Differential extraction of sediment phosphates with NTA solutions

An extraction technique is described for the separation of iron- and calcium-bound phosphate. The iron-bound phosphate is extracted with a 0.05 M solution of Ca-NTA under reducing conditions. Iron, also, is brought into solution, which is an advantage over the NaOH extraction. The calcium-bound phosphate is extracted with a 0.05 M solution of Na-NTA. The NTA also extracts humic compounds. Organic phosphate compounds can be measured in the NTA extracts, unlike the NaOH or H₂SO₄ extracts such as are used in the (modified) Jackson procedure.Examples of some test compound extractions and of a calcareous sediment are given.     

Seasonal variation in ribulose bisphosphate carboxylase activity in Pinus silvestris

Ribulose bisphosphate carboxylase activity was examined in Pinus silvestris L. during successive seasons. The enzyme activities were studied both in seedlings, kept under controlled conditions in a climate chamber, and in needles from a 15-year-old tree in a natural stand. The enzyme activities were analysed in cell-free extracts prepared with Tween 80 as protective agent. The carboxylase activity fluctuated periodically both in the seedlings and in the natural stand. In the seedlings, the weight-related activity in the older needles increased 50–100% (in the cotyledons c. 200%) in the beginning of the “summer”. It decreased as the new shoot developed. The specific activity increased c. 100%. With chlorophyll as base, the activity usually decreased during “summer”. In the developing current needles the carboxylase activity increased when expressed on a weight or on a protein basis. The decrease in weight-related carboxylase activity in the older needles was preceded by, or simultaneous with, loss of total protein. It is suggested that protein, including the carboxylase, is utilized as nitrogen reserve for the new shoot. During hardening by combined photoperiod and thermoperiod, the carboxylase activity decreased when expressed relative to dry weight and protein. Calculated on a chlorophyll basis, the activity was rather constant. In the natural stand the activity in the one- and two-year-old needles increased during spring and summer and decreased during autumn and winter. Even at severe winter stress substantial carboxylase activity remained in the needles. The activity of the enzyme in vivo is discussed with respect to electron transport and net photosynthesis.     

The estimation of micro-algal protein content and its meaning to the evaluation of algal biomass I. Comparison of methods for extracting protein

The spectrophotometric evaluation of micro-algal protein needs a prior extraction from cells in order to liberate protein for measurement. The conditions of extraction (temperature, duration, normality of sodium hydroxide, pretreatment) which yield optimal protein content are tested with three algal cultures (Scenedesmus, Synechococcus, Asterionella). A standard method of extraction is presented. Comparison of this method with nine published methods reveals markedly lower protein yields for easy extractable (43–100%) and hard extractable (5–75%) algal species, relative to this method, depending on ease of cell wall breakage. The application of this standard method to field investigations is demonstrated and compared to other biochemical parameters. The advantages of this method over other protein extraction methods, with respect to field material, are discussed.     

Effects of lignin content on the properties of lignocellulose-based biocomposites

The paper is focused on the analysis of the behaviour of biocomposites (biodegradable composites) which are reinforced with different fillers fractions, with varying lignin contents. These materials have been carried-out by extrusion and injection moulding. The matrix, an aromatic copolyester (polybutylene adipate-co-terephthalate), is biodegradable. The lignocellulose fillers are a by-product of an industrial fractionation process of wheat straw. From the raw agro-material and by lignin extractions, various fillers fractions have been obtained by varying the fractionation conditions, both on the liquid media (aqueous or organic) and on the temperature. The fillers lignin contents vary from 30 to 14 wt% with a resultant increase of the cellulose content. We have analysed the impact of the different extraction conditions on the fillers surface and size distribution, and also on the final thermal and mechanical properties of the biocomposites. These materials present significant differences of behaviour which can fulfil some requirements for applications, such as non-food packaging or other short-lived applications (agriculture, sport …) where long-lasting polymers are not entirely adequate.     

Pitfalls in the sample preparation and analysis of N-acylethanolamines

N-acylethanolamines (NAEs) are a group of lipid mediators synthesized in response to a number of physiological and pathological stimuli. Because of the low tissue concentrations of NAEs, analyses often include liquid extraction followed by solid-phase extraction and subsequent quantitation by LC/MS or GC/MS. Reported levels of NAEs vary considerably, however, and often no explanation is given for these discrepancies. Brought on by difficulties encountered during method development, the effects of using four different brands of silica-containing solid phase extraction (SPE) columns and five different brands of chloroform for sample preparation were investigated. Considerable variation in the retention and recoveries of seven NAEs and 2-arachidonoylglycerol existed between the SPE columns. Furthermore, it was found that some chloroforms contained quantifiable amounts of N-palmitoylethanolamine and N-stearoylethanolamine. Finally, it was found that use of one of the chloroforms resulted in a loss of N-oleoylethanolamine from solution due to addition of chlorine to the ω-9 bond. The identity of this reaction product was confirmed by LC-MS/MS and NMR. It is recommended that these aspects of sample preparation and analysis should be thoroughly validated during method development and the relevant information on specific brands used be reported in future communications in order to better estimate the validity of reported quantitative data.     

