Structural and functional domains of cellobiohydrolase I from trichoderma reesei

Limited proteolysis (papain) of the cellobiohydrolase I (CBH I, 65 kDa) from Trichoderma reesei led to the seperation of two functional domains: a core protein (55 kDa) containing the active site, and a C-terminal glycopeptide (10 kDa) implicated in binding to the insoluble matrix (cellulose). The quaternary structures of the intact CBH I and its core in solution are now compared by small angle X-ray scattering (SAXS) measurements. The molecular parameters derived for the core (Rg=2.09 nm, D_max=6.5 nm) and for the intact enzyme (Rg=4.27 nm, D_max=18 nm) indicate very different shapes. The resulting models show a tadpole-like structure for the intact enzyme where the isotropic part coincides with the core protein and the flexible tail part should be identified with the C-terminal glycopeptide. Thus in this enzyme, functional differentiation is reflected in structural peculiarities.Abbreviations SAXS small angle X-ray scattering - SDS-PAGE SDS-polyacrylamide gel electrophoresis - IEF-PAG polyacrylamide gel isoelectric focusing; cellobiohydrolase (CBH, 1,4--glucan cellobio hydrolase (E.C.3.2.1.91)) - D_max maximum diameter - Rg radius of gyration     

Synchrotron-excited time-resolved fluorescence spectroscopy of adenosine,protonated adenosine and 6N, 6N-dimethyladenosine in aqueous solution at room temperature

The fluorescence behavior of adenosine in neutral solution has been studied by time-resolved spectroscopy using synchrotron excitation and timecorrelated single photon counting, and by decay time measurements. Three emissions have been identified and correlated with three excitation spectra. The assignment of these transitions has been made by comparison with similar measurements on ⁶N, ⁶N-dimethyladenosine (6 DMA), and on adenosine in acid solution (ADO H⁺). It is proposed that two of the transitions of adenosine which correlate with 6DMA originate from coplanar and orthogonal rotational conformers of the amino group. The other transition, correlating with ADO H⁺ may originate either from the ³H-imino tautomer, or from a differently solvated rotational conformer.A partial presentation of this work has been made at the Second Congress of the European Society for Photobiology Padova, Italy, 6–10 September 1987     

Use of Brassica callus culture to induce sporulation in Alternaria brassicae (Berk.) Sacc.

A non-sporulating isolate of Alternaria brassicae, inoculated on callus culture of Brassica juncea cv. Kranti, colonized the callus and produced spores. When captafol, a fungicide, was added (100 mg/l) to the callus culture medium, if effectively checked fungal contamination and saprophytic growth of A. brassicae on culture medium, without adversely affecting callus growth or establishment of dual culture.     

A model for gramicidin A′-phospholipid interactions in bilayers

A model is proposed for the effect of gramicidin A on the order and structure of phospholipid dispersions. According to this model, the addition of gramicidin A influences the surrounding lipids via two independent mechanisms. The first arises from a drop in surface pressure for those lipids substantially bounded by gramicidin A. The second mechanism arises from the increase in the phospholipid headgroup spacing due to the small polar region of the polypeptide. The model provides an explanation for the currently available NMR, X-ray diffraction and Langmuir monolayer results. The model also suggests mechanisms for the ability of gramicidin A to trigger a transition of the lipid from the lamellar to hexagonal II phase, the dependence of this transition on the lipid chain length and the formation of a lamellar phase with lysophosphatidylcholine.Abbreviations NMR nuclear magnetic resonance - DMPC dimyristoylphosphatidylcholine - S molecular order parameter - CSA chemical shift anisotropy - DPPC dipalmitoylphosphati-dylcholine - LPC lysophosphatidylcholine     

Structural similarities among the high molecular weight protein fractions of oilseeds

Data on the physico-chemical properties of proteins from soybean, groundnut, sesame seed, sunflower seed, safflower seed, mustard seed, rapeseed and cotton seed are fairly extensive. An examination of the available data on high molecular weight proteins suggests that there are similarities in many of their properties. In this report the similarity in amino acid composition, size and shape, molecular weight, secondary structure, subunit composition, association-dissociation at high and low pH, stability towards denaturants, hydrolysis by enzymes and quaternary structure of the high molecular weight proteins is discussed. Based on these similarities a model has been proposed for the associationdissociation, denaturation and reassociation behaviour of the high molecular weight proteins of oilseeds.     

