Induction of porphobilinogen oxygenase and porphobilinogen deaminase in rat blood under conditions of erythropoietic stress

Porphobilinogen is the substrate of two enzymes: porphobilinogen deaminase and porphobilinogen-oxygenase. The first one transforms it into the metabolic precursors of heme and the second diverts it from this metabolic pathway by oxidizing porphobilinogen to 5-oxopyrrolinones. Rat blood is devoid of porphobilinogen-oxygenase under normal conditions while it carries porphobilinogen-deaminase activity. When the rats were submitted to hypoxia (p_O2 = 0.42 atm) for 18 days, the activity of porphobilinogen-oxygenase appeared at the tenth day of hypoxia and reached the maximum at the 14–16th day. It decreased to a half after 2 days (half-life of the enzyme) and disappeared after 4 days of return to normal oxygen pressure. Porphobilinogen-deaminase activity increased after the first day of hypoxia, reached a maximum at the 14–16th day and did not decrease to normal values until the 15th day after return to normal oxygen pressure. The activities of both prophobilinogen-oxygenase and porphobilinogen-deaminase were induced by administration of erythropoietin. When rats were made anaemic with phenylhydrazine, porphobilinogen-oxygenase activity also appeared in the blood cells. Although the reticulocyte concentration was higher when compared to that obtained under hypoxia, the activities of the oxygenase obtained under both conditions were comparable. Porphobilinogen-deaminase activity was always closely related to the reticulocyte content. The appearance of porphobilinogen-oxygenase under the described erythropoietic conditions was due to a de novo induction of the enzyme, as shown by its inhibition with actinomycin D and cycloheximide. Porphobilinogen-oxygenase as well as porphobilinogen-deaminase were present in the rat bone marrow under normal conditions. Their activities increased in phenylhydrazine treated rats. The properties and kinetics of porphobilinogen-oxygenase from the rat blood and bone marrow were determined and found to differ in several aspects.     

Enzymatic O-glycosylation of kappa-caseinomacropeptide by ovine mammary Golgi membranes

The results of subcellular fractionation of sheep mammary gland membranes indicate that N-acetylgalactosaminyl polypeptide transferase and galactosyl-N-acetylgalactosaminyl transferase, which are involved in the assembly of disaccharide units of kappa-casein, are localized chiefly in Golgi membranes. The glycosyltransferase activities incorporating N-acetyl [1-14C] galactosamine and [U-14C] galactose from uridine diphosphate N-acetyl [1-14C] galactosamine and uridine diphosphate [U-14C] galactose, respectively, were measured after membrane solubilization with Triton X-100 either with unglycosylated caseinomacropeptide, or with this polypeptide containing the N-acetylgalactosamine side chain residues (desialylated and degalactosylated caseinomacropeptide). Radioactive N-acetylgalactosamine was incorporated in the unglycosylated acceptor peptide, and the glycosidic bonds in the product were alkali labile, suggesting that they were linked to the hydroxyamino acid residues. In addition radioactive N-acetylgalactosamine was released after alpha N-acetyl-D-galactosaminidase treatment of labelled caseinomacropeptide. [U-14C] galactose was incorporated in the desialylated and degalactosylated acceptor peptide. Reductive alkaline treatment of [U-14C] galactose peptide resulted in the release of a major product, the chromatographic properties of which in TLC were identical with authentic galactosyl (1 leads to 3) N-acetylgalactosaminitol. The structure of the labelled disacchariditol determined after periodate oxidation (two equivalents) by gas liquid chromatography-mass spectrometry revealed that the [U-14C] galactose was linked to position C-3 on the N-acetylgalactosaminyl-residue. The anomery of the galactose, as determined by a chemical method, indicates unambiguously a beta configuration.     

Uncoupling of mitochondrial oxidative phosphorylation by thallium.

The mechanism of integration of λ$\text{bio}$ll, which is deleted of all the known λ recombination genes, was studied using $\text{bio}$ deleted hosts as recipients. The presence of $\text{rec}$BC DNase and $\text{exo}$I in the recipient cells affected the fate of λ$\text{bio}$ll DNA. In nine of ten $\text{imm}\text{λ}{}^{\mathrm{+}}$ transductants, insertion of the λ$\text{bio}$ll genome took place somewhere between J and N and the remaining one had abnormally permuted prophage λ. In this lysogen (#42), the sequence of prophage genes was similar to that of vegetative phage λ. The properties of lysogen #42 were compared with those of other lysogens.     

