声聚焦层析增强的三维微波热声成像

本文提出了一种提高微波热声断层成像层析能力的方法和装置.基于热声成像原理和声聚焦理论,搭建了由超短脉冲微波源、384阵元环形探测器、声聚焦透镜、384-64通道采集切换系统、精密扫描位移平台构成的微波热声三维成像系统,并实现了模拟样品的断层成像.实验结果表明该系统能够实现亚毫米级分辨率的热声成像,通过声聚焦方法成倍地提高了其层析分辨率.这对推动微波热声CT技术走向临床具有重要的意义.     

Micro-finite element simulation of trabecular-bone post-yield behaviour – effects of material model,element size and type

Micro-finite element (micro-FE) analysis became a standard tool for the evaluation of trabecular bone mechanical properties. The accuracy of micro-FE models for linear analyses is well established. However, the accuracy of recently developed nonlinear micro-FE models for simulations of trabecular bone failure is not known. In this study, a trabecular bone specimen was compressed beyond the apparent yield point. The experiment was simulated using different micro-FE meshes with different element sizes and types, and material models based on cortical bone. The results from the simulations were compared with experimental results to study the effects of the different element and material models. It was found that a decrease in element size from 80 to 40 μm had little effect on predicted post-yield behaviour. Element type and material model had significant effects. Nevertheless, none of the established material models for cortical bone were able to predict the typical descent in the load-displacement curve seen during compression of trabecular bone.     

An anatomical subject-specific FE-model for hip fracture load prediction

In order to reduce the socio-economic burden induced by osteoporotic hip fractures, finite element models have been evaluated as an additional diagnostic tool for fracture prediction. For a future clinical application, the challenge is to reach the best compromise between model relevance and computing time. Based on this consideration, the current study focused on the development and validation of a subject-specific FE-model using an original parameterised generic model and a specific personalization method. A total of 39 human femurs were tested to failure under a quasi-static compression in stance configuration. The corresponding FE-models were generated and for each specimen the numerical fracture load (F _FEM) was compared with the experimental value (F _EXP), resulting in a significant correlation (F _EXP = 1.006 F _FEM with r ² = 0.87 and SEE = 1220 N, p < 0.05) obtained with a reasonable computing time (30 mn). Further in vivo study should confirm the ability of this FE-model to improve the fracture risk prediction.     

A semi-automated method for hexahedral mesh construction of human vertebrae from CT scans

Generation of finite element (FE) meshes of vertebrae from computed tomography (CT) scans is labour intensive due to their geometric complexity. As such, techniques that simplify creation of meshes of vertebrae are needed to make FE analysis feasible for large studies and clinical applications. Techniques to obtain a geometric representation of bone contours from CT scans of vertebrae and construct a hexahedral mesh from the contours were developed. An automated edge detection technique was developed to identify surface contours of the vertebrae, followed by atlas based B-spline curve fitting to construct curves from the edge points. The method was automatic and robust to missing data, with a controllable degree of smoothing and interpolation. Parametric mapping was then used to generate nodes for each CT slice, which were connected between slices to obtain a hexahedral mesh. This method could be adapted for modelling a variety of orthopaedic structures.     

Macular pigment and macular volume in eyes of patients with cystic fibrosis

Abstract

Background. Because patients with cystic fibrosis (CF) are living longer, chronic malabsorption of carotenoids associated with CF resulting in decreased macular pigment (MP) may affect macular long-term health in later-life pathology. This study compared the macular pigment optical density (MPOD) and corresponding central macular volume (MV) of adult CF subjects and age-matched normal controls subjects to determine whether chronic malabsorption associated with CF could adversely affect macular photoreceptor anatomy. Objective. Our aim was to compare MPOD with measurements of central MV in CF patients with age-matched controls. Design. In nine adult CF patients (ages: 29–46) without a history of carotenoid supplementation or known retinal or optic nerve disease MPOD and MV were measured by heterochromatic flicker photometry (HFP) and optical coherence tomography (OCT), respectively, and compared to results obtained from 14 age-matched controls. Results. MPOD was significantly reduced at 15’ and 30’ eccentricities in CF subjects compared to normal subjects (mean difference ?0.21 at 15’, ?0.25 at 30’, p < 0.005). No significant difference, in MV noted at any of the eccentricities tested between CF and normal subjects (CF: normal MV ratios ranged from 0.94 to 1.1 for all eccentricities with p > 0.1 at all eccentricities). Best corrected vision acuity and fundus examination were normal in all subjects. Conclusions. Unsupplemented CF patients have markedly lower levels of macular carotenoids (e.g., lutein and zeaxanthin), but well-maintained visual function and no significant reductions in central MV primarily composed of macular photoreceptors. Future studies are needed to determine whether the lifelong decrease in protective central retinal carotenoids predisposes CF patients to later-life retinal pathology.     

Catabolic and anabolic periarticular bone changes in patients with rheumatoid arthritis: a computed tomography study on the role of age,disease duration and bone markers

Introduction

The aim of this study was to determine the factors, including markers of bone resorption and bone formation, which determine catabolic and anabolic periarticular bone changes in patients with rheumatoid arthritis (RA).

