Diatoms as indicators: The influences of experimental nitrogen enrichment on diatom assemblages in sub-Arctic streams

Indices using diatoms are widely used to assess water quality, but are usually constructed from field correlations and not tested through rigorous experimentation. We tested experimentally the performance of the Sørensen and the Shannon indices, and the trophic diatom index (TDI). Nitrogen was naturally limiting in the eight remote sub-Arctic streams used and we measured the effects of experimental nitrogen enrichment on diatom assemblages. Diatom densities increased significantly in the enriched reaches but there was no significant difference in invertebrate density between control and treatment reaches. Grazing effects were thus controlled for. Diversity within streams (Shannon index) was significantly reduced by nutrient addition but the Sørensen index did not change. The trophic diatom index (TDI), which is presumed to reflect nutrient concentration, was not influenced by nutrient addition and generally the values were low in both control and treatment reaches. Densities of the diatom genera Achnanthes and Gomphonema increased significantly with enrichment while those of Nitzschia and Fragilaria decreased significantly. Less abundant diatom species, which collectively constituted around 40% in relative abundance in the control reaches, were around 15–18% in treatment reaches. Growth forms were altered by the nutrients. Diatoms attached by mucilage pads were more abundant in treated reaches compared with control reaches. Motile diatoms became scarcer. The size of diatom species was unaffected by nutrient enrichment. This study showed that it is important to test experimentally indices that are developed for particular habitats before using them elsewhere.     

Resting Stages of Skeletonema marinoi Assimilate Nitrogen From the Ambient Environment Under Dark,Anoxic Conditions

The planktonic marine diatom Skeletonema marinoi forms resting stages, which can survive for decades buried in aphotic, anoxic sediments and resume growth when re-exposed to light, oxygen, and nutrients. The mechanisms by which they maintain cell viability during dormancy are poorly known. Here, we investigated cell-specific nitrogen (N) and carbon (C) assimilation and survival rate in resting stages of three S. marinoi strains. Resting stages were incubated with stable isotopes of dissolved inorganic N (DIN), in the form of ¹⁵N-ammonium (NH₄⁺) or -nitrate (NO₃⁻) and dissolved inorganic C (DIC) as ¹³C-bicarbonate (HCO₃⁻) under dark and anoxic conditions for 2 months. Particulate C and N concentration remained close to the Redfield ratio (6.6) during the experiment, indicating viable diatoms. However, survival varied between <0.1% and 47.6% among the three different S. marinoi strains, and overall survival was higher when NO₃⁻ was available. One strain did not survive in the NH₄⁺ treatment. Using secondary ion mass spectrometry (SIMS), we quantified assimilation of labeled DIC and DIN from the ambient environment within the resting stages. Dark fixation of DIC was insignificant across all strains. Significant assimilation of ¹⁵N-NO₃⁻ and ¹⁵N-NH₄⁺ occurred in all S. marinoi strains at rates that would double the nitrogenous biomass over 77–380 years depending on strain and treatment. Hence, resting stages of S. marinoi assimilate N from the ambient environment at slow rates during darkness and anoxia. This activity may explain their well-documented long survival and swift resumption of vegetative growth after dormancy in dark and anoxic sediments.     

Adhesion and motility of fouling diatoms on a silicone elastomer

Recent demands for non-toxic antifouling technologies have led to increased interest in coatings based on silicone elastomers that ‘release’ macrofouling organisms when hydrodynamic conditions are sufficiently robust. However, these types of coatings accumulate diatom slimes, which are not released even from vessels operating at high speeds ( > 30 knots). In this study, adhesion strength and motility of three common fouling diatoms (Amphora coffeaeformis var. perpusilla (Grunow) Cleve, Craspedostauros australis Cox and Navicula perminuta Grunow) were measured on a polydimethylsiloxane elastomer (PDMSE) and acid-washed glass. Adhesion of the three species was stronger to PDMSE than to glass but the adhesion strengths varied. The wall shear stress required to remove 50% of cells from PDMSE was 17 Pa for Craspedostauros, 24 Pa for Amphora and >> 53 Pa for Navicula; the corresponding values for glass were 3, 10 and 25 Pa. In contrast, the motility of the three species showed little or no correlation between the two surfaces. Craspedostauros moved equally well on glass and PDMSE, Amphora moved more on glass initially before movement ceased and Navicula moved more on PDMSE before movement ceased. The results show that fouling diatoms adhere more strongly to a hydrophobic PDMSE surface, and this feature may contribute to their successful colonization of low surface energy, foul-release coatings. The results also indicate that diatom motility is not related to adhesion strength, and motility does not appear to be a useful indicator of surface preference by diatoms.     

Review – Interactions between diatoms and stainless steel: focus on biofouling and biocorrosion

There is a considerable body of information regarding bacterially enhanced corrosion, however, this review focuses on diatoms (unicellular algae) whose contribution to biocorrosion is less well studied. The reasons why diatoms have been neglected in studies of biocorrosion in natural waters are discussed and the question whether diatoms should be considered as inert with respect of electrochemical processes is considered. A particular focus is given to the case of stainless steels (SS), which are widely used in variety of applications in natural waters. Basic information on the cell biology of diatoms is included in the review, particularly with respect to their ability to ‘sense’ and adhere to surfaces. Investigations at the nanoscale are reviewed as these studies provide information about the behavior of cells at interfaces. Recent advances include the use of atomic force microscopy (AFM), although only a few studies have been applied to diatoms. Regarding the electrochemical behavior of SS, the mechanisms by which diatoms influence the potential ennoblement process is discussed. Such studies reveal the association of diatoms, in addition to bacteria, with biocorrosion processes.     

