The effects of light quality on the growth of phototrophic bacteria in lakes

The effects of light quality (color) on the ¹⁴CO₂ fixation rates of natural population of photosynthetic sulfur bacteria were tested. The phototrophic bacteria were collected from the sulfide containing waters of 3 stratified lakes. The populations sampled survive in environments where light intensities are very low. Not only are the light intensities low but, due to the light filtering characteristics of the lake water, the light is of specific color. It was determined that the spectral properties of the three lakes differed, hence the quality of light reaching the phototrophic bacteria in each lake differed. It was also observed that only green sulfur bacteria were present in the study lake which transmits mainly red light and both purple and green sulfur bacteria were present in the two study lakes which transmit predominantly green light. Enrichment cultures were set up with phototrophic bacteria from two of the lakes serving as the inocula. Enrichment culture studies and photosynthetic responses of the natural populations indicate that light quality is a major factor in determining the composition of phototrophic bacterial population in some lakes.Non-Common Abbreviations Bchl Bacteriochlorophyll - DPM Disintegrations per minute     

Structure-function relationship in hemoproteins: The role of cytochrome c 3 in the reduction of colloidal sulfur by sulfate-reducing bacteria

Cytochromes c ₃ of different strains of sulfatereducing bacteria have been purified and tested for their capacity to reduce colloidal sulfur to hydrogen sulfide. The results are in good agreement with the activities reported for the whole cells. Cytochrome c ₃ is the sulfur reductase of some strains of sulfate-reducing bacteria such as Desulfovibrio desulfuricans Norway 4 and sulfate-reducing bacterium strain 9974 from which the sulfur reductase activity can be purified with the cytochrome c ₃. In contrast, Desulfovibrio vulgaris Hildenborough cytochrome c ₃ is inhibited by the product of the reaction namely hydrogen sulfide. Chloramphenicol has no effect on the sulfur reductase activity of D. desulfuricans Norway 4 when resting cells grown on lactate-sulfate medium are put in the presence of colloidal sulfur. This shows that the sulfur reductase activity is constitutive and corresponds to the fact that colloidal sulfur grown cells do not contain more cytochrome c ₃ (or another sulfur reductase) than lactate-sulfate-grown cells.     

Exploring Coal Biodesulfurization Potential of a Novel Organic Sulfur Metabolizing Rhodococcus spp. (Eu-32) – A Case Study

Coal is one of the most abundant nonrenewable fossil fuels, in Pakistan. However, in general, the quality of coal is too low to offset the practical, economic, and regulatory barriers to its utilization. High sulfur content comes up as one of the bottlenecks in productive usage of indigenous coal. Biotechnology can emerge as a panacea for upgrading the huge reserves of high sulfur coal. In current study, the sulfur removal potential of Rhodococcus spp. (Eu-32) was investigated using coal from Dukki, Baluchistan, Pakistan. Biodesulfurization process was optimized for various parameters and maximum decrease of 40% and 60% in total and organic sulfur contents, respectively were achieved in 15 days. The Langmuir and Brunauer–Emmett–Teller (BET) surface areas of the biotreated coal were increased by 20 and 16 times, respectively. Scanning electron microscope showed higher tendency of attachment of bacterial cells to the coal particles. Our results revealed that Eu-32 could remove significant amounts of organic sulfur from coal and could be used in the pre-combustion operations with appropriate arrangements.     

Boosting Polysulfide Redox Kinetics by Graphene‐Supported Ni Nanoparticles with Carbon Coating

Lithium–sulfur batteries have attracted extensive attention because of their high energy density. However, their application is still impeded by the inherent sluggish kinetics and solubility of intermediate products (i.e., polysulfides) of the sulfur cathode. Herein, graphene‐supported Ni nanoparticles with a carbon coating are fabricated by directly carbonizing a metal–organic framework/graphene oxide composite, which is then dispersed on a commercial glass fiber membrane to form a separator with electrocatalytic activity. In situ analysis and electrochemical investigation demonstrate that this modified separator can effectively suppress the shuttle effect and regulate the catalytic conversion of intercepted polysulfides, which is also confirmed by density functional theory calculations. It is found that Ni–C sites can chemically interact with polysulfides and stabilize the radical S₃^?? through Ni? S bonds to enable fast dynamic equilibrium with S₆^2?, while Ni nanoparticles reduce the oxidation barrier of Li₂S and accelerate ion/electron transport. As a result, the corresponding lithium–sulfur battery shows a high cycle stability (88% capacity retention over 100 cycles) even with a high sulfur mass loading of 8 mg cm^?2 and lean electrolyte (6.25 µ L mg^?1). Surprisingly, benefitting from the improved kinetics, the battery can work well at ?50 °C, which is rarely achieved by conventional Li–S batteries.     

