顺磁物质对土壤低场核磁共振信号特征及含水量测定的影响

核磁共振(NMR)技术由于具有高效快速、不破坏土壤结构且对人体无害等优点,逐渐被应用到土壤学相关领域研究中。然而,土壤中顺磁物质的存在对核磁共振信号特征的影响仍不明确。本研究旨在揭示顺磁物质对不同类型土壤低场核磁共振(LF-NMR)信号特征和土壤含水量测定的影响。结果表明:土壤水的LF-NMR信号量最高可达150左右,土壤矿物、有机质和微生物等固相物质的LF-NMR信号量基本不超过0.3,相对可以忽略。质地和顺磁物质对土壤水的LF-NMR信号量测量有更大影响。LF-NMR仪器存在弛豫时间监测盲区,信号量损失主要是由于顺磁物质加速了水中氢质子的弛豫过程,导致小孔隙中水分反馈的极快的LF-NMR信号不能被监测设备捕获。对于顺磁物质含量较少的壤性潮土(1.2%)和黏壤性黑土(1.3%),LF-NMR信号量损失不大,其与土壤含水量呈线性关系;但对于黏粒含量(45.3%)和顺磁物质含量(4.0%)较高的黏性红壤,测定中会损失一部分LF-NMR信号量,监测到的LF-NMR信号量与土壤含水量不再呈线性关系。此外,外源添加顺磁物质(3.0 g·L^-1的MnCl₂溶液)也会降低黑土和红壤中可被监测的LF-NMR信号量,黑土和红壤的信号量最大损失率分别为41.0%和46.7%,极大地改变其与土壤含水量之间的定量关系。因此,在利用LF-NMR测量富含顺磁物质(>1.3%)或有外源顺磁物质进入的黏性土壤的含水量时,应先通过校正降低顺磁物质等对LF-NMR信号量的影响。研究结果对利用低场核磁共振技术准确分析土壤水分分布及土壤孔隙结构具有重要意义。     

社会经济代谢研究:内涵、发现和展望

社会经济代谢是指由于人类活动导致的物质和能量在社会经济系统内部和边界上的迁移和转换。社会经济代谢研究已经成为产业生态学的核心领域。本文结合典型案例介绍了社会经济代谢研究的内涵和基本步骤,总结了社会经济代谢研究的主要发现:提供了追踪物质在社会经济系统的来源、去向和流动路径的方法与模型;揭示了物质材料及其社会经济代谢过程对现代化生产和生活方式的支撑作用;阐明了人类活动驱动与物质代谢相关的生态环境问题的机制;提供了评估资源利用效率、资源供需趋势和城市矿产开发潜力的模型与基础数据。最后指出了社会经济代谢研究的发展方向:增加研究对象并深化对每种对象的研究精度;拓展或细化研究系统的时空边界;引入并融合新的数据来源和研究方法;将社会经济代谢中的物质流对接到与其相关的生态环境影响;建立可共享、可拓展、可累积的数据平台。     

雷公藤提取物中主要物质基础及其抗肿瘤活性研究北大核心CSCD

为进一步阐明雷公藤中的主要物质基础,并评价其抗肿瘤活性。该研究采用柱层析、HPLC等技术,对雷公藤提取物进行研究。结果表明:(1)从雷公藤95%乙醇提取物中分离得到12个化合物,根据理化性质及波谱数据鉴定各化合物的结构分别为α,β-amyrenone(1)、3β-acetoxyolean-12-en-28-oic acid(2)、antriptolactone(3)、ω-hydroxypropioquaiacone(4)、3-(4-hydroxy-3-methoxyphenyl)-propenal(5)、3-methoxy-4-hydroxy phenylethanol(6)、vanillin(7)、3,4,5-三甲氧基苯酚(8)、对羟基苯甲酸(9)、对羟基苯甲醛(10)、vanillyl alcohol(11)、2,6-dimethxy-1,4-benzoquinone(12)。其中,化合物1、2、5、12为首次在该属植物中分离得到。(2)采用噻唑蓝(MTT)法对12个化合物进行抗SH-SY5Y细胞株、K562细胞株和Hel细胞株3种肿瘤细胞系细胞增殖活性的筛选,并对活性较好的化合物12进行Hoechst荧光染色和促凋亡作用的检测发现,化合物2、3、5、12具有一定的抗肿瘤活性,其中化合物12的抗肿瘤活性最为显著(SH-SY5Y细胞、Hel细胞、K562细胞的IC_(50)值分别为35.6、14.3、28.8μmol·L^(-1))。该研究结果进一步丰富了雷公藤的化学成分,发现了1个具有明显抗肿瘤活性的单体物质,为雷公藤的进一步开发提供了科学依据。     

Construction and structure studies of DNA-bipyridine complexes as versatile scaffolds for site-specific incorporation of metal ions into DNA

The facile construction of metal–DNA complexes using ‘Click’ reactions is reported here. A series of 2′-propargyl-modified DNA oligonucleotides were initially synthesized as structure scaffolds and were then modified through ‘Click’ reaction to incorporate a bipyridine ligand equipped with an azido group. These metal chelating ligands can be placed in the DNA context in site-specific fashion to provide versatile templates for binding various metal ions, which are exchangeable using a simple EDTA washing-and-filtration step. The constructed metal–DNA complexes were found to be thermally stable. Their structures were explored by solving a crystal structure of a propargyl-modified DNA duplex and installing the bipyridine ligands by molecular modeling and simulation. These metal–DNA complexes could have wide applications as novel organometallic catalysts, artificial ribonucleases, and potential metal delivery systems.     

