Genetic architecture of type 2 diabetes

Genome-wide association studies (GWAS) have identified over 70 loci associated with type 2 diabetes (T2D). Most genetic variants associated with T2D are common variants with modest effects on T2D and are shared with major ancestry groups. To what extent the genetic component of T2D can be explained by common variants relies upon the shape of the genetic architecture of T2D. Fine mapping utilizing populations with different patterns of linkage disequilibrium and functional annotation derived from experiments in relevant tissues are mandatory to track down causal variants responsible for the pathogenesis of T2D.     

Genetics of complex disorders

The success stories of identifying genes in Mendelian disorders have stimulated research that aims at identifying the genetic determinants in complex disorders, in which both genetics, environment and chance affect the pathogenetic processes. This review summarizes the brief history and lessons learned from genetic analysis of complex disorders and outlines some landscapes ahead for medical research.     

Spectroscopic and biochemical analysis of regions of the cell wall of the unicellular 'mannan weed', Acetabularia acetabulum

Although the Dasycladalean alga Acetabularia acetabulum has long been known to contain mannan-rich walls, it is not known to what extent wall composition varies as a function of the elaborate cellular differentiation of this cell, nor has it been determined what other polysaccharides accompany the mannans. Cell walls were prepared from rhizoids, stalks, hairs, hair scars, apical septa, gametophores and gametangia, subjected to nuclear magnetic resonance and Fourier transform infrared spectroscopy, and analyzed for monosaccharide composition and linkage, although material limitations prevented some cell regions from being analyzed by some of the methods. In diplophase, walls contain a para-crystalline mannan, with other polysaccharides accounting for 10-20% of the wall mass; in haplophase, gametangia have a cellulosic wall, with mannans and other polymers representing about a quarter of the mass. In the walls of the diplophase, the mannan appears less crystalline than typical of cellulose. The walls of both diploid and haploid phases contain little if any xyloglucan or pectic polysaccharides, but appear to contain small amounts of a homorhamnan, galactomannans and glucogalactomannans, and branched xylans. These ancillary polysaccharides are approximately as abundant in the cellulose-rich gametangia as in the mannan-rich diplophase. In the diplophase, different regions of the cell differ modestly but reproducibly in the composition of the cell wall. These results suggest unique cell wall architecture for the mannan-rich cell walls of the Dasycladales.     

Using reaction mechanism to measure enzyme similarity

The concept of reaction similarity has been well studied in terms of the overall transformation associated with a reaction, but not in terms of mechanism. We present the first method to give a quantitative measure of the similarity of reactions based upon their explicit mechanisms. Two approaches are presented to measure the similarity between individual steps of mechanisms: a fingerprint-based approach that incorporates relevant information on each mechanistic step; and an approach based only on bond formation, cleavage and changes in order. The overall similarity for two reaction mechanisms is then calculated using the Needleman-Wunsch alignment algorithm. An analysis of MACiE, a database of enzyme mechanisms, using our measure of similarity identifies some examples of convergent evolution of chemical mechanisms. In many cases, mechanism similarity is not reflected by similarity according to the EC system of enzyme classification. In particular, little mechanistic information is conveyed by the class level of the EC system.     

Development of an apparatus for rapid release of oligosaccharides at the glycosaminoglycan-protein linkage region in chondroitin sulfate-type proteoglycans

An apparatus, AutoGlycoCutter (AGC), was developed as a tool for rapid release of O-linked-type glycans under alkaline conditions. This system allowed rapid release of oligosaccharides at the glycosaminoglycan-protein linkage region in proteoglycans (PGs). After digestion of PGs with chondroitinase ABC, the oligosaccharides at the linkage region were successfully released from the protein core by AGC within 3 min. The reducing ends of the released oligosaccharides were labeled with 2-aminobenzoic acid and analyzed by a combination of capillary electrophoresis (CE) and matrix-assisted laser desorption time-of-flight mass spectrometry. In addition, the unsaturated disaccharides produced by chondroitinase ABC derived from the outer parts of the glycans were labeled with 2-aminoacridone and analyzed by CE to determine the disaccharide compositions. We evaluated AGC as a method for structural analysis of glycosaminoglycans in some chondroitin-sulfate-type PGs (urinary trypsin inhibitor, bovine nasal cartilage PG, bovine aggrecan, bovine decorin, and bovine biglycan). Recoveries of the released oligosaccharides were 57-73% for all PGs tested in the present study. In particular, we emphasize that the use of AGC achieved ca. 1000-fold rapid release of O-glycans compared with the conventional method.     

The DcMaster Transposon Display maps polymorphic insertion sites in the carrot (Daucus carota L.) genome

DcMaster is a family of PIF/Harbinger-like class II transposable elements identified in carrot. We present a modified Transposon Display molecular marker system allowing amplification of genomic regions containing DcMaster elements. We scored 77 DcMaster Transposon Display (DcMTD) amplicons, of which 54 (70%) were segregating in the F₂ progeny from the cross between wild and cultivated carrot. Segregating amplicons were incorporated into a previously developed molecular linkage map of carrot. Twenty-eight markers were attributed to the wild parent, 23 originated from the cultivated parent, and three markers remained unlinked. The markers were evenly distributed among the nine linkage groups. However, differences in the distribution pattern of DcMaster insertion sites in the genomes of the wild and cultivated parent were observed. Specificity of the obtained amplicons was confirmed by sequencing and three putative DcMaster subfamilies, differing in the sequence of their terminal inverted repeats, were revealed.     

Physical size of the <Emphasis Type="Italic">S</Emphasis> locus region defined by genetic recombination and genome sequencing in <Emphasis Type="Italic">Ipomoea trifida</Emphