Influence of phosphate rock sources and rates on rice and common bean production in an Oxisol

A field experiment was conducted for five consecutive years to determine upland rice (Oryza sativa L.) and common bean (Phaseolus vulgaris L.) response to eight P sources at three P rates in an Oxisol of Central Brazil. The P sources tested were triple superphosphate (TSP), Arafertil phosphate partially acidulated (APPA), phosphate of Patos partially acidulated (PPPA), phosphate of Araxa concentrated (PAC), phosphate of Catalao (PC), phosphate of Jacupiranga (PJ), phosphate of Patos de Minas (PPM), and phosphate of Abaete (PA). All phosphate rock sources were of Brazilian origin. The P rates used were 87, 174 and 262 kg P ha^-1. Yield response to P sources and rates varied from crop to crop. Rice and bean yields were significantly correlated with Bray 1 P, but not Mehlich 1 P. In the first year, TSP and the two partially acidulated phosphate rocks (APPA, PPPA) produced higher grain yields. In the second year and all remaining years of the experiment, the efficiency of phosphate rock sources as measured by grain yield was equivalent to TSP or partially acidulated P sources. The results suggest that these phosphate rock sources could be used in rice-bean rotations on Brazilian Oxisols. Yield losses in the first year could be partially offset by the addition of a small amount of soluble P.     

Role of magnesium in combination with liming in alleviating acid-soil stress with the aluminium-sensitive sorghum genotype CV323

An experiment to study the effects of Mg nutrition on root and shoot development of the Al-sensitive sorghum (Sorghum bicolor (L.) Moench) genotype CV323 grown in pots of sandy loam under different acid soil stress is reported. This experiment had a factorial design: four rates of liming were combined with four rates of Mg fertilization. When no Mg was added, the pH of the soil solutions (collected in ceramic cups) increased from 4.0 (unlimed) to 4.2, 4.7 and 5.9 at the increasing rates of liming. After 30 days of growth dry matter yields of the limed treatments were 40%, 115% and 199% higher than that of the unlimed treatment. Without liming and at the highest liming rate, adding Mg did not affect plant biomass significantly. At the two intermediate levels of liming, however, 11.3 mg extra Mg per kg soil increased dry matter yield to the same levels as found at the highest liming rate. Concentrations of Mg in the soil solution rose after Mg was added and fell when lime was added, but adding both Mg and lime increased Mg concentrations in the plant shoots. In plants of the limed treatments, dry matter yield was correlated closely with the Mg concentration in the shoot. This was not so in the unlimed treatment. Furthermore, in the unlimed treatments root development was inhibited, but reduced Mg uptake by the plants resulted mainly from the direct effect of Al- (or H-) ions in the soil solution rather than from impaired root development. It is concluded that Mg fertilization counteracted the interfering effects of Al- and H ions on Mg uptake.     

A genetically related response to iron deficiency stress in muskmelon

A mutant muskmelon (Cucumis melo L.) with characteristic Fe-deficiency chlorosis symptoms was compared to related cultivars in its ability to obtain Fe via the widely known Fe-stress response mechanisms of dicotyledonous plants. The three cultivars (fefe, the Fe-inefficient mutant; Mainstream and Edisto, both Fe efficient plants) were grown in nutrient solution in either 0 or 3.5 mg L^-1 Fe as FeCl₃. None of the three cultivars released reductants or phytosiderophores, but both Edisto and Mainstream produced massive amounts of H+ ions to reduce and maintain the pH of nutrient solutions below pH 4.0. The roots of these two Fe-efficient cultivars were also capable of reducing Fe³⁺ to Fe²⁺. These responses maintained green plants, resulted in high leaf Fe in both Edisto and Mainstream, and produced Mn toxicity in Mainstream. The lack of Fe-deficiency stress response in fefe not only affected leaf Fe concentration and chlorosis, but also resulted in reduced uptake of Mn. The importance of reduced Fe (Fe²⁺) to the Fe-efficient cultivars was confirmed by growing the cultivars with BPDS (4, 7-diphenyl-1, 10-phenanthroline disulfonic acid, a ferrous chelator) and EDDHA [ethylene-diamine di (0-hydroxphenylacetic acid)] (a ferric chelator), and observing increased chlorosis and reduced Fe uptake in BPDS grown plants. The Fe-deficiency response observed in these cultivars points out the diversity of responses to Fe deficiency stress in plants. The fefe mutant has a limited ability to absorb Fe and Mn and perhaps could be used to better understand Mn uptake in plants.     

Immunocytochemical localization of conglutin γ and legumin-like globulin in developing and mature seeds ofLupinus albus L.

