华北平原11种植物种子萌发的生物学零点与积温探究

研究分析了华北平原11种植物种子萌发所需要的生物学零度和积温,结果表明:与其原产地年均气温比较,由于长期的适应,各植物的生物学零点和原产地的平均气温存在明显的正相关关系;种子萌发的积温和种子萌发的生物学零度之间存在显著地负相关关系。     

Deformation of uncemented metal acetabular cups following impaction: experimental and finite element study

Predicting failure following the implantation of acetabular cups used in hip replacements is important in ensuring robust component designs. This study has developed 3D explicit dynamics finite element (FE) models to investigate the deformation of press-fit metal cups following insertion in the acetabular cavity. The cup deformation following insertion is clearly influenced by the forces encountered during insertion, the initial position of the cup in the cavity, the support provided by the underlying bone and the geometry of the cup itself. Experimentally validated explicit dynamics FE models were used to allow a physiologically relevant simulation of the impaction of cups, which is encountered in clinical practice, in comparison to previous studies that have used unrealistically high static forces to simulate a static press-fit insertion. Diametrical cup deformations were twice as large when the cup was tilted at 5° with respect to the cavity compared to when the poles of the cup and the cavity were aligned. The introduction of a non-uniform support to the cup increased deformations further by a factor of approximately 2.5. The greatest deformations established in the model were between 80 and 150 μm similar to typical cup–femoral head clearances. Increasing the thickness at the pole of the cup and reducing the cup diameter resulted in significantly smaller deformations being generated. These results suggest that small cup misalignments, which may not be noticeable in a clinical situation, may produce significant deformations after insertion especially when coupled with the non-uniform support found in the pelvis.     

The modelling of interactions between organs and medical tools: a volumetric mass-spring chain algorithm

This paper adds volume deformation capability to the mass-spring chain method using tetrahedral elements in order to obtain more realistic deformations, which occur during the interactions between medical tools and soft tissues. The mass-spring chain method originally does not consider volume information and performs deformation by moving and deforming individual springs of a deformable model. However, most of the applications in computer graphics require volume modelling using tetrahedrons. In the proposed method, the deformation algorithm loops through tetrahedrons and performs deformation based on defined rules similar to those of the original mass-spring chain method. This method can handle not only ordinary deformation applications but also those with topology changes, such as cutting and tearing, as it does not rely on any pre-computed quantities. A method to preserve the volume and the shape of the tetrahedral elements is also developed. In order to speed up the new version of the algorithm, a tetrahedral propagation for deformation is developed. The detailed implementation of the algorithm and the various applications of the organ–surgery tool interactions are presented. The paper also provides the animations of the different models obtained by the proposed method.     

土壤硝化作用的抑制剂调控及其机理

既要保证氮肥在优质高效农业生产中的促进作用,又要保证农业和环境的可持续发展,如何提高氮肥利用率、减轻氮肥污染成了解决问题的关键.从氮素在土壤中的生物化学转化过程入手,通过抑制剂的施用来调控氮素的转化,减缓硝化过程的进行,是解决该问题的一种有效措施.本文从硝化抑制剂的定义、筛选硝化抑制剂的条件、国内外较受关注的硝化抑制剂品种以及硝化抑制机理等几个方面对目前的研究进展进行综述,并提出目前研究中存在的问题及今后的研究方向.     

温度对感染沃尔巴克氏体的松毛虫赤眼蜂种群参数的影响

在16℃、20℃、24℃、28℃和32℃恒温下,观察了温度对感染沃尔巴克氏体的松毛虫赤眼蜂发育、存活和繁殖的影响,组建了相应温度下的实验种群生命表。结果表明,在实验温度范围内,感染沃尔巴克氏体的松毛虫赤眼蜂的发育历期随着温度的升高而逐渐缩短,5个温度下感染沃尔巴克氏体的松毛虫赤眼蜂世代的发育历期分别为23.2、17.8、13.2、11.1和7.8天,世代的发育起点温度和有效积温分别为7.40℃和212.69日·度,内禀增长率(r_m)和净生殖力(R₀)分别介于0.2448～0.4584和28.00～84.03之间。结果提示温度24℃～28℃为繁殖感染沃尔巴克氏体的松毛虫赤眼蜂的理想温度条件。     