Microfluidic detachment assay to probe the adhesion strength of diatoms

Fouling release (FR) coatings are increasingly applied as an environmentally benign alternative for controlling marine biofouling. As the technology relies on removing fouling by water currents created by the motion of ships, weakening of adhesion of adherent organisms is the key design goal for improved coatings. In this paper, a microfluidic shear force assay is used to quantify how easily diatoms can be removed from surfaces. The experimental setup and the optimization of the experimental parameters to study the adhesion of the diatom Navicula perminuta are described. As examples of how varying the physico-chemical surface properties affects the ability of diatoms to bind to surfaces, a range of hydrophilic and hydrophobic self-assembled monolayers was compared. While the number of cells that attached (adhered) was barely affected by the coatings, the critical shear stress required for their removal from the surface varied significantly.     

Hormonal interaction in sexual reproduction of Desmarestia aculeata (Phaeophyceae)

Male and female gametophytes of Desmarestia aculeata have been grown as clonal cultures. Red light permits vegetative growth only. Differentiation of oogonia and antheridia takes place under illumination with blue light as has been previously reported for several species of Laminaria. Morphological details for differentiation of oogonia and antheridia are presented, stressing the strong resemblance with the respective processes in Laminaria. Experimental evidence indicates the presence of a hormonal factor secreted by the eggs, which is responsible for discharge and subsequent attraction of spermatozoids to the egg.     

The complete chloroplast and mitochondrial genomes of the diatom Nitzschia palea (Bacillariophyceae) demonstrate high sequence similarity to the endosymbiont organelles of the dinotom Durinskia baltica

Nitzschia palea is a common freshwater diatom used as a bioindicator because of its tolerance of polluted waterways. There is also evidence it may be the tertiary endosymbiont within the “dinotom” dinoflagellate Durinskia baltica. A putative strain of N. palea was collected from a pond on the University of Virginia's College at Wise campus and cultured. For initial identification, three markers were sequenced—nuclear 18S rDNA, the chloroplast 23S rDNA, and rbcL. Morphological characteristics were determined using light and scanning electron microscopy; based on these observations the cells were identified as N. palea and named strain “Wise.” DNA from N. palea was deep sequenced and the chloroplast and mitochondrial genomes assembled. Single gene phylogenies grouped N. palea—Wise within a clearly defined N. palea clade and showed it was most closely related to the strain “SpainA3.” The chloroplast genome of N. palea is 119,447 bp with a quadripartite structure, 135 protein‐coding, 28 tRNA, and 3 rRNA genes. The mitochondrial genome is 37,754 bp with a single repeat region as found in other diatom chondriomes, 37 protein‐coding, 23 tRNA, and 2 rRNA genes. The chloroplast genomes of N. palea and D. baltica have identical gene content, synteny, and a 92.7% pair‐wise sequence similarity with most differences occurring in intergenic regions. The N. palea mitochondrial genome and D. baltica's endosymbiont mitochondrial genome also have identical gene content and order with a sequence similarity of 90.7%. Genome‐based phylogenies demonstrated that D. baltica is more similar to N. palea than any other diatom sequence currently available. These data provide the genome sequences of two organelles for a widespread diatom and show they are very similar to those of Durinskia baltica's endosymbiont.     

Application of statistically-based experimental designs for the optimization of eicosapentaenoic acid production by the diatom Nitzschia laevis

Statistically based experimental designs were applied to the optimization of medium components and environmental factors for eicosapentaenoic acid (EPA) production by the diatom Nitzschia laevis in heterotrophic conditions. First, the Plackett-Burman design was used to evaluate the effects of variables including medium components and environmental factors on cell growth and EPA production. Among these variables, NaCl, CaCl(2), PI metal solution, pH, and temperature were identified to have the significant effects (with confidence level > 90 %). Subsequently, the concentrations of NaCl, CaCl(2), PI metal solution as well as the values of pH and temperature were optimized using central composite design. The cell growth and EPA production were found to respectively correlate to NaCl, CaCl(2), pH, and temperature that could be represented by second-order polynomial models. The optimal values of the four parameters were determined by response surface and numerical analyses as 8 g/L NaCl, 0.10 g/L CaCl(2), pH 8.5 and 19.8 degrees C for cell dry weight (DW), and 14 g/L NaCl, 0.10 g/L CaCl(2), pH 8.5 and 18 degrees C for EPA production, respectively. The subsequent verification experiments confirmed the validity of the models. This optimization strategy led to a DW of 9 g/L, an EPA yield of 280 mg/L and an EPA productivity of 28 mg/L/d, respectively, which were considerably higher than those obtained in the previous studies.     

INTERACTIVE EFFECTS OF COPPER AND SILICIC ACID ON RESTING SPORE FORMATION AND VIABILITY IN A MARINE DIATOM1

The toxic effects of copper on resting spore formation and viability in the marine diatom Chaetoceros protuberans Lauder were determined both with and without silicic acid added to the medium. With silicic acid available, partial inhibition of resting spore formation occurred only at the highest cupric ion activity (pCu 8.6), while the percentage of cells forming spores at pCu's 10.2 and 11.3 was nearly the same as in the controls. Without silicic acid added to the medium, sporulation was completely inhibited at pCu 8.6 and greatly inhibited, at pCu 10.2. At pCu 11.3 and in the controls, the rate of spore formation was less than 50%. The results indicate that the inhibition of resting spore formation by copper is related to the concentration of silicic acid available to cells of C protuberans. This is consistent with previous studies which show that copper toxicity during vegetative growth involves interference with silicification in diatoms and is a Junction of the silicic acid concentration of the medium. Viable resting spores of C. protuberans were still present in cultures following exposure to elevated copper concentrations during a 100-day incubation period. This indicates that resting spores can serve to enhance diatom survival in areas polluted by heavy metals.