Summary The distribution of two seed proteins, namely conglutin and a legumin-like globulin, in developing and mature seeds ofLupinus albus L. has been examined by immunocytochemistry and the concomitant modifications of their constituent polypeptides followed by SDS-PAGE. Both proteins were found within vacuolar protein bodies in various tissues of the cotyledons, although with some differences in the distribution patterns. The legumin-like protein was found to be deposited within the large storage parenchyma cells of the cotyledons in a manner similar to that reported for other storage proteins; little or no immunolabelling was associated with the cotyledonary epidermal and vascular parenchyma cells. In contrast conglutin was present in all cell types.A precursor of the legumin-like protein accumulated transiently in the developing cotyledon, but was subsequently modified by proteolytic cleavage. The onset of such modification was concomitant with a transition in the predominant vacuolar forms within the storage parenchyma cells. No precursor molecules of conglutin have been detected in this study, thus indicating that this protein is deposited in the protein bodies in its mature form.Abbreviations LM light microscopy - EM electron microscopy - DAF days after flowering - SDS-PAGE sodium dodecyl sulphate polyacrylamide gel electrophoresis - GAR goat antirabbit antiserum     

Genetic diversity among progenitors and elite lines from the Iowa Stiff Stalk Synthetic (BSSS) maize population: comparison of allozyme and RFLP data

Summary Data for restriction fragment length polymorphisms (RFLPs) of 144 clone-enzyme combinations and for 22 allozyme loci from 21 U.S. Corn Belt maize (Zea mays L.) inbreds were analyzed. The genetic materials included 14 progenitors of the Iowa Stiff Stalk Synthetic (BSSS) maize population, both parents of one missing BSSS progenitor, four elite inbreds derived from BSSS, and inbred Mo17. Objectives were to characterize the genetic variation among these 21 inbreds for both allozymes and RFLPs, to compare the results from both types of molecular markers, and to estimate the proportion of unique alleles in the BSSS progenitors. Genetic diversity among the 21 inbreds was substantially greater for RFLPs than for allozymes, but the percentages of unique RFLP variants (27%) and unique allozyme alleles (25%) in the BSSS progenitors were similar. Genetic distances between inbreds, estimated as Rogers' distance (RD), were, on average, twice as large for RFLP (0.51) as for allozyme data (0.24). RDs obtained from allozyme and RFLP data for individual line combinations were only poorly correlated (r = 0.23); possible reasons for discrepancies are discussed. Principal component analysis of RFLP data, in contrast to allozyme data, resulted in separate groupings of the ten BSSS progenitors derived from the Reid Yellow Dent population, the four BSSS elite lines, and Mo17. The remaining six BSSS progenitors were genetically rather diverse and contributed a large number of rare alleles to BSSS. The results of this study corroborate the fact that RFLPs are superior to allozymes for characterizing the genetic diversity of maize breeding materials, because of (1) the almost unlimited number of markers available and (2) the greater amount of polymorphisms found. In particular, RFLPs allow related lines and inbreds with common genetic background to be identified, but a large number of probe-enzyme combinations is needed to estimate genetic distances with the precision required.Joint contribution from Cereal and Soybean Research Unit, USDA, Agricultural Research Service, and Journal Paper No. J-14236 of the Iowa Agricultural and Home Economics Experiment Station, Projects 2818 and 2778     

An integrated approach to oilseed rape cultivar selection using phenotypic stability

Summary Various methods of evaluating phenotypic stability have been proposed; however, no single method can adequately describe cultivar performance. The objectives of this study were to integrate a number of methods of evaluating stability and to use this approach for cultivar selection. These objectives were considered in the context of the broad-based oilseed rape cultivar (Brassica napus spp. oleifera) evaluation system currently used in western Canada. Regression analysis was used to assess cultivar response to environments. Cluster analysis was used to assemble cultivars into groups with similar regression coefficients (b _i ) and mean yield. Three parametric stability parameters, years within locations mean square (MS; Y/L), Shukla's stability variance ( _i ² ), and Francis and Kannenberg's coefficient of variability (CV _i ), were compared to determine which method would be most suitable for selection of oilseed rape cultivars from within clustered groups. Yield data from three cultivars and six breeding lines that had been tested for 2 years at 26 locations in the Western Canola Cooperative Test A were used for all calculations. The cluster analysis was successful in identifying commercially acceptable breeding lines. The parameter MS _i Y/L was considered to be more appropriate than either CV _i or _i ² , because it measured only the unpredictable portion of the genotype x environment interaction and was independent of the other cultivars in the test. The use of cluster analysis to group entries with similar b _i values and mean yields, followed by selection for stability within groups, was advocated.Contribution No. 846 of the Plant Science Department, University of Manitoba     

Production of n + 1 plants and tetrasomics by means of anther culture of trisomic plants in rice (Oryza sativa L.)

