used to disable and macerate prey. The kinematics of these two behaviours was compared in two species of knifefishes (family Notopteridae): Xenomystus nigri (Gunther, 1868) and Chitala ornata (Gray, 1831) using high-speed video (250 frames s"¹). Both univariate and multivariate analyses indicated that there were significant interspecific differences in both raking and open-mouth chewing. Raking can be divided into three stages; the preparatory phase, power stroke, and recovery phase. During the power stroke posterior motion of the pectoral girdle and neurocranial elevation both appear to play a major role in prey reduction. In Xenomystus the power stroke involves significantly greater levels of neurocranial elevation (35^o) and pectoral girdle motion (38% of head length; 9.5^o) than that found in Chitala (neurocranial elevation 11^o; pectoral girdle motion 11% of head length and 5^o). Indeed, Xenomystus represents the most extreme raking behaviour of any osteoglossomorph thus far studied. Temporal displacement variables demonstrated that the power stroke in Xenomystus is significantly faster than in Chitala. Although some of the interspecific differences might be size related, these data suggest that a greater degree of difference exists in these highly specialized behaviours than previous work has demonstrated. These findings support the notion that biomechanical duplication (an additional ligament found in osteoglossomorphs) could be linked to increased functional versatility.     

Crouched posture and high fulcrum, a principle in the locomotion of small mammals: The example of the rock hyrax (Procavia capensis) (Mammalia: Hyracoidea)

The cineradiographic study of the locomotion of the rock hyrax (Procavia capensis) and the functional interpretation of its locomotory system, reveals that the main action of proximal segments is combined with flexed position and low movements of limb joints. This observation can be applied to the locomotion of other small mammals. In the forelimb, scapular rotation and translation account for more than 60% of step length. Effective shoulder joint movements are mostly restricted to less than 20°, and elbow movements range mainly between 20°-50°. The detachment of the shoulder girdle of therian mammals from the axial skeleton, and development of a supraspinous fossa, are correlated with movements at a high scapular fulcrum. Movements at such a high fulcrum are in interdependency with a crouched posture. Only flexed limbs can act as shock absorbers and prevent vertical changes in the center of gravity. Basic differences in forelimb movements exist between larger primates (humeral retraction) and smaller mammals (scapula retraction). In the hyrax, propulsion is due mainly to hip joint movements in symmetrical gaits, but sagittal lumbar spine movements play the dominant role at in-phase gaits. Joint and muscular anatomy, especially of the shoulder region, are discussed in view of the kinematic data.     

Comparative assessment of knee joint models used in multi-body kinematics optimisation for soft tissue artefact compensation

Estimating joint kinematics from skin-marker trajectories recorded using stereophotogrammetry is complicated by soft tissue artefact (STA), an inexorable source of error. One solution is to use a bone pose estimator based on multi-body kinematics optimisation (MKO) embedding joint constraints to compensate for STA. However, there is some debate over the effectiveness of this method. The present study aimed to quantitatively assess the degree of agreement between reference (i.e., artefact-free) knee joint kinematics and the same kinematics estimated using MKO embedding six different knee joint models. The following motor tasks were assessed: level walking, hopping, cutting, running, sit-to-stand, and step-up. Reference knee kinematics was taken from pin-marker or biplane fluoroscopic data acquired concurrently with skin-marker data, made available by the respective authors. For each motor task, Bland-Altman analysis revealed that the performance of MKO varied according to the joint model used, with a wide discrepancy in results across degrees of freedom (DoFs), models and motor tasks (with a bias between −10.2° and 13.2° and between −10.2 mm and 7.2 mm, and with a confidence interval up to ±14.8° and ±11.1 mm, for rotation and displacement, respectively). It can be concluded that, while MKO might occasionally improve kinematics estimation, as implemented to date it does not represent a reliable solution to the STA issue.     

Men and women adopt similar walking mechanics and muscle activation patterns during load carriage

Although numerous studies have investigated the effects of load carriage on gait mechanics, most have been conducted on active military men. It remains unknown whether men and women adapt differently to carrying load. The purpose of this study was to compare the effects of load carriage on gait mechanics, muscle activation patterns, and metabolic cost between men and women walking at their preferred, unloaded walking speed. We measured whole body motion, ground reaction forces, muscle activity, and metabolic cost from 17 men and 12 women. Subjects completed four walking trials on an instrumented treadmill, each five minutes in duration, while carrying no load or an additional 10%, 20%, or 30% of body weight. Women were shorter (p<0.01), had lower body mass (p=0.01), and had lower fat-free mass (p=0.02) compared to men. No significant differences between men and women were observed for any measured gait parameter or muscle activation pattern. As load increased, so did net metabolic cost, the duration of stance phase, peak stance phase hip, knee, and ankle flexion angles, and all peak joint extension moments. The increase in the peak vertical ground reaction force was less than the carried load (e.g. ground force increased approximately 6% with each 10% increase in load). Integrated muscle activity of the soleus, medial gastrocnemius, lateral hamstrings, vastus medialis, vastus lateralis, and rectus femoris increased with load. We conclude that, despite differences in anthropometry, men and women adopt similar gait adaptations when carrying load, adjusted as a percentage of body weight.     

Correlates between kinematics and baropodometric measurements for an integrated in-vivo assessment of the segmental foot function in gait

Baropodometry and multi-segmental foot kinematics are frequently employed to obtain insight into the mechanics of the foot-ground interaction in both basic research and clinical settings. However, nothing hitherto has been reported on the full integration of kinematics with baropodometric parameters, and only a few studies have addressed the association between intersegmental kinematics and plantar loading within specific foot regions. The aim of this study was to understanding the relationships between foot joint mobility and plantar loading by focusing on the correlation between these two measures.     

Measurement of Dynamic Scapular Kinematics Using an Acromion Marker Cluster to Minimize Skin Movement Artifact

The measurement of dynamic scapular kinematics is complex due to the sliding nature of the scapula beneath the skin surface. The aim of the study was to clearly describe the acromion marker cluster (AMC) method of determining scapular kinematics when using a passive marker motion capture system, with consideration for the sources of error which could affect the validity and reliability of measurements. The AMC method involves placing a cluster of markers over the posterior acromion, and through calibration of anatomical landmarks with respect to the marker cluster it is possible to obtain valid measurements of scapular kinematics. The reliability of the method was examined between two days in a group of 15 healthy individuals (aged 19-38 years, eight males) as they performed arm elevation, to 120°, and lowering in the frontal, scapular and sagittal planes. Results showed that between-day reliability was good for upward scapular rotation (Coefficient of Multiple Correlation; CMC = 0.92) and posterior tilt (CMC = 0.70) but fair for internal rotation (CMC = 0.53) during the arm elevation phase. The waveform error was lower for upward rotation (2.7° to 4.4°) and posterior tilt (1.3° to 2.8°), compared to internal rotation (5.4° to 7.3°). The reliability during the lowering phase was comparable to results observed during the elevation phase. If the protocol outlined in this study is adhered to, the AMC provides a reliable measurement of upward rotation and posterior tilt during the elevation and lowering phases of arm movement.