Baicalein alleviates osteoarthritis by protecting subchondral bone,inhibiting angiogenesis and synovial proliferation

Osteoarthritis (OA) is one of the most frequent chronic joint diseases with the increasing life expectancy. The main characteristics of the disease are loss of articular cartilage, subchondral bone sclerosis and synovium inflammation. Physical measures, drug therapy and surgery are the mainstay of treatments for OA, whereas drug therapies are mainly limited to analgesics, glucocorticoids, hyaluronic acids and some alternative therapies because of single therapeutic target of OA joints. Baicalein, a traditional Chinese medicine extracted from Scutellaria baicalensis Georgi, has been widely used in anti-inflammatory therapies. Previous studies revealed that baicalein could alleviate cartilage degeneration effectively by acting on articular chondrocytes. However, the mechanisms involved in baicalein-mediated protection of the OA are not completely understood in consideration of integrality of arthrosis. In this study, we found that intra-articular injection of baicalein ameliorated subchondral bone remodelling. Further studies showed that baicalein could decrease the number of differentiated osteoblasts by inhibiting pre-osteoblasts proliferation and promoting pre-osteoblasts apoptosis. In addition, baicalein impaired angiogenesis of endothelial cells and inhibited proliferation of synovial cells. Taken together, these results implicated that baicalein might be an effective medicine for treating OA by regulating multiple targets.     

探讨肠道菌群对膝骨关节炎治疗的影响

膝骨关节炎是一种中老年人常见的慢性疾病,因其发病率及致残率高,严重影响患者的生存质量。膝骨关节炎不仅增加了患者及其家庭乃至社会的经济压力,而且还加重了心理负担。治疗方案虽然多,但目前尚无根治方法,而且疗效也参差不齐。肠道菌群作为人体巨大的微生物宝库,拥有着很大的潜力,这使之成为了科研领域一个新的研究热点,其对膝骨关节炎的影响也成为了人们关注的焦点。本文通过查阅相关文献,从慢性炎症、代谢性疾病、成骨细胞以及破骨细胞这四个方面来阐述和总结肠道菌群与膝骨关节炎的关系,以期为临床上治疗膝骨关节炎提供新的方法与思路。     

Relationship between resting medial gastrocnemius stiffness and drop jump performance

Although the influence of the series elastic element of the muscle–tendon unit on jump performance has been investigated, the corresponding effect of the parallel elastic element remains unclear. This study examined the relationship between the resting calf muscle stiffness and drop jump performance. Twenty-four healthy men participated in this study. The shear moduli of the medial gastrocnemius and the soleus were measured at rest as an index of muscle stiffness using ultrasound shear wave elastography. The participants performed drop jumps from a 15 cm high box. The Spearman rank correlation coefficient was used to examine the relationships between shear moduli of the muscles and drop jump performance. The medial gastrocnemius shear modulus showed a significant correlation with the drop jump index (jump height/contact time) (r = 0.414, P = 0.044) and jump height (r = 0.411, P = 0.046), but not with contact time (P > 0.05). The soleus shear modulus did not correlate with these jump parameters (P > 0.05). These results suggest that the resting medial gastrocnemius stiffness can be considered as one of the factors that influence drop jump performance. Therefore, increase in resting muscle stiffness should enhance explosive athletic performance in training regimens.     

