杂交兰花色花香生物合成途径的转录组分析

该研究以杂交兰(Cymbidium hybrid)不同花色花香品种‘玉凤’(K18,黄色)和‘福韵丹霞’(K24,紫红色)为材料,采用RNA-Seq技术获得杂交兰不同花期的花朵转录组数据,分析杂交兰不同时期花色/花香相关基因的表达变化,探讨杂交兰花色花香形成的分子机理,为杂交的定向改良和新品种选育提供依据。结果表明:(1)K18和K24分别获得11914和6793个差异表达基因;KEGG注释显示,有58个差异基因与花色花香合成相关;进一步分析发现,类黄酮是K18和K24的主要花色素,其合成基因在小花蕾期显著上调,其中K18通过查尔酮异构酶基因(CHI)、类黄酮-3′,5′羟化酶基因(F3′5′H)和黄酮醇合酶基因(FLS)途径生成黄酮醇,K24则通过花青素合成酶基因(ANS)途径生成花青素。(2)qRT-PCR验证表明,萜类骨架基因羟甲基戊二酰辅酶基因(HMGS)、羟基-3-甲基戊二酰辅酶A还原酶基因(HMGR2)和甲羟戊酸-5-焦磷酸合酶基因(MVD)等的表达量均在K18盛花期最高,同时6个下游的萜烯合酶(TPS)基因在K18中表达量比K24上调100倍以上。(3)定量分析表明,K24、K18中的花色素苷总含量分别为608.74、122.28μg·g-1,K18花色苷含量仅为K24的20%;K24花中色素物质主要成分为矢车菊素苷,使其花色呈红色;K18中飞燕草素苷含量相对较高(花色为黄色)。研究推测,ANS基因的较高表达可能是K24花瓣中花色苷含量高于K18的原因之一,K18通过CHI、F3′5′H、FLS途径积累了大量黄酮醇而不是花青素,从而影响了花朵颜色的决定。     

Gene flow across a hybrid zone maintained by a weak heterogametic incompatibility and positive selection of incompatible alleles

Hybridization between incipient species is more likely to produce sterile or inviable F₁ offspring in the heterogametic (XY or ZW) sex than in the homogametic (XX or ZZ) sex, a phenomenon known as Haldane's rule. Population dynamics associated with Haldane's rule may play an important role in early speciation of sexually reproducing organisms. The dynamics of the hybrid zone maintained by incomplete hybrid inferiority (sterility/inviability) in the heterogametic sex (a ‘weak’ Haldane's rule) caused by a Bateson–Dobzhansky–Muller incompatibility was modelled. The influences and interplays of the strengths of incompatibility, dispersal, density‐dependent regulation (DDR) and local adaptation of incompatible alleles in a scenario of short‐range dispersal (the stepping‐stone model) were examined. It was found that a partial heterogametic hybrid incompatibility could efficiently impede gene flow and maintain characteristic clinal noncoincidence and discordance of alleles. Density‐dependent regulation appears to be an important factor affecting hybrid zone dynamics: it can effectively skew the effects of the partial incompatibility and dispersal as measured by effective dispersal, clinal structures and density depression. Unexpectedly, local adaptation of incompatible alleles in the parental populations, which would be critical for the establishment of the incompatibility, exerts little effect on hybrid zone dynamics. These results strongly support the plausibility of the adaptive origin of hybrid incompatibility and ecological speciation: an adaptive mutation, if it confers a marginal fitness advantage in the local population and happens to cause epistatic inferiority in hybrids, could efficiently drive further genetic divergence that may result in the gene becoming an evolutionary hotspot.     

