Sex and side differences and correlations between quantitative palmar characteristics in a sample Sardinian population

Differences between the sexes and between the sides and the correlations between four quantitative characteristics of palmar dermatoglyphics in a sample population of 809 individuals (418 males and 391 females) from the city of Cagliari, Sardinia, are tested. Males have a greater number of ridges than females, shown by a greater a-b ridge count and A-d ridge count, and a more transverse slope of the main lines, shown by a greater main line index and papillary number. The left palm shows a greater number of ridges than the right palm between the A line and the triradius d and between the triradii a and b, with a lower main line index and papillary number. The a-b ridge count has a negative correlation with the main line index and with the papillary number and a positive one with the A-d ridge count; these correlations are greater in the left palms, especially in the males.     

Effects of carbon-dioxide anaesthesia on the number of instars,larval duration and adult body size of the German cockroach, Blattella germanica

Effects of repeated carbon-dioxide anaesthesia during larval development on the number of moults, larval duration, and the body size of resulting adults were investigated. Concentration of carbon dioxide administered was 70%, and each period of anaesthesia lasted for 3 min. Anaesthesia administered twice a week until the 3rd instar increased the number of instars required to reach maturity. However, repeated anaesthesia after the 4th instar scarcely influenced the number of instars. On the other hand, repeated anesthesia prolonged larval duration whenever administered during the early or late instars. It is thus suggested that anaesthesia by carbon dioxide during larval development has two distinct effects: increasing the number of moults and prolonging larval duration. The former is stage specific and effective only during early instars, whereas the latter is effective during any particular instars until the last instar. The body size of resulting adults remained almost the same as for controls even after the repeated carbon-dioxide anaesthesia as many as 14 times. Some further observations concerning correlations between the number of moults, larval duration and adult body size are shown, and differences between the sexes regarding the number of instars and larval duration are also presented.     

A study on the minimum number of loci required for genetic evaluation using a finite locus model

For a finite locus model, Markov chain Monte Carlo (MCMC) methods can be used to estimate the conditional mean of genotypic values given phenotypes, which is also known as the best predictor (BP). When computationally feasible, this type of genetic prediction provides an elegant solution to the problem of genetic evaluation under non-additive inheritance, especially for crossbred data. Successful application of MCMC methods for genetic evaluation using finite locus models depends, among other factors, on the number of loci assumed in the model. The effect of the assumed number of loci on evaluations obtained by BP was investigated using data simulated with about 100 loci. For several small pedigrees, genetic evaluations obtained by best linear prediction (BLP) were compared to genetic evaluations obtained by BP. For BLP evaluation, used here as the standard of comparison, only the first and second moments of the joint distribution of the genotypic and phenotypic values must be known. These moments were calculated from the gene frequencies and genotypic effects used in the simulation model. BP evaluation requires the complete distribution to be known. For each model used for BP evaluation, the gene frequencies and genotypic effects, which completely specify the required distribution, were derived such that the genotypic mean, the additive variance, and the dominance variance were the same as in the simulation model. For lowly heritable traits, evaluations obtained by BP under models with up to three loci closely matched the evaluations obtained by BLP for both purebred and crossbred data. For highly heritable traits, models with up to six loci were needed to match the evaluations obtained by BLP.     

Structural heterozygosity in Scilla hyacinthoides L. and Scilla amoena L. (Liliaceae). Karyological analysis

Abstract

A karyological analysis carried out in Scilla hyacinthoides L. and Scilla amoena L. on material collected in the Botanical Garden of Cagliari (Sardinia), has shown the presence of heterozygous karyotypes in the two species. The chromosome number of S. hyacinthoides was found to be 2n = 20, while the chromosome number of S. amoena was 2n = 12, in accordance with the data found in the literature. Both the observed karyotypes show clear structural alterations, especially evident in one pair of clearly heteromorphic chromosomes. The analysis of the karyotypes seem to exclude a hybrid origin of the material examined and it is probable that such karyotypes may be the result of various structural re-arrangements, still evolving and aiming at a cytogenetic stabilization of the genus Scilla.     

Mineralized scale patterns on the cell periphery of the chrysophyte Mallomonas determined by comparative 3D Cryo-FIB SEM data processing