受体相互作用蛋白质激酶3通过上调整合素β3促进骨关节炎相关病变

骨关节炎（osteoarthritis,OA）是最常见的慢性致残性关节疾患,目前尚无针对病因的有效治疗手段。程序性坏死在多种疾病中扮演关键角色,受体相互作用蛋白质激酶3（receptor-interacting protein kinase 3, RIP3）是程序性坏死进程的关键调控因子。有研究显示,RIP3在人与鼠骨关节炎退变软骨组织中表达水平显著上调,提示程序性坏死的发生,但RIP3在软骨中的具体病生理角色仍不明确。本研究拟对过表达RIP3前后的软骨细胞转录物组进行测序分析,探索RIP3在骨关节炎进程中发挥作用的具体机制。RNA测序结果显示,RIP3的过表达诱发软骨细胞中244个基因表达上调,277个表达下调。通过进一步构建基因间共表达作用网络,筛选出16个候选靶基因在mRNA水平进行验证,证实RIP3对磷脂酰肌醇3激酶调节亚单位5（phosphoinositide-3-kinase, regulatory subunit 5,Pik3r5）、整合素β3（integrin subunit beta 3,Itgb3）及成髓细胞瘤转录因子第2亚型（MYB proto-oncogene like 2,Mybl2）的表达上调作用最为显著。CCK-8以及乳酸脱氢酶活性检测结果表明,利用siRNA沉默Itgb3的表达可显著抑制RIP3诱发的软骨细胞活力下降及程序性坏死,同时也抑制了RIP3对软骨细胞中分解代谢相关基因Mmp1、Mmp13与Il6的表达上调作用,以及其对合成代谢相关基因Acan、Col2a1与Sox9的下调作用。本研究证实,RIP3通过上调软骨细胞中Itgb3的表达诱发软骨细胞坏死与软骨基质代谢紊乱,并最终导致软骨退变,为骨关节炎的临床治疗提供了新靶点,同时进一步明确了程序性坏死的病理生理学意义。     

半乳糖凝集素‑3对骨关节炎成骨细胞矿化的作用研究

炎症反应以炎症因子为代表,是骨关节炎（osteoarthritis,OA）中软骨下骨发生病变的重要机制。炎症因子半乳糖凝集素?3（galectin?3,Gal?3）会引起软骨下骨OA样变,但机制尚不清楚。利用因膝关节OA行全膝关节置换患者的胫骨平台标本,培养成骨细胞。分别在正常氧和缺氧条件下用Gal?3处理成骨细胞后,检测骨钙素、ERRα和Sirtuin 1的表达情况。同时,给予矿化液培养的成骨细胞以Gal?3处理,28 d后使用茜素红染色检测成骨细胞矿化程度并进行定量分析。结果显示,Gal?3抑制成骨细胞骨钙素的表达,在缺氧条件下诱导ERRα和Sirtuin1的表达,在正常氧条件下Gal?3促进OA成骨细胞的矿化。正常氧条件下,Gal?3可以诱导OA成骨细胞的异常矿化,缺氧条件下Gal?3促进成骨,表明Gal?3在OA成骨细胞的矿化中扮演重要角色。     

Use of a whole-slide imaging system to assess the presence and alteration of lymphatic vessels in joint sections of arthritic mice

Abstract

We investigated the presence and alteration of lymphatic vessels in joints of arthritic mice using a whole-slide imaging system. Joints and long bone sections were cut from paraffin blocks of two mouse models of arthritis: meniscal-ligamentous injury (MLI)-induced osteoarthritis (OA) and TNF transgene (TNF-Tg)-induced rheumatoid arthritis (RA). MLI-OA mice were fed a high fat diet to accelerate OA development. TNF-Tg mice were treated with lymphatic growth factor VEGF-C virus to stimulate lymphangiogenesis. Sections were double immunofluorescence stained with anti-podoplanin and alpha-smooth muscle actin antibodies. The area and number of lymphatic capillaries and mature lymphatic vessels were determined using a whole-slide imaging system and its associated software. Lymphatic vessels in joints were distributed in soft tissues mainly around the joint capsule, ligaments, fat pads and muscles. In long bones, enriched lymphatic vessels were present in the periosteal areas adjacent to the blood vessels. Occasionally, lymphatic vessels were observed in the cortical bone. Increased lymphatic capillaries, but decreased mature lymphatic vessels, were detected in both OA and RA joints. VEGF-C treatment increased lymphatic capillary and mature vessel formation in RA joints. Our findings suggest that the lymphatic system may play an important role in arthritis pathogenesis and treatment.     

Increased hip internal abduction moment and reduced speed are the gait strategies used by women with knee osteoarthritis

The purpose of this study was to identify the gait strategies in women with mild and moderate knee osteoarthritis (OA). Forty women diagnosed with OA of the knee and 40 healthy women participated in the study. Toe-out progression angle, trunk lateral lean, hip internal abduction moment and gait speed were measured using Qualisys ProReflex System and two force plates. Principal component analysis was applied to extract features from the gait waveforms data that characterized the waveforms main modes of temporal variation. Discriminant analysis with a stepwise model was conducted to determine which strategies could best discriminate groups. According to the discriminant model, the PC2 of the internal abduction moment of the hip and the gait speed were the most discriminatory variables between the groups. The OA group showed decreased gait speed, decreased hip internal abduction moment during the loading response phase, and increased hip internal abduction moment during the mid and terminal stance phases. Interventions that may increase hip internal abduction moment, such as the strengthening of the hip abductors muscles, may benefit women with knee OA. Training slower than normal gait speeds must be considered in light of potential adverse implications on overall physical function, daily tasks, and safety.     