Fluorescence anisotropy from diphenylhexatriene in rat liver plasma membranes

Rat livers were fractionated to obtain intracellular membrane preparations and a highly purified preparation of bile canaliculi. The fraction containing bile canaliculi was homogenized and subfractionated to give fractions representing fragments of contiguous membrane and of canalicular microvilli. The relative purity and extent of contamination of each preparation was determined. When the fluorescent probe 1,6-diphenyl-1,3,5-hexatriene was incorporated into aliquots of each fraction at the same probe: lipid ratio and the steady-state anisotropy of its fluorescence measured, it was found that the plasma membrane preparations were much more ordered than the intracellular membrane preparations. Of the plasma membrane preparations, that containing the canalicular microvilli was the most ordered, even allowing for any contribution of contaminants. Thus the microvillus membrane of the bile canaliculus appears to be the most ordered domain of the plasma membrane of the hepatocyte. The high order in this domain may be a factor in reducing the susceptibility to bile salt damage during bile secretion, since it is this region which is exposed to high concentrations of bile salts in vivo.     

Cellulose-microfibril-orienting mechanisms in plant cells walls

A brief review is given of the changing views over the years, as knowledge of wall structure has developed, concerning the mechanism whereby cellulose chains may be oriented. This leads to an examination of current concepts, particularly those concerning microtubules. It is shown that none of the mechanisms suggested whereby microtubules might cause orientation of cellulose microfibrils is consistent with the known range of molecular architectures found in plant cell walls. It is further concluded that any mechanism which necessitates an indissoluble link between the plasmalemma and the cellulose-synthesising complex at the tip of a microfibril is unacceptable. A new proposal is presented in which it is speculated that both microtubules and microfibrils are oriented by a mechanism separate from both. It is shown that if two vectors are contemplated, one parallel to cell length and one at right angles, and a sensor exists on the plasmalemma surface which responds to changes in the vectors, then all known wall structures may be explained. The possible nature of the vectors and the sensor are considered.     

Restriction fragment length polymorphism (RFLP) analysis of bovine nuclear protein genes

Summary We have recently cloned both the bovine protamine (Krawetz et al. 1987, DNA 6: 47–57) and high mobility group (HMG-1) cDNAs (Pentecost and Dixon 1984, Bioscience Reports 4: 49–57). They have been used as probes for Restriction Fragment Length Polymorphism analysis of male-female pairs of different species and breeds, within the genus Bos. Utilizing this approach we have studied inheritance, chromosomal location and gene copy number of the bovine protamine and HMG-1 genes. This revealed that these nuclear protein genes are highly conserved suggesting that selective pressure has maintained their gene structures during evolution. A polymorphic Taq 1 restriction fragment was identified that was shown to be a heritable marker. These genes are not sex-linked and are present in a single copy for protamine and at least two copies for the HMG-1.     

Decision Support through Mass and Energy Flow Management in the Vehicle-Refinishing Sector

In the past few decades, major advances in environmental protection within the coating application industry have been made. In spite of this technological progress, approximately 50% of industrial-solvent emissions still come from the paint-application sector. The advances made in reducing emissions for plants requiring licensing have unfortunately had no influence on the environmental efforts of smaller companies. Solvent-reduced painting systems, such as high-solid paints, water-based coating, and powder coating have not been able to achieve acceptance, nor have innovative application technologies. The principal arguments against a conversion to these ecologically more favorable alternatives were related to cost and quality.
Recently, the EU Solvent Directive (1999/13/EC) went into effect, aiming to significantly reduce industrial-solvent emissions. Up until this point, however, instruments enabling smaller companies to determine their solvent emissions and to simultaneously develop process-improvement potentials while keeping costs in mind have been missing.
Using the mass and energy flow-management approach, cost structures and environmental benefits can be made transparent to the entrepreneur. The primary result of the research projects presented here is the computer-based mass and energy flow model called the individual computer-aided mass and energy flow model for the vehicle-refinishing sector (IMPROVE). It can be used as a detailed business-consultancy tool. Based upon this, practical guidelines were developed for easy orientation and activity planning. They can be used by companies to help them fulfill the requirements of environmental legislation and to display the benefits that can be achieved by various emission-reduction measures.