Sequential interval micro-droplet loading in closed hemi-straw carrier system: A convenient and efficient method for ultra-rapid cryopreservation in extreme oligozoospermia

Cryopreservation of human spermatozoa with low concentration while maintaining adequate post-thawing motility remains a major challenge for male fertility preservation. A convenient and efficient ultra-rapid freezing method for small amounts of human spermatozoa in a closed Hemi-Straw carrier system (CHS) was developed. Spermatozoa from 60 healthy men were involved in a parameter refining test and another 15 extreme oligozoospermic specimens were assigned to a verification test. A commercialized sperm freezing medium, Quinn's Advantage® Sperm Freeze medium (glycerol and sucrose as the cryoprotective agent) was used in the study. The results showed that the highest recovery rates would be obtained via the method of 2 μl single droplet sequential interval loading, by placing the straw at 1 cm above the liquid nitrogen (LN₂) surface for 60 s during freezing and 2 cm above the LN₂ for 2 min during thawing. This method was applied in cryopreservation for the normozoospermic specimens and compared with a conventional slow freezing method. The results were better than those in the control group in the total motility recovery rate (77.8 ± 11.2% vs 56.6 ± 11.9%, P < 0.01), progressive motility recovery rate (77.6 ± 13.2% vs 47.7 ± 14.6%, P < 0.01), 24 h survival index (60.9 ± 13.4% vs 42.1 ± 14.1%, P < 0.01) and the sperm DNA fragment index (4.2 ± 3.7% vs 5.8 ± 3.7%, P = 0.126). This method was applied to the oligozoospermic specimens. Motile spermatozoa could be found in 12 of 15 cases in the ultra-rapid freezing group, while only in 7 cases in control group. The results indicated that this freezing method was simple, convenient and bio-safe for cryopreservation of severe oligozoospermic specimens.     

Optimization of pancreatic lipase inhibition by Cudrania tricuspidata fruits using response surface methodology

The fruits of Cudrania tricuspidata (Carr.) Bur. (Moraceae) significantly inhibited pancreatic lipase, which plays a key role in fat absorption. Optimization of extraction conditions with minimum pancreatic lipase activity and maximum yield was determined using response surface methodology with three-level-three-factor Box–Behnken design (BBD). Regression analysis showed a good fit of the experimental data and the optimal condition was obtained as ethanol concentration, 74.5%; temperature 61.9 °C and extraction time, 13.5 h. The pancreatic lipase activity and extraction yield under optimal conditions were found to be 65.5% and 54.0%, respectively, which were well matched with the predicted value of 65.8% and 47.1%. Further fractionation of C. tricuspidata extract resulted in the isolation of compound 1, which was identified as 5,7,4′-trihydroxy-6,8-diprenylisoflavone. It inhibited pancreatic lipase activity with IC₅₀ value of 65.0 μM. HPLC analysis suggested positive correlation between pancreatic lipase inhibition and 5,7,4′-trihydroxy-6,8-diprenylisoflavone of C. tricuspidata fruits.     

An actuated dissipative spring-mass walking model: Predicting human-like ground reaction forces and the effects of model parameters

Simple models are widely used to understand the mechanics of human walking. The optimization-based minimal biped model and spring-loaded-inverted-pendulum (SLIP) model are two popular models that can achieve human-like walking patterns. However, ground reaction forces (GRF) from these two models still deviate from experimental data. In this paper, we proposed an actuated dissipative spring-mass model by integrating these two models to realize more human-like GRF patterns. We first explored the function of stiffness, damping, and weights of both energy cost and force cost in the objective function and found that these parameters have distinctly different influences on the optimized gait and GRF profiles. The stiffness and objective weight affect the number and size of peaks in the vertical GRF and stance time. The damping changes the relative size of the peaks but has little influence on stance time. Based on these observations, these parameters were manually tuned at three different speeds to approach experimentally measured vertical GRF and the highest correlation coefficient can reach 0.983. These results indicate that the stiffness, damping, and proper objective functions are all important factors in achieving human-like motion for this simple walking model. These findings can facilitate the understanding of human walking dynamics and may be applied in future biped models.     

Metabolic shift analysis at high cell densities

Abstract: In high cell density cultures it is virtually inevitable that the environment to which the cells are exposed is heterogeneous. Thus, with suspended cultures, individual cells are subject to temporal changes in their environment whereas with aggregated or immobilized cells, the culture can be considered as being formed by a number of subpopulations, each with its own environmental characteristics. In addition, in a high cell density environment, high concentrations of end products may negatively influence the growth rate. This may result in the selection of organisms with an altered metabolic behaviour or with a decreased sensitivity to the adverse effects of the product. We discuss the consequences of this heterogeneity with regard to carbon source metabolism in view of the ability of many bacterial species to adapt to environmental conditions. Selection of variant organisms was found to occur with Clostridium butyricum when grown for a prolonged time in a medium containing approx. I-50 mM glucose. In contrast to the original strain, these variants could sustain a high maximal growth rate in the presence of butyric acid. In addition, they had acquired the capacity to spontaneously form aggregates and were able to carry out a completely solventogenic fermentation. Heterogeneous metabolic activity in aggregated cells is demonstrated with cultures of Lactobacillus laevolacticus , an aggregateforming lactic acid bacterium that converts glucose completely to o-lactate. By using microelectrodes, we show that the fraction of metabolically active cells decreases with increasing aggregate size: in larger aggregates steep pH gradients occur with the effect that only the outer layer of the aggregate is metabolically active, i.e. contributes to lactic acid formation, whereas with smaller aggregates all cells remain active. As a result, the net specific lactic acid production rate of the population as a whole is not invariably increased with increased aggregate size.     