Methods

Forty RA patients received high-resolution peripheral quantitative computed tomography (HR-pQCT) analysis of the metacarpophalangeal joints II and III of the dominantly affected hand at two sequential time points (baseline, one year follow-up). Erosion counts and scores as well as osteophyte counts and scores were recorded. Simultaneously, serum markers of bone resorption (C-terminal telopeptide of type I collagen (CTX I), tartrate-resistant acid phosphatase 5b (TRAP5b)), bone formation (bone alkaline phosphatase (BAP), osteocalcin (OC)) and calcium homeostasis (parathyroid hormone (PTH), 25-hydroxyvitamin D3 (Vit D)) were assessed. Bone biomarkers were correlated to imaging data by partial correlation adjusting for various demographic and disease-specific parameters. Additionally, imaging data were analyzed by mixed linear model regression.

Results

Partial correlation analysis showed that TRAP5b levels correlate significantly with bone erosions, whereas BAP levels correlate with osteophytes at both time points. In the mixed linear model with erosions as the dependent variable, disease duration (P <0.001) was the key determinant for these catabolic bone changes. In contrast, BAP (P = 0.001) as well as age (P = 0.018), but not disease duration (P = 0.762), were the main determinants for the anabolic changes (osteophytes) of the periarticular bone in patients with RA.

Conclusions

This study shows that structural bone changes assessed with HR-pQCT are accompanied by alterations in systemic markers of bone resorption and bone formation. Besides, it can be shown that bone erosions in RA patients depend on disease duration, whereas osteophytes are associated with age as well as serum level of BAP. Therefore, these data not only suggest that different variables are involved in formation of bone erosions and osteophytes in RA patients, but also that periarticular bone changes correlate with alterations in systemic markers of bone metabolism, pointing out BAP as an important parameter.     

Integrated Photoacoustic Ophthalmoscopy and Spectral-domain Optical Coherence Tomography

Both the clinical diagnosis and fundamental investigation of major ocular diseases greatly benefit from various non-invasive ophthalmic imaging technologies. Existing retinal imaging modalities, such as fundus photography¹, confocal scanning laser ophthalmoscopy (cSLO)², and optical coherence tomography (OCT)³, have significant contributions in monitoring disease onsets and progressions, and developing new therapeutic strategies. However, they predominantly rely on the back-reflected photons from the retina. As a consequence, the optical absorption properties of the retina, which are usually strongly associated with retinal pathophysiology status, are inaccessible by the traditional imaging technologies.Photoacoustic ophthalmoscopy (PAOM) is an emerging retinal imaging modality that permits the detection of the optical absorption contrasts in the eye with a high sensitivity^4-7 . In PAOM nanosecond laser pulses are delivered through the pupil and scanned across the posterior eye to induce photoacoustic (PA) signals, which are detected by an unfocused ultrasonic transducer attached to the eyelid. Because of the strong optical absorption of hemoglobin and melanin, PAOM is capable of non-invasively imaging the retinal and choroidal vasculatures, and the retinal pigment epithelium (RPE) melanin at high contrasts ^6,7. More importantly, based on the well-developed spectroscopic photoacoustic imaging^5,8 , PAOM has the potential to map the hemoglobin oxygen saturation in retinal vessels, which can be critical in studying the physiology and pathology of several blinding diseases ⁹ such as diabetic retinopathy and neovascular age-related macular degeneration.Moreover, being the only existing optical-absorption-based ophthalmic imaging modality, PAOM can be integrated with well-established clinical ophthalmic imaging techniques to achieve more comprehensive anatomic and functional evaluations of the eye based on multiple optical contrasts^6,10 . In this work, we integrate PAOM and spectral-domain OCT (SD-OCT) for simultaneously in vivo retinal imaging of rat, where both optical absorption and scattering properties of the retina are revealed. The system configuration, system alignment and imaging acquisition are presented.     

Simulation of the Planetary Interior Differentiation Processes in the Laboratory

A planetary interior is under high-pressure and high-temperature conditions and it has a layered structure. There are two important processes that led to that layered structure, (1) percolation of liquid metal in a solid silicate matrix by planet differentiation, and (2) inner core crystallization by subsequent planet cooling. We conduct high-pressure and high-temperature experiments to simulate both processes in the laboratory. Formation of percolative planetary core depends on the efficiency of melt percolation, which is controlled by the dihedral (wetting) angle. The percolation simulation includes heating the sample at high pressure to a target temperature at which iron-sulfur alloy is molten while the silicate remains solid, and then determining the true dihedral angle to evaluate the style of liquid migration in a crystalline matrix by 3D visualization. The 3D volume rendering is achieved by slicing the recovered sample with a focused ion beam (FIB) and taking SEM image of each slice with a FIB/SEM crossbeam instrument. The second set of experiments is designed to understand the inner core crystallization and element distribution between the liquid outer core and solid inner core by determining the melting temperature and element partitioning at high pressure. The melting experiments are conducted in the multi-anvil apparatus up to 27 GPa and extended to higher pressure in the diamond-anvil cell with laser-heating. We have developed techniques to recover small heated samples by precision FIB milling and obtain high-resolution images of the laser-heated spot that show melting texture at high pressure. By analyzing the chemical compositions of the coexisting liquid and solid phases, we precisely determine the liquidus curve, providing necessary data to understand the inner core crystallization process.