Hybridization and speciation

Hybridization has many and varied impacts on the process of speciation. Hybridization may slow or reverse differentiation by allowing gene flow and recombination. It may accelerate speciation via adaptive introgression or cause near‐instantaneous speciation by allopolyploidization. It may have multiple effects at different stages and in different spatial contexts within a single speciation event. We offer a perspective on the context and evolutionary significance of hybridization during speciation, highlighting issues of current interest and debate. In secondary contact zones, it is uncertain if barriers to gene flow will be strengthened or broken down due to recombination and gene flow. Theory and empirical evidence suggest the latter is more likely, except within and around strongly selected genomic regions. Hybridization may contribute to speciation through the formation of new hybrid taxa, whereas introgression of a few loci may promote adaptive divergence and so facilitate speciation. Gene regulatory networks, epigenetic effects and the evolution of selfish genetic material in the genome suggest that the Dobzhansky–Muller model of hybrid incompatibilities requires a broader interpretation. Finally, although the incidence of reinforcement remains uncertain, this and other interactions in areas of sympatry may have knock‐on effects on speciation both within and outside regions of hybridization.     

Introgressive hybridization of Senecio hercynicus and S. ovatus (Compositae,Senecioneae) along an altitudinal gradient in Harz National Park (Germany)

Introgressive hybridization of Senecio hercynicus and S. ovatus (Compositae, Senecioneae) was studied in a hybrid zone on the southern slopes of Mt Brocken (Harz Mountains, Germany). A total of 415 plants representing 10 stands along an altitudinal gradient were investigated using multivariate statistical analyses of morphological characters and molecular markers (random amplified polymorphic DNA[RAPD]). Both types of traits detected pure S. hercynicus stands on the summit plateau, pure S. ovatus stands at the lowest elevations, and hybrid swarms at intermediate elevations. While morphological and molecular patterns coincided, some individuals in hybrid stands combined morphological patterns typical of S. ovatus with RAPD patterns typical of S. hercynicus, and vice versa. In general, introgression was symmetrical within stands, though one stand combined S. ovatus characters with the glandular hair typical for S. hercynicus, and two stands combined a S. hercynicus typical RAPD genotype with morphological characters shifted towards S. ovatus. Because pure stands of S. hercynicus occurred only on the summit plateau of Mt Brocken, and markers typical for S. ovatus were detectable in stands up to 1040 m a.s.l., future fusion or assimilation of the rare form, S. hercynicus, by the more widespread S. ovatus appears possible at Mt Brocken.     

Synthesis and Evaluation of Pyrrole Polyamide- 2′-Deoxyguanosine 5′-Phosphate Hybrid

Pyrrole polyamide-2′-deoxyguanosine 5′-phosphate hybrid (Hybrid 4) was synthesized and evaluated in terms of the inhibition of mouse mammary carcinoma FM3A cell growth. Hybrid 4 was found to exhibit dose-dependent inhibition of cell growth.     

Nitrification in hybrid bioreactors treating simulated domestic wastewater

Aim

To provide deeper insights into nitrification process within aerobic bioreactors containing supplemental physical support media (hybrid bioreactors).

Methods and Results

Three bench‐scale hybrid bioreactors with different media size and one control bioreactor were operated to assess how biofilm integrity influences microbial community conditions and bioreactor performance. The systems were operated initially at a 5‐day hydraulic retention time (HRT), and all reactors displayed efficient nitrification and chemical oxygen demand (COD) removal (>95%). However, when HRT was reduced to 2·5 days, COD removal rates remained high, but nitrification efficiencies declined in all reactors after 19 days. To explain reduced performance, nitrifying bacterial communities (ammonia‐oxidizing bacteria, AOB; nitrite‐oxidizing bacteria, NOB) were examined in the liquid phase and also on the beads using qPCR, FISH and DGGE. Overall, the presence of the beads in a reactor promoted bacterial abundances and diversity, but as bead size was increased, biofilms with active coupled AOB–NOB activity were less apparent, resulting in incomplete nitrification.

Conclusions

Hybrid bioreactors have potential to sustain effective nitrification at low HRTs, but support media size and configuration type must be optimized to ensure coupled AOB and NOB activity in nitrification.

Significance and Impact of the Study

This study shows that AOB and NOB coupling must be accomplished to minimize nitrification failure.     