腐食酪螨在不同温度和营养条件下生长发育的比较研究

在12.5℃、15℃、20℃、25℃和30℃恒温下,用啤酒酵母粉和玉米粉为饲料,测定了不同温度和饲料条件下腐食酪螨Tyrophagus putrescentiae各个发育阶段和世代的发育历期,获得其在各条件下的发育起点温度和有效积温。结果表明,在本文的实验温度范围内,该螨的发育历期与温度呈负相关,即随着温度的升高发育历期缩短。在各发育阶段不同饲料条件下发育起点温度和有效积温都有所差异。用啤酒酵母粉作饲料时,腐食酪螨的全世代历期为48.04天（12.5℃下）和8.41天（30℃下）,发育起点温度为10.18℃,有效积温为155.44 d·℃; 用玉米粉作饲料时,全世代历期为78.79天（12.5℃下）和10.77天（30℃下）,发育起点温度为10.52℃,有效积温为208.33 d·℃。以成螨体长和体宽为指标,比较了在各温度条件及不同饲料条件对其生长的影响,结果表明不同饲料对螨体大小有显著影响,温度的影响不明显。     

温度对双纹须歧角螟生长发育和繁殖的影响

在室内研究了温度对双纹须歧角螟Trichophysetis cretacea (Butler)生长发育及繁殖的影响。结果表明,在19～31℃范围内,双纹歧角螟的发育速率随着温度的升高而加快;当温度超过31℃时,发育速率减慢。在各虫态中,蛹期的存活受温度变化的影响最大,35℃时蛹全部死亡。19℃、23℃、27℃、31℃和35℃下的世代存活率分别为87.1%、83.0%、85.2%、70.1%和0%。卵、幼虫、预蛹、蛹及从卵至成虫的发育起点温度分别为9.08℃、8.95℃、7.80℃、9.09℃和8.86℃,有效积温分别为62.4、122.0、16.0、108.1和309.1日·度。成虫的寿命随温度的升高而缩短,27℃时成虫的产卵量最高,平均为91.3粒。19℃、23℃、27℃和31℃条件下,实验种群的净生殖率分别为31.0、41.8、46.7、0.8,内禀增长率分别为0.0813、0.1439、0.1710、-0.0094,平均世代周期分别为42.2、26.3、23.1和19.2天。     

Interaction and fusion dynamics between cellular blebs

Membrane blebbing, as a mechanism for cells to regulate their internal pressure and membrane tension, is believed to play important roles in processes such as cell migration, spreading and apoptosis. However, the fundamental question of how different blebs interact with each other during their life cycles remains largely unclear. Here, we report a combined theoretical and experimental investigation to examine how the growth and retraction of a cellular bleb are influenced by neighboring blebs as well as the fusion dynamics between them. Specifically, a boundary integral model was developed to describe the shape evolution of cell membrane during the blebbing/retracting process. We showed that a drop in the intracellular pressure will be induced by the formation of a bleb whose retraction then restores the pressure level. Consequently, the volume that a second bleb can reach was predicted to heavily depend on its initial weakened size and the time lag with respect to the first bleb, all in quantitative agreement with our experimental observations. In addition, it was found that as the strength of membrane-cortex adhesion increases, the possible coalescence of two neighboring blebs changes from smooth fusion to abrupt coalescence and eventually to no fusion at all. Phase diagrams summarizing the dependence of such transition on key physical factors, such as the intracellular pressure and bleb separation, were also obtained.     

Stochastic simulations of nanoparticle internalization through transferrin receptor dependent clathrin-mediated endocytosis

Background

Receptor dependent clathrin-mediated endocytosis (CME) is one of the most important endocytic pathways for the internalization of bioparticles into cells. During CME, the ligand-receptor interactions, development of clathrin-coated pit (CCP) and membrane evolution all act together to drive the internalization of bioparticles. In this work, we develop a stochastic computational model to investigate the CME based on the Metropolis Monte Carlo simulations.