Summary Eleven primary trisomics of rice, variety Nipponbare, were subjected to anther culture. The 12th trisomic did not produce normal anthers. A total of 3,734 plants were obtained, which were examined morphologically at the seedling stage in the greenhouse. A number of plants appeared in the progenies of ten trisomics which had unique morphological features. The frequency of these variant types differed among different progenies. Cytological observations revealed that 43 variant plants in the progenies of nine trisomics had 13 chromosomes (n + 1), and 56 were tetrasomics (2n = 26). The tetrasomic plants in the progeny of a trisomic were morphologically identical. Similarly, n + 1 plants in the progeny of a trisomic were also identical. Plants with 23, 25, 36, 39, and 73 chromosomes were also obtained. Results show that valuable aneuploids such as n + 1 and 2n + 2 can be obtained in the anther-culture-derived progenies of trisomics.     

New disease resistance genes in soybean against Pseudomonas syringae pv glycinea: evidence that one of them interacts with a bacterial elicitor

Summary Soybean [Glycine max (L.) Merr.] cultivars Flambeau and Merit differed in their resistance to Pseudomonas syringae pv glycinea (Psg) race 4, carrying each of four different avirulence (avr) genes cloned from Psg or the related bacterium, Pseudomonas syringae pv tomato. Segregation data for F₂ and F₃ progeny of Flambeau x Merit crosses indicated that single dominant and nonallelic genes account for resistance to Psg race 4, carrying avirulence genes avrA, avrB, avrC, or avrD. Segregants were also recovered that carried all four or none of the disease resistance genes. One of the disease resistance genes (Rpg1, complementing bacterial avirulence gene B) had been described previously, but the other three genes — designated Rpg2, Rpg3, and Rpg4 — had not here to fore been defined. Rpg3 and Rpg4 are linked (40.5 ± 3.2 recombination units). Rpg4 complements avrD, cloned from Pseudomonas syringae pv tomato, but a functional copy of this avirulence gene has not thus far been observed in Pseudomonas syringae pv glycinea. Resistance gene Rpg4 therefore may account in part for the resistance of soybean to Pseudomonas syringae pv tomato and other pathogens harboring avrD.     

Identification of superior parents in a potato breeding programme

Summary An incomplete diallel cross was used to study components of genetic variation in potatoes for a range of characters after early and late harvest. The progenies were also used to evaluate five predictors of progeny performance, namely the mean seedling performance, the mid-parent value and the means of the selfed progenies, of the diploid progenies and of the test-cross progenies. For almost all characters, the general combining ability effects were predominant, although the specific combining ability effects present were greater at late than at early harvests. The seedling performance for tuber yield, number of tubers and average tuber weight did not show any relevant relationship to the field performance. The midparent value provided, in general, satisfactory predictions of the mean progeny performance obtained in the diallel, except for ware tuber yield. The selfed and the diploid progenies did not improve the prediction of progeny means compared to the mid-parent value. The predictions based on the test-crosses surpassed those of the mid-parent value, particularly for tuber yield at ware potato harvest. Methods to identify superior parents are discussed.     

Prediction of F3 row performance from F2 individual plant data in oats

Summary Parameters estimated from a Gardner-Eberhart analysis of the F₂ generation of a six-parent diallel in oats (Avena sativa L.) were used to compare methods for predicting the performance of F₃ row plots. The prediction methods were: (1) individual F₂ plant performance (F2I), (2) parent average plus F₂ plot deviations (PF2), (3) parent average plus weighted F₂ plot deviations (PF2P), (4) best linear unbiased prediction (BLUP) of parent average plus F₂ plot deviations (BPF2), and (5) BLUP plus weighted F₂ deviations (BF2). The F₂ single-plant traits used for prediction were biological yield to predict F₃ biological yield, whole plant and primary tiller grain yield for prediction of F₃ grain yield, and whole plant and primary tiller harvest index (HI) to predict F₃ HI. Prediction methods were evaluated by correlations between predicted and observed F₃ performance. Prediction methods and traits for which correlations were greater than for F2I included: BF2 for biological yield, PF2, PF2P and BF2 for whole plant grain yield, PF2, BPF2, and BF2 for primary tiller grain yield. None had a correlation significantly greater than F2I for either measure of HI, where heritability was large. PF2 is the recommended method for traits with low heritability because of its simplicity and because it had the largest or nearly the largest correlation for each of the yield traits. F2I is the recommended method for traits with larger heritability.Contribution No. 8821 of the U.S. Regional Pasture Research LaboratoryDeceased