Logistic曲线参数的一个最佳估计方法

本文提出用O．628优选法和SAS/STAT软件NLIN模块中的DUD法,对Logistic曲线中的参数k,a和b可得到最佳估计。     

How did glycogen structure evolve to satisfy the requirement for rapid mobilization of glucose? A problem of physical constraints in structure building

Optimization of molecular design in cellular metabolism is a necessary condition for guaranteeing a good structure–function relationship. We have studied this feature in the design of glycogen by means of the mathematical model previously presented that describes glycogen structure and its optimization function [Meléndez-Hevia et al. (1993), Biochem J 295: 477–483]. Our results demonstrate that the structure of cellular glycogen is in good agreement with these principles. Because the stored glucose in glycogen must be ready to be used at any phase of its synthesis or degradation, the full optimization of glycogen structure must also imply the optimization of every intermediate stage in its formation. This case can be viewed as a molecular instance of the eye problem, a classical paradigm of natural selection which states that every step in the evolutionary formation of a functional structure must be functional. The glycogen molecule has a highly optimized structure for its metabolic function, but the optimization of the full molecule has meaning and can be understood only by taking into account the optimization of each intermediate stage in its formation. Received: 23 October 1996 / Accepted: 21 April 1997     

Identification of 4-anilino-6-aminoquinazoline derivatives as potential MERS-CoV inhibitors

New therapies for treating coronaviruses are urgently needed. A series of 4-anilino-6-aminoquinazoline derivatives were synthesized and evaluated to show high anti-MERS-CoV activities. N⁴-(3-Chloro-4-fluorophenyl)-N⁶-(3-methoxybenzyl)quinazoline-4,6-diamine (1) has been identified in a random screen as a hit compound for inhibiting MERS-CoV infection. Throughout optimization process, compound 20 was found to exhibit high inhibitory effect (IC₅₀ = 0.157 μM, SI = 25) with no cytotoxicity and moderate in vivo PK properties.     

Developing and implementing a multi-modality imaging optimization study in paediatric radiology: Experience and recommendations from an IAEA coordinated research project

Optimization of imaging examinations is a key requirement of both the International and European Basic Safety Standards, and the focus of much international activity. Although methodologies are well established in principle, there continues to be a variety of practical issues both in collecting and interpreting dose and image quality data and in making successful interventions to optimize exposures.A Coordinated Research Project, involving institutes from ten different countries, was established by the IAEA to assess the efficacy of recommended optimization methodologies in the field of paediatric radiology and to derive practical guidance on their implementation. The steps followed in this process were identification of the imaging process to be investigated (abdomen and chest x-rays, micturating cysto-urethrograms, and brain & thorax CT scans); collection of dose and image quality data; evaluation and comparison of the data between institutes and to standards; identification and implementation of interventions for optimization; and re-evaluation of dose and image quality parameters.The project succeeded both in achieving effective interventions for optimization of specific imaging tasks in individual institutes and in identifying key issues with potential to handicap this process. The main area in which problems were encountered was in the collation of reliable dose and image quality data. The reasons for this were explored and a series of recommendations have been made, summarized into ‘ten practical tips’ for optimization to assist institutes, particularly those in the early stages of addressing optimization issues.     

Immobilized Enzyme Three-Phase Reactors for Oxidation of Cephalosporin C

The enzymatic oxidation of Cephalosporin C (CEPHC) was catalyzed by D-aminoacid oxidase, from the red yeast Trigonopsis variabilis, immobilized on Duolite A365. The study was performed in two different three phase bioreactors, gas-liquid-solid (immobilized enzyme): the fluidized-bed batch reactor, fed continuously with oxygen and discontinuously with CEPHC, and the UF-membrane reactor continuously fed with both substrates. Only the first reactor allowed significant product yield (>70%) while the second was a very useful tool for laboratory investigation of both bioconversion kinetics and enzyme stability.

Optimum reaction temperature was 15d`C for the control of CEPHC spontaneous degradation (roughly 15% in 30 h), and enzyme deactivation (half-life greater than 30 h). Immobilization improved (one order of magnitude longer half-life) enzyme resistance to mechanical stresses induced by liquid stirring and gas bubbling. Roughly 0.04g of CEPHC was adsorbed per gram of enzyme carrier. The limiting step in oxygen transfer was the gas to liquid transport. In order to attain kinetic control of the bioconversion the mildest conditions were atmospheric gas pressure and oxygen flow rate equal to 2 × 10 ²NmL/s per mL of liquid phase.     

Tissue Aspiration and Inverse Finite Element Characterisation of Soft Tissues

In this work we examined the determination of soft tissue parameters via tissue aspiration experiments and inverse finite element characterisation. An aspiration tube was put against the target tissue. The deformation of the tissue inside the tube caused by weak suction was tracked with a video based system. A strain energy function was employed to model the elastic behaviour of soft tissue and viscoelasticity was accounted for by means of a quasi-linear viscoelastic formulation. Friction between the aspiration tube and the aspirated tissue was included in the model. Based on the assumed material model, an optimal set of material parameters was found, in order to best fit the experimental data obtained from ex-vivo experiments on pig kidney cortex. The inverse method resulted in robust determination of the unknown material parameters.