Purification and Characterization op a 31-Kilodalton Iron-Regulated Periplasmic Protein from Pasteurella Haenolytica A1

ABSTRACT

A prominent iron-regulated periplasmic protein was purified from Pasteurella haemolytica grown in an iron-deficient chemically defined medium. The protein was purified by anion exchange chromatography and appeared as a single band by SDS-PAGE with a molecular weight of 32,000. A yield of five mg was obtained from 91 mg of protein extract. The iron-regulated protein existed as a monomer in the native state with an average molecular weight of 29,877 as determined by analytical ultracentrifugation. The protein had a molecular weight of 30,880 as determined by matrix-assisted laser desorption mass spectrometry, hence the protein is referred to as the 31 kDa protein. Isoelectric focusing showed four bands with pIs of 7.15, 6.8, 6.6, and 5.9, The secondary structure of the protein was determined by circular dichroism and contained 16% α-helical structure. The N-terminal sequence, EPFKVVTTFTVIQDIAQNVAGDKAT, showed a 95% identity with the 31 kDa iron-binding protein from Haemophilus influenzae. Isolation and characterization of iron-regulated proteins are of particular interest because of their potential roles in iron assimilation and microbial virulence.     

High-throughput proteomics using Fourier transform ion cyclotron resonance mass spectrometry

The advent of high-throughput proteomic technologies for global detection and quantitation of proteins creates new opportunities and challenges for those seeking to gain greater understanding of the cellular machinery. Here, recent advances in high-resolution capillary liquid chromatography coupled to Fourier transform ion cyclotron resonance mass spectrometry are reviewed along with its potential application to high-throughput proteomics. These technological advances combined with quantitative stable isotope labeling methodologies provide powerful tools for expanding our understanding of biology at the system level.     

Isobaric protein and peptide quantification: perspectives and issues

An important challenge for proteomics is the ability to compare protein levels across biological samples. Since their introduction, isotopic and isobaric peptide labeling have played an important role in relative quantitative comparisons of proteomes. One important drawback of most of the isotopic-labeling techniques is an increase in sample complexity. This problem was successfully addressed with the construction of isobaric labeling strategies, such as isobaric tag for relative and absolute quantification (iTRAQ), tandem mass tagging, the cleavable isobaric affinity tag, dimethylated leucines and isobaric peptide termini labeling. Furthermore, numerous applications for multiplexing using iTRAQ and tandem mass tagging have been reported.     

Aryldiazomethane Derivatives as Reagents for Site Specific Labeling of Nucleic Acids at Phosphate

Abstract

An efficient and direct labeling method based on direct alkylation of nucleic acids at phosphates by aryldiazomethane derivatives is described.     

Cyclosporine A and PSC833 inhibit ABCA1 function via direct binding

ATP-binding cassette protein A1 (ABCA1) plays a key role in generating high-density lipoprotein (HDL). However, the detailed mechanism of HDL formation remains unclear; in order to reveal it, chemicals that specifically block each step of HDL formation would be useful. Cyclosporine A inhibits ABCA1-mediated cholesterol efflux, but it is not clear whether this is mediated via inhibition of calcineurin. We analyzed the effects of cyclosporine A and related compounds on ABCA1 function in BHK/ABCA1 cells. Cyclosporine A, FK506, and pimecrolimus inhibited ABCA1-mediated cholesterol efflux in a concentration-dependent manner, with IC₅₀ of 7.6, 13.6, and 7.0 μM, respectively. An mTOR inhibitor, rapamycin also inhibited ABCA1, with IC₅₀ of 18.8 μM. The primary targets for these drugs were inhibited at much lower concentrations in BHK/ABCA1 cells, suggesting that they were not involved. Binding of [³H] cyclosporine A to purified ABCA1 could be clearly detected. Furthermore, a non-immunosuppressive cyclosporine, PSC833, inhibited ABCA1-mediated cholesterol efflux with IC₅₀ of 1.9 μM, and efficiently competed with [³H] cyclosporine A binding to ABCA1. These results indicate that cyclosporine A and PSC833 inhibit ABCA1 via direct binding, and that the ABCA1 inhibitor PSC833 is an excellent candidate for further investigations of the detailed mechanisms underlying formation of HDL.     