A Novel High‐Energy Hybrid Supercapacitor with an Anatase TiO2–Reduced Graphene Oxide Anode and an Activated Carbon Cathode

A hybrid supercapacitor with high energy and power densities is reported. It comprises a composite anode of anatase TiO₂ and reduced graphene oxide and an activated carbon cathode in a non‐aqueous electrolyte. While intercalation compounds can provide high energy typically at the expense of power, the anatase TiO₂ nanoparticles are able to sustain both high energy and power in the hybrid supercapacitor. At a voltage range from 1.0 to 3.0 V, 42 W h kg^?1 of energy is achieved at 800 W kg^?1. Even at a 4‐s charge/discharge rate, an energy density as high as 8.9 W h kg^?1 can be retained. The high energy and power of this hybrid supercapacitor bridges the gap between conventional batteries with high energy and low power and supercapacitors with high power and low energy.     

Quantum Dot Based Heterostructures for Unassisted Photoelectrochemical Hydrogen Generation

TiO₂ hollow nanowires (HNWs) and nanoparticles (NPs) constitute promising architectures for QDs sensitized photoanodes for H₂ generation. We sensitize these structures with CdS/CdSe quantum dots by two different methods (chemical bath deposition, CBD and succesive ionic layer adsorption and reaction, SILAR) and evaluate the performance of these photoelectrodes. Remarkable photocurrents of 4 mA·cm and 8 mA·cm^?2 and hydrogen generation rates of 40 ml·cm^?2·day^?1 and 80 ml·cm^?2·day^?1 have been obtained in a three electrode configuration with sacrificial hole scavengers (Na₂S and Na₂SO₃), for HNWs and NPs respectively, which is confirmed through gas analysis. More importantly, autonomous generation of H₂ (20 ml·cm^?2·day^?1 corresponding to 2 mA·cm^?2 photocurrent) is obtained in a two electrode configuration at short circuit under 100 mW·cm^?2 illumination, clearly showing that these photoanodes can produce hydrogen without the assistance of any external bias. To the best of the authors' knowledge, this is the highest unbiased solar H₂ generation rate reported for these of QDs based heterostructures. Impedance spectroscopy measurements show similar electron density of trap states below the TiO₂ conduction band while the recombination resistance was higher for HNWs, consistently with the much lower surface area compared to NPs. However, the conductivity of both structures is similar, in spite of the one dimensional character of HNWs, which leaves some room for improvement of these nanowired structures. The effect of the QDs deposition method is also evaluated. Both structures show remarkable stability without any appreciable photocurrent loss after 0.5 hour of operation. The findings of this study constitute a relevant step towards the feasibility of hydrogen generation with wide bandgap semiconductors/quantum dots based heterostructures.     

Sandwich‐Type Microporous Carbon Nanosheets for Enhanced Supercapacitor Performance

Sandwich‐type microporous hybrid carbon nanosheets (MHCN) consisting of graphene and microporous carbon layers are fabricated using graphene oxides as shape‐directing agent and the in‐situ formed poly(benzoxazine‐co‐resol) as carbon precursor. The reaction and condensation can be readily completed within 45 min. The obtained MHCN has a high density of accessible micropores that reside in the porous carbon with controlled thickness (e.g., 17 nm), a high surface area of 1293 m² g^?1 and a narrow pore size distribution of ca. 0.8 nm. These features allow an easy access, a rapid diffusion and a high loading of charged ions, which outperform the diffusion rate in bulk carbon and are highly efficient for an increased double‐layer capacitance. Meanwhile, the uniform graphene percolating in the interconnected MHCN forms the bulk conductive networks and their electrical conductivity can be up to 120 S m^?1 at the graphene percolation threshold of 2.0 wt.%. The best‐practice two‐electrode test demonstrates that the MHCN show a gravimetric capacitance of high up to 103 F g^?1 and a good energy density of ca. 22.4 Wh kg^?1 at a high current density of 5 A g^?1. These advanced properties ensure the MHCN a great promise as an electrode material for supercapacitors.