Unicellular protists can biomineralize spatially complex and functional shells. A typical cell of the photosynthetic synurophyte Mallomonas is covered by about 60–100 silica scales. Their geometric arrangement, the so-called scale case, mainly depends on the species and on the cell cycle. In this study, the scale case of the synurophyte Mallomonas was preserved in aqueous suspension using high-pressure freezing (HPF). From this specimen, a three-dimensional (3D) data set spanning a volume of about 25.6 μm × 19.2 μm × 4.2 μm with a voxel size of 12.5 nm × 12.5 nm × 25.0 nm was collected by Cryo-FIB SEM in 3 h and 24 min. SEM imaging using In-lens SE detection allowed to clearly differentiate between mineralized, curved scales of less than 0.2 μm thickness and organic cellular ultrastructure or vitrified ice. The three-dimensional spatial orientations and shapes of a minimum set of scales (N = 13) were identified by visual inspection, and manually segmented. Manual and automated segmentation approaches were comparatively applied to one arbitrarily selected reference scale using the differences in grey level between scales and other constituents. Computational automated routines and principal component analysis of the experimentally extracted data created a realistic mathematical model based on the Fibonacci pattern theory. A complete in silico scale case of Mallomonas was reconstructed showing an optimized scale coverage on the cell surface, similarly as it was observed experimentally. The minimum time requirements from harvesting the living cells to the final scale case determination by Cryo-FIB SEM and computational image processing are discussed.     

A chromosome‐scale genome assembly of Antheraea pernyi (Saturniidae,Lepidoptera)

Antheraea pernyi is a semi‐domesticated lepidopteran insect species valuable to the silk industry, human health, and ecological tourism. Owing to its economic influence and developmental properties, it serves as an ideal model for investigating divergence of the Bombycoidea super family. However, studies on the karyotype evolution and functional genomics of A. pernyi are limited by scarce genomic resource. Here, we applied PacBio sequencing and chromosome structure capture technique to assemble the first high‐quality A. pernyi genome from a single male individual. The genome is 720.67 Mb long with 49 chromosomes and a 13.77‐Mb scaffold N50. Approximately 441.75 Mb, accounting for 60.74% of the genome, was identified as repeats. The genome comprises 21,431 protein‐coding genes, 85.22% of which were functionally annotated. Comparative genomics analysis suggested that A. pernyi diverged from its common ancestor with A. yamamai ~30.3 million years ago, and that chromosome fission contributed to the increased chromosome number. The genome assembled in this work will not only facilitate future research on A. pernyi and related species but also help to progress comparative genomics analyses in Lepidoptera.     

Distinct genomic traits of acral and mucosal melanomas revealed by targeted mutational profiling

The incidence of melanoma is rising globally including China. Comparing to Caucasians, the incidence of non‐cutaneous melanomas is significantly higher in Chinese. Herein, we performed genomic profiling of 89 Chinese surgically resected primary melanomas, including acral (n = 54), cutaneous (n = 22), and mucosal (n = 13), by hybrid capture‐based next‐generation sequencing. We show that mucosal melanomas tended to harbor more pathogenic mutations than other types of melanoma, though the biological significance of this finding remains uncertain. Chromosomal arm‐level alterations including 6q, 9p, and 10p/q loss were highly recurrent in all subtypes, but mucosal melanoma was significantly associated with increased genomic instability. Importantly, 7p gain significantly correlated with unfavorable clinical outcomes in non‐cutaneous melanomas, representing an intriguing prognostic biomarker of those subtypes. Furthermore, focal amplification of 4q12 (KIT, KDR, and PDGFRα) and RAD51 deletion were more abundant in mucosal melanoma, while NOTCH2 amplification was enriched in acral melanoma. Additionally, cutaneous melanomas had higher mutation load than acral melanomas, while mucosal melanomas did not differ from other subtypes in mutation burden. Together, our data revealed important features of acral and mucosal melanomas in Chinese including distinctive driver mutation pattern and increased genomic instability. These findings highlight the possibilities of combination therapies in the clinical management of melanoma.     

Quantitative trait loci involved in the reproductive success of a parasitoid wasp

Dissecting the genetic basis of intraspecific variations in life history traits is essential to understand their evolution, notably for potential biocontrol agents. Such variations are observed in the endoparasitoid Cotesia typhae (Hymenoptera: Braconidae), specialized on the pest Sesamia nonagrioides (Lepidoptera: Noctuidae). Previously, we identified two strains of C. typhae that differed significantly for life history traits on an allopatric host population. To investigate the genetic basis underlying these phenotypic differences, we used a quantitative trait locus (QTL) approach based on restriction site‐associated DNA markers. The characteristic of C. typhae reproduction allowed us generating sisters sharing almost the same genetic content, named clonal sibship. Crosses between individuals from the two strains were performed to generate F2 and F8 recombinant CSS. The genotypes of 181 clonal sibships were determined as well as the phenotypes of the corresponding 4,000 females. Informative markers were then used to build a high‐quality genetic map. These 465 markers spanned a total length of 1,300 cM and were organized in 10 linkage groups which corresponded to the number of C. typhae chromosomes. Three QTLs were detected for parasitism success and two for offspring number, while none were identified for sex ratio. The QTLs explained, respectively, 27.7% and 24.5% of the phenotypic variation observed. The gene content of the genomic intervals was investigated based on the genome of C. congregata and revealed 67 interesting candidates, as potentially involved in the studied traits, including components of the venom and of the symbiotic virus (bracovirus) shown to be necessary for parasitism success in related wasps.