Ultrafine Co3Se4 Nanoparticles in Nitrogen‐Doped 3D Carbon Matrix for High‐Stable and Long‐Cycle‐Life Lithium Sulfur Batteries

Lithium–sulfur batteries are a promising high energy output solution for substitution of traditional lithium ion batteries. In recent times research in this field has stepped into the exploration of practical applications. However, their applications are impeded by cycling stability and short life‐span mainly due to the notorious polysulfide shuttle effect. In this work, a multifunctional sulfur host fabricated by grafting highly conductive Co₃Se₄ nanoparticles onto the surface of an N‐doped 3D carbon matrix to inhibit the polysulfide shuttle and improve the sulfur utilization is proposed. By regulating the carbon matrix and the Co₃Se₄ distribution, N‐CN‐750@Co₃Se₄‐0.1 m with abundant polar sites is experimentally and theoretically shown to be a good LiPSs absorbent and a sulfur conversion accelerator. The S/N‐CN‐750@Co₃Se₄‐0.1 m cathode shows excellent sulfur utilization, rate performance, and cyclic durability. A prolonged cycling test of the as‐fabricated S/N‐CN‐750@Co₃Se₄‐0.1 m cathode is carried out at 0.2 C for more than 5 months which delivers a high initial capacity of 1150.3 mAh g^?1 and retains 531.0 mAh g^?1 after 800 cycles with an ultralow capacity reduction of 0.067% per cycle, maintaining Coulombic efficiency of more than 99.3%. The reaction details are characterized and analyzed by ex situ measurements. This work highly emphasizes the potential capabilities of transition‐metal selenides in lithium–sulfur batteries.     

Revisiting the Role of Conductivity and Polarity of Host Materials for Long‐Life Lithium–Sulfur Battery

Despite their high theoretical energy density and low cost, lithium–sulfur batteries (LSBs) suffer from poor cycle life and low energy efficiency owing to the polysulfides shuttle and the electronic insulating nature of sulfur. Conductivity and polarity are two critical parameters for the search of optimal sulfur host materials. However, their role in immobilizing polysulfides and enhancing redox kinetics for long‐life LSBs are not fully understood. This work has conducted an evaluation on the role of polarity over conductivity by using a polar but nonconductive platelet ordered mesoporous silica (pOMS) and its replica platelet ordered mesoporous carbon (pOMC), which is conductive but nonpolar. It is found that the polar pOMS/S cathode with a sulfur mass fraction of 80 wt% demonstrates outstanding long‐term cycle stability for 2000 cycles even at a high current density of 2C. Furthermore, the pOMS/S cathode with a high sulfur loading of 6.5 mg cm^?2 illustrates high areal and volumetric capacities with high capacity retention. Complementary physical and electrochemical probes clearly show that surface polarity and structure are more dominant factors for sulfur utilization efficiency and long‐life, while the conductivity can be compensated by the conductive agent involved as a required electrode material during electrode preparation. The present findings shed new light on the design principles of sulfur hosts towards long‐life and highly efficient LSBs.     

New Lithium Salt Forms Interphases Suppressing Both Li Dendrite and Polysulfide Shuttling

Lithium–sulfur batteries (LSBs) are considered promising candidates for the next‐generation energy‐storage systems due to their high theoretical capacity and prevalent abundance of sulfur. Their reversible operation, however, encounters challenges from both the anode, where dendritic and dead Li‐metal form, and the cathode, where polysulfides dissolve and become parasitic shuttles. Both issues arise from the imperfection of interphases between electrolyte and electrode. Herein, a new lithium salt based on an imide anion with fluorination and unsaturation in its structure is reported, whose interphasial chemistries resolve these issues simultaneously. Lithium 1, 1, 2, 2, 3, 3‐hexafluoropropane‐1, 3‐disulfonimide (LiHFDF) forms highly fluorinated interphases at both anode and cathode surfaces, which effectively suppress formation of Li‐dendrites and dissolution/shuttling of polysulfides, and significantly improves the electrochemical reversibility of LSBs. In a broader context, this new Li salt offers a new perspective for diversified beyond Li‐ion chemistries that rely on a Li‐metal anode and active cathode materials.     