A Three-Dimensional Musculoskeletal Model of the Human Knee Joint. Part 2: Analysis of Ligament Function

A three-dimensional model of the knee is used to study ligament function during anterior-posterior (a-p) draw, axial rotation, and isometric contractions of the extensor and flexor muscles. The geometry of the model bones is based on cadaver data. The contacting surfaces of the femur and tibia are modeled as deformable; those of the femur and patella are assumed to be rigid. Twelve elastic elements are used to describe the geometry and mechanical properties of the cruciate ligaments, the collateral ligaments, and the posterior capsule. The model is actuated by thirteen musculotendinous units, each unit represented as a three-element muscle in series with tendon. The calculations show that the forces applied during a-p draw are substantially different from those applied by the muscles during activity. Principles of knee-ligament function based on the results of in vitro experiments may therefore be overstated. Knee-ligament forces during straight a-p draw are determined solely by the changing geometry of the ligaments relative to the bones: ACL force decreases with increasing flexion during anterior draw because the angle between the ACL and the tibial plateau decreases as knee flexion increases; PCL force increases with increasing flexion during posterior draw because the angle between the PCL and the tibial plateau increases. The pattern of ligament loading during activity is governed by the geometry of the muscles spanning the knee: the resultant force in the ACL during isometric knee extension is determined mainly by the changing orientation of the patellar tendon relative to the tibia in the sagittal plane; the resultant force in the PCL during isometric knee flexion is dominated by the angle at which the hamstrings meet the tibia in the sagittal plane.     

An improved OpenSim gait model with multiple degrees of freedom knee joint and knee ligaments

Musculoskeletal models are widely used to investigate joint kinematics and predict muscle force during gait. However, the knee is usually simplified as a one degree of freedom joint and knee ligaments are neglected. The aim of this study was to develop an OpenSim gait model with enhanced knee structures. The knee joint in this study included three rotations and three translations. The three knee rotations and mediolateral translation were independent, with proximodistal and anteroposterior translations occurring as a function of knee flexion/extension. Ten elastic elements described the geometrical and mechanical properties of the anterior and posterior cruciate ligaments (ACL and PCL), and the medial and lateral collateral ligaments (MCL and LCL). The three independent knee rotations were evaluated using OpenSim to observe ligament function. The results showed that the anterior and posterior bundles of ACL and PCL (aACL, pACL and aPCL, pPCL) intersected during knee flexion. The aACL and pACL mainly provided force during knee flexion and adduction, respectively. The aPCL was slack throughout the range of three knee rotations; however, the pPCL was utilised for knee abduction and internal rotation. The LCL was employed for knee adduction and rotation, but was slack beyond 20° of knee flexion. The MCL bundles were mainly used during knee adduction and external rotation. All these results suggest that the functions of knee ligaments in this model approximated the behaviour of the physical knee and the enhanced knee structures can improve the ability to investigate knee joint biomechanics during various gait activities.     

Time-dependent elastohydrodynamic lubrication analysis of total knee replacement under walking conditions

This work is concerned with the lubrication analysis of artificial knee joints, which plays an increasing significant role in clinical performance and longevity of components. Time-dependent elastohydrodynamic lubrication analysis for normal total knee replacement is carried out under the cyclic variation in both load and speed representative of normal walking. An equivalent ellipsoid-on-plane model is adopted to represent an actual artificial knee. A full numerical method is developed to simultaneously solve the Reynolds and elasticity equations using the multigrid technique. The elastic deformation is based on the constrained column model. Results show that, under the combined effect of entraining and squeeze-film actions throughout the walking cycle, the predicted central film thickness tends to decrease in the stance phase but keeps a relatively larger value at the swing phase. Furthermore, the geometry of knee joint implant is verified to play an important role under its lubrication condition, and the length of time period is a key point to influence the lubrication performance of joint components.