Simulated nitrogen dynamics and nitrate leaching in a perennial grass ley

A soil nitrogen model was used for a 4-year simulation of nitrogen dynamics and nitrate leaching, both during grass ley growth and after ploughing a grass ley. Model results were compared with field measurements of soil mineral-N status and leaching. A soil water and heat model provided daily values for abiotic conditions, which were used as driving variables in the nitrogen simulation. Simulated values for mineral-N levels in the soil agreed well with field data for the first 3 years of the simulation. During the final year the model predicted considerably higher levels of soil mineral-N content compared with measurements. To reach the mineral-N level measured at the time of ploughing the ley, the simulated N-uptake by plants had to be increased by 8 g N m⁻². Simulations of nitrate leaching suggested that estimates of leaching based on measurements in tile-drained plots can be considerably underestimated. Accurate quantification of leaching in tile-drained plots often requires additional information on water-flow paths. A substantial increase in simulated and measured values for the mineral-N content of the soil occurred after ploughing the ley. In the simulation, most of the increase was due to a high crop residue input and the absence of a growing crop after ploughing. Litter accumulations in the soil during the 4-year period contributed little to the increase in soil mineral-N.     

Effects of root pruning of wheat at different nitrogen levels

In two experiments, wheat plants growing in solutions of different nitrogen concentration were subjected to root pruning. In higher concentrations of nitrogen the growth rate was higher, and the proportional allocation of growth to shoot higher, but pruning did not affect the allocation of growth at either level of nitrogen. This result gives no support to Thornley's source-sink model of the control of shoot: root ratio.     

Evaluation of microwave hyperthermia applicators.

Hyperthermia has been used in conjunction with radiation and chemotherapy for cancer treatment. When using electromagnetic heating, applicators are critical components in contact with or in proximity to patients and can be the determining factor for effective and safe treatment. Tissue absorption of electromagnetic energy is determined by many factors. Three cases are shown to illustrate the complexity of microwave heating: 1) The BSD MA-151 applicator has good center heating on a muscle-only phantom as shown in the operation manual. When fat slabs of 0.25, 0.5, 1, and 2 cm thick were added, two hot spots near the periphery of the applicator were evident on all fat surfaces, exposed at 631 MHz. At 915 MHz, the heating was elongated on the surface of the models with 0.25- and 2-cm fat, and two hot spots were observed on the 0.5- and 1-cm fat surfaces. 2) Heating patterns of the Clini-Therm applicators on a muscle-only phantom, as indicated in the operations guide, are elliptical with their major axes perpendicular to the electric field. However, when a bolus is used, the elliptical pattern is parallel to the E field. 3) Heating patterns in cylindrical structures were studied with inhomogeneous models of limbs. Arm and thigh models consisting of fat, bone, and muscle material were heated with Clini-Therm L, M, and MS applicators at 915 MHz. In addition to the geometric effect, the results indicated that placing the applicators with E field parallel to the long axis of cylindrical structures can minimize required power, produce less heating of fats and reduce stray radiation. In conclusion, to apply penetrating microwave or other RF fields for tissue heating, one must simulate the clinical exposure conditions as closely as possible to obtain useful heating patterns.     

Antigenic mapping of a human λ light chain: Correlation with three dimensional structure

Although the amino acid sequence and three-dimensional structure of human immunoglobulin light chains have been known for more than 15 years, the location of antigenic markers characteristic of chains has not been determined. Here, we use a set of synthetic overlapping peptides to completely model the sequence of the chain Mcg and test these for the binding or rabbit and goat antisera specific for chain determinants. We assess peptide contributions to -antigenic reactivity and also to identify a portion of C-region where conformational factors contribute to the antigenicity. Specific determinants occur both in the constant and variable (first and third framework) domains of the molecule. The fourth framework of the variable region, a segment specified by the joining gene, is also recognized and cross-reacts antigenically with the homologous region of T cell receptor chains. Major specific determinants are localized in the N- and C-terminal segments, which are linear and devoid of major conformational folding. Other segments that are strongly antigenic, such as the third framework of the V region (residue 78–93) and a segment of the constant region (residues 177–192), show strong conformational dependence in antigenicity.