Effects of divercin V41 combined to NaCl content, phenol (liquid smoke) concentration and pH on Listeria monocytogenes ScottA growth in BHI broth by an experimental design approach

AIMS: To investigate the main effects and interactions of different factors : divercin V41 (0-4 ng ml(-1)), NaCl content (0.5-5.5% w v(-1)), phenol (liquid smoke) concentration (0-8 ppm), and pH (5.5-7.5) on Listeria monocytogenes ScottA growth. METHODS AND RESULTS: Experiments were carried out in BHI broth using a central composite design. Divercin V41 (div41), NaCl content and pH were found to be the most influential factors whereas phenol concentration in liquid smoke had no effect on L. monocytogenes ScottA growth in our experimental domain. The combined effects of div41, NaCl content and pH decreased L. monocytogenes ScottA maximum specific growth rate (mu(max)) from 0.34 to 0.01 h(-1) and led to a significant increase in lag time (t(lag)) from 5.5 to 25 h. CONCLUSION: In this study, NaCl, pH and phenol conditions were similar to those currently observed in smoked salmon production. This shows that L. monocytogenes ScottA growth could be efficiently delayed by the use of div41 in addition to the usual technological hurdles. SIGNIFICANCE AND IMPACT OF THE STUDY: In conclusion, the technological hurdles of cold smoked salmon production could be further optimized and combined with the use of div41 or the div41 producer strain to improve the food safety of the product.     

Preparation of a beef-extract as a laboratory reference material for the determination of heterocyclic amines

The present paper describes the preparation of a suitable laboratory reference material (LRM) to validate analytical methods for the determination of heterocyclic amines (HAs) in foods. Three different lots of reference material were prepared using a beef extract which was contaminated with a well-known quantity of amines at different levels ranging from 10 to 75 ng/g. These materials were then lyophilised under determined conditions and, after grinding and sieving, homogenised and, finally, bottled and labelled. Homogeneity and stability studies were performed and no statistical differences were observed in the analysis of variances for within- and between-bottle results, thus demonstrating the homogeneity of the material. Stability at different storage temperatures (-18, +4, +25 and +40 degrees C) and times (1, 2, 3 and 6 months) was also tested. Therefore, the material can be considered homogeneous and stable and can be proposed for use in inter-comparison exercises for the determination of HAs.     

Long and short term variations in suspended particulate material: the influence on light available to the phytoplankton community

The magnitude and frequency of events leading to changes in turbidity have been studied in a large (61 km²), shallow (mean depth 3.4 m) wind-exposed lake basin at the western end of Lake Mälaren, Sweden. In this paper we couple changes in suspended particulate inorganic material (SPIM) resulting from wind driven sediment resuspension, and variations in the discharge and sediment load, to spectral variations in subsurface light and estimates of photosynthetically active radiation (PAR). To accomplish this we use a semi-analytical model which predicts the spectral variations in downwelling irradiance (E _d()) and the attenuation coefficient of downwelling irradiance (K _d()), as a function of the concentrations of chlorophyll, dissolved yellow substances, and suspended inorganic and organic particulate material. Unusually high river discharge, led to large inputs of yellow substances and large in lake yellow substance concentrations (a _ys(420) 20 m^–1), causing variations in yellow substance concentration to have the greatest role in influencing temporal trends in the attenuation of PAR and variations in the depth of the euphotic zone (Z _eup). In spite of this, variations in SPIM could account for approximately 60% of the variation in Z _eup attributed to changes in yellow substances alone. Our results show that changes in suspended sediment concentration leads to both long-term and short-term changes in the attenuation of PAR, even in the presence of high concentrations of dissolved yellow substances.     

Metabolic behavior of immobilized Candida guilliermondii cells during batch xylitol production from sugarcane bagasse acid hydrolyzate

Candida guilliermondii cells, immobilized in Ca-alginate beads, were used for batch xylitol production from concentrated sugarcane bagasse hydrolyzate. Maximum xylitol concentration (20.6 g/L), volumetric productivity (0.43 g/L. h), and yield (0.47 g/g) obtained after 48 h of fermentation were higher than similar immobilized-cell systems but lower than free-cell cultivation systems. Substrates, products, and biomass concentrations were used in material balances to study the ways in which the different carbon sources were utilized by the yeast cells under microaerobic conditions. The fraction of xylose consumed to produce xylitol reached a maximum value (0.70) after glucose and oxygen depletion while alternative metabolic routes were favored by sub-optimal conditions.     

A bimetallic oxide hybrid material constructed from a coordination complex polymer and molybdenum oxide subunits, [Ni(3,4′-bipyridine)2MoO4]·3H2O

The hydrothermal reaction of NiCl₂·6H₂O, MoO₃, 3,4′-bipyridine (3,4′-bpy) and H₂O in the mole ratio 1.0:1.0:2.1:1500 yields [Ni(3,4′-bpy)₂MoO₄]·3H₂O (1·3H₂O) in 80% yield. The structure of 1·3H₂O consists of a three-dimensional coordination polymer {Ni(3,4′-bpy)₂}_n²ⁿ⁺ with entrained {MoO₄}²⁻ tetrahedra and with water molecules of crystallization occupying channels within the bimetallic oxide-ligand framework. Crystal data: C₂₀H₁₆N₄O₄NiMo·3H₂O (1·3H₂O), tetragonal P4₁2₁2, a=13.1866(5) Å, c=29.458(2) Å, V=5122.3(4) ų, Z=8, D_calc=1.532 g cm⁻³.