外源硫对镉胁迫下马齿苋光合性状和矿质元素吸收的影响

从光合反应系统揭示外源硫(S)诱导马齿苋镉(Cd)耐受性的生理机制,为外源S缓解重金属毒害提供理论依据.采用营养液培养,研究外源S供体(NH4)2SO4对100 mg/L Cd胁迫下马齿苋叶片光合色素、光合特性、叶绿素荧光参数和矿质营养元素的影响.结果表明,Cd胁迫可显著降低马齿苋叶片中叶绿素a和叶绿素b含量;净光合速率、蒸腾速率、气孔导度均显著降低,而胞间二氧化碳浓度上升,表明非气孔因素是Cd胁迫诱导马齿苋光合抑制的主要因素;同时,PSⅡ实际光化学效率(ФPSII)、电子传递效率(J)、化学猝灭系数(qP)显著下降,而非化学猝灭系数(qN)显著上升,表明Cd胁迫影响马齿苋PSⅡ反应系统的正常运行.外施400 mg/L(NH4)2SO4显著提高马齿苋叶片叶绿素a含量、叶绿素b含量和叶绿素a/b比值,增强马齿苋叶片光合作用和PSⅡ原初光化学反应量子效率.对5种与光反应系统密切相关的矿质元素含量进行分析发现,Cd处理显著增加马齿苋叶片中的Ca和Fe含量,显著抑制马齿苋对Mg、Mn和Cu的吸收.Cd胁迫下马齿苋叶片的变黄与Mg、Mn的亏缺有关,而与Fe缺乏无关;添加外源S可显著提升马齿苋叶片中Ca、Mg、Fe、Cu和Mn含量,从而增强Cd胁迫下马齿苋叶片的PSII反应系统功能.     

转HSSP基因大豆的分子检测和遗传稳定性分析

HSSP是用大豆密码子改造的10 kD玉米醇溶蛋白基因。在前期研究中,从获得的转基因大豆中筛选到1份单拷贝转基因材料GSDH5。该研究采用染色体步移法获取转基因大豆GSDH5的T-DNA插入位点的左边界旁侧序列,对获得的左边界旁侧序列进行分析,设计特异性引物,建立转基因大豆GSDH5特异性检测方法;采用Real-time PCR检测外源基因在转基因大豆不同组织部位(根、茎、叶、花和种子)中的表达量,采用RT-PCR和Western blot检测外源基因在转录和翻译水平上的遗传稳定性,并对转基因大豆GSDH5中的粗蛋白、含硫氨基酸含量及主要农艺性状进行测定分析,为培育高含硫氨基酸转基因大豆新品种奠定基础。结果表明:(1)分子鉴定显示,外源基因HSSP和筛选标记基因Bar成功整合到受体大豆‘东农50’基因组中,且以单拷贝的形式整合到大豆基因组中。(2)HSSP基因成功插入到大豆基因组1号染色体非编码区52 873 883 bp处。(3)HSSP基因在转基因大豆GSDH5的种子中特异性表达,且在T_2～T_4代转基因大豆中能够稳定遗传并表达。(4)‘东农50’粗蛋白含量在41.53%～43.32%之间,GSDH5粗蛋白含量在40.18%～43.03%之间,两者相比无显著差异;GSDH5种子中硫氨基酸占种子干样的比例为1.35%,占种子蛋白的比例为3.14%,与转基因受体品种‘东农50’相比,占比显著升高,分别增加了11%和16%。(5)转基因大豆GSDH5植株与受体品种‘东农50’在单株荚数、百粒重、株高、结荚习性、花色、叶形等方面均无显著差异,证明HSSP基因的插入对大豆植株的生长发育无不良影响。研究认为,转基因大豆GSDH5材料具备进一步培育成高含硫氨基酸大豆新品种的潜力。     

嫁接诱导大豆低镉富集性状及遗传稳定性

通过野外小区实验,从8个大豆品种中筛选出2个低镉富集品种作为砧木,2个高镉富集品种作为接穗植物,研究嫁接当代以及接穗子代镉富集性状的变化,探明嫁接诱导镉富集性状变异的机制及其遗传稳定性。结果表明:大豆的镉富集性状表现出显著的品种间差异,以低镉富集品种(铁丰29和东鲜1号)作砧木,可以使接穗大豆植株(青仁黑1号和中黄38)地上部分镉含量降低50%~70%;高通量测序和qRT-PCR分析显示,嫁接诱导了相关硫代谢基因的差异表达,与自根植株相比,嫁接植株的APX2、PAPRa、SAM1a和ATPs基因表达水平均显著下调,分别达72.53%、67.62%、42.37%和75.78%,APK4表达量则显著上调2.83倍;以阻控效果最好的青仁黑1号-东鲜1号为例,接穗子代遗传了接穗当代的低镉富集性状,对照亲本,子代籽粒镉含量的降低率仍有30%~50%。研究证明:嫁接可以通过调控含硫化合物的合成与代谢,影响作物地上部分的Cd富集性状,且这种性状可以在子代中稳定遗传。