Fabrication of Carbon Nanotube High-Frequency Nanoelectronic Biosensor for Sensing in High Ionic Strength Solutions

The unique electronic properties and high surface-to-volume ratios of single-walled carbon nanotubes (SWNT) and semiconductor nanowires (NW) ^1-4 make them good candidates for high sensitivity biosensors. When a charged molecule binds to such a sensor surface, it alters the carrier density⁵ in the sensor, resulting in changes in its DC conductance. However, in an ionic solution a charged surface also attracts counter-ions from the solution, forming an electrical double layer (EDL). This EDL effectively screens off the charge, and in physiologically relevant conditions ~100 millimolar (mM), the characteristic charge screening length (Debye length) is less than a nanometer (nm). Thus, in high ionic strength solutions, charge based (DC) detection is fundamentally impeded^6-8.We overcome charge screening effects by detecting molecular dipoles rather than charges at high frequency, by operating carbon nanotube field effect transistors as high frequency mixers^9-11. At high frequencies, the AC drive force can no longer overcome the solution drag and the ions in solution do not have sufficient time to form the EDL. Further, frequency mixing technique allows us to operate at frequencies high enough to overcome ionic screening, and yet detect the sensing signals at lower frequencies^11-12. Also, the high transconductance of SWNT transistors provides an internal gain for the sensing signal, which obviates the need for external signal amplifier.Here, we describe the protocol to (a) fabricate SWNT transistors, (b) functionalize biomolecules to the nanotube¹³, (c) design and stamp a poly-dimethylsiloxane (PDMS) micro-fluidic chamber¹⁴ onto the device, and (d) carry out high frequency sensing in different ionic strength solutions¹¹.     

Antibody Staining in C. Elegans Using "Freeze-Cracking"

To stain C. elegans with antibodies, the relatively impermeable cuticle must be bypassed by chemical or mechanical methods. "Freeze-cracking" is one method used to physically pull the cuticle from nematodes by compressing nematodes between two adherent slides, freezing them, and pulling the slides apart. Freeze-cracking provides a simple and rapid way to gain access to the tissues without chemical treatment and can be used with a variety of fixatives. However, it leads to the loss of many of the specimens and the required compression mechanically distorts the sample. Practice is required to maximize recovery of samples with good morphology. Freeze-cracking can be optimized for specific fixation conditions, recovery of samples, or low non-specific staining, but not for all parameters at once. For antibodies that require very hard fixation conditions and tolerate the chemical treatments needed to chemically permeabilize the cuticle, treatment of intact nematodes in solution may be preferred. If the antibody requires a lighter fix or if the optimum fixation conditions are unknown, freeze-cracking provides a very useful way to rapidly assay the antibody and can yield specific subcellular and cellular localization information for the antigen of interest.     

Global combined precursor isotopic labeling and isobaric tagging (cPILOT) approach with selective MS3 acquisition

Recently, we reported a novel proteomics quantitation scheme termed “combined precursor isotopic labeling and isobaric tagging (cPILOT)” that allows for the identification and quantitation of nitrated peptides in as many as 12–16 samples in a single experiment. cPILOT offers enhanced multiplexing and posttranslational modification specificity, however excludes global quantitation for all peptides present in a mixture and underestimates reporter ion ratios similar to other isobaric tagging methods due to precursor co‐isolation. Here, we present a novel chemical workflow for cPILOT that can be used for global tagging of all peptides in a mixture. Specifically, through low pH precursor dimethylation of tryptic or LysC peptides followed by high pH tandem mass tags, the same reporter ion can be used twice in a single experiment. Also, to improve triple‐stage mass spectrometry (MS³) data acquisition, a selective MS³ method that focuses on product selection of the y₁ fragment of lysine‐terminated peptides is incorporated into the workflow. This novel cPILOT workflow has potential for global peptide quantitation that could lead to enhanced sample multiplexing and increase the number of quantifiable spectra obtained from MS³ acquisition methods.     

LabCaS: Labeling calpain substrate cleavage sites from amino acid sequence using conditional random fields

The calpain family of Ca²⁺‐dependent cysteine proteases plays a vital role in many important biological processes which is closely related with a variety of pathological states. Activated calpains selectively cleave relevant substrates at specific cleavage sites, yielding multiple fragments that can have different functions from the intact substrate protein. Until now, our knowledge about the calpain functions and their substrate cleavage mechanisms are limited because the experimental determination and validation on calpain binding are usually laborious and expensive. In this work, we aim to develop a new computational approach (LabCaS) for accurate prediction of the calpain substrate cleavage sites from amino acid sequences. To overcome the imbalance of negative and positive samples in the machine‐learning training which have been suffered by most of the former approaches when splitting sequences into short peptides, we designed a conditional random field algorithm that can label the potential cleavage sites directly from the entire sequences. By integrating the multiple amino acid features and those derived from sequences, LabCaS achieves an accurate recognition of the cleave sites for most calpain proteins. In a jackknife test on a set of 129 benchmark proteins, LabCaS generates an AUC score 0.862. The LabCaS program is freely available at: http://www.csbio.sjtu.edu.cn/bioinf/LabCaS . Proteins 2013. © 2012 Wiley Periodicals, Inc.