Human Health Risk Assessment of Soils Contaminated with Metal(loid)s by Using DGT Uptake: A Case Study of a Former Korean Metal Refinery Site

The human health risk of soils contaminated with As, Pb, Cu, and Zn was evaluated based on pseudo-total concentrations of metal(loid)s, the physiologically based extraction test (PBET), and diffusive gradients in thin films (DGT). Non-carcinogenic (NCR) and carcinogenic (CR) risks exceeded the U.S. Environmental Protection Agency criteria under both the residential and non-residential scenarios. Human bioavailable concentrations (PBET) were much lower than pseudo-total concentrations. The Hazardous Index of NCR (HI (NCR)) for the PBET in the studied soils was 67% and 94% less than that for pseudo-total concentration, respectively, under the non-residential and residential scenarios. Similarly, CR for the PBET was also 65% and 93% less for the two soils. The concentration of metal(loid)s accumulated in the DGT resin was highly correlated with the PBET-extractable concentration (R² > 0.649). Therefore, for both the CR and HI (NCR), the DGT-calculated risk was linearly related to the PBET-calculated risk for the studied soils under both scenarios. The results suggest that DGT uptake and PBET-extracted concentrations are good surrogates for risk estimation and that both J1 and J2 soils require remediation before their use for residential or non-residential purposes.     

Extraction and fractionation of complex lipid mixtures with dense carbon dioxide on a micro scale

The effects of pressure, temperature and some organic solvents on the recovery of various lipid classes from plant and animal tissues can be assessed by fractional extraction with dense carbon dioxide and consecutive analysis by thin-layer chromatography.     

Phallus impudicus loaded with γ-Fe2O3 as solid phase bioextractor for the preconcentrations of Zn(II) and Cr(III) from water and food samples

We investigated the application of fungus Phallus impudicus loaded γ-Fe₂O₃ nanoparticles as a biosorbent for magnetic solid phase extractions of trace levels of Zn(II) and Cr(III) ions from natural samples before their measurements by inductively coupled plasma optical emission spectrometry. The characterization of magnetized P. impudicus was performed using the scanning electron microscope, the energy dispersive X-ray and Fourier transform infrared spectroscopy. Important experimental factors were investigated. The experimental results fitted well to the Langmuir adsorption model and pseudo-second order kinetic model. Limit of detections of targeted ions by magnetic solid phase extraction method based on use of P. impudicus were found as 10.5 ngL⁻¹ and 12.6 ngL⁻¹ respectively for Cr(III) and Zn(II). The sorption capacities of the biosorbent were 22.8 mgg⁻¹ for Cr(III) and 25.6 mgg⁻¹ for Zn(II). The preconcentration factors were achieved as 100 for both of ions. RSDs for inter- and intraday precisions were found as lower than 2.0% and 2.1% respectively for both of targeted ions. The accuracy of the recommended process was tested by recovery measurements on the certificated reference materials and successfully applied for quantification recoveries of Cr(III) and Zn(II) ions from water and food samples.     

The Rise of Textured Perovskite Morphology: Revolutionizing the Pathway toward High‐Performance Optoelectronic Devices

Halide perovskite materials have achieved overwhelming success in various optoelectronic applications, especially perovskite solar cells and perovskite‐based light‐emitting diodes (P‐LEDs), owing to their outstanding optical and electric properties. It is widely believed that flat and mirror‐like perovskite films are imperative for achieving high device performance, while the potential of other perovskite morphologies, such as the emerging textured perovskite, is overlooked, which leaves plenty of room for further breakthroughs. Compared to flat and mirror‐like perovskites, textured perovskites with unique structures, e.g., coral‐like, maze‐like, column‐like or quasi‐core@shell assemblies, are more efficient at light harvesting and charge extraction, thus revolutionizing the pathways toward ultrahigh performance in perovskite‐based optoelectronic devices. Employing a textured perovskite morphology, the record of external quantum efficiency for P‐LEDs is demonstrated as 21.6%. In this research news, recent progress in the utilization of textured perovskite is summarized, with the emphasis on the preparation strategies and prominent optoelectronic properties. The impact of the textured morphology on light harvesting, carrier dynamic management, and device performance is highlighted. Finally, the challenges and great potential of employing these innovative morphologies in fabricating more efficient optoelectronic devices, or creating a new energy harvesting and conversion regime are also provided.     

Unifying Charge Generation,Recombination, and Extraction in Low‐Offset Non‐Fullerene Acceptor Organic Solar Cells

Even though significant breakthroughs with over 18% power conversion efficiencies (PCEs) in polymer:non‐fullerene acceptor (NFA) bulk heterojunction organic solar cells (OSCs) have been achieved, not many studies have focused on acquiring a comprehensive understanding of the underlying mechanisms governing these systems. This is because it can be challenging to delineate device photophysics in polymer:NFA blends comprehensively, and even more complicated to trace the origins of the differences in device photophysics to the subtle differences in energetics and morphology. Here, a systematic study of a series of polymer:NFA blends is conducted to unify and correlate the cumulative effects of i) voltage losses, ii) charge generation efficiencies, iii) non‐geminate recombination and extraction dynamics, and iv) nuanced morphological differences with device performances. Most importantly, a deconvolution of the major loss processes in polymer:NFA blends and their connections to the complex BHJ morphology and energetics are established. An extension to advanced morphological techniques, such as solid‐state NMR (for atomic level insights on the local ordering and donor:acceptor π? π interactions) and resonant soft X‐ray scattering (for donor and acceptor interfacial area and domain spacings), provide detailed insights on how efficient charge generation, transport, and extraction processes can outweigh increased voltage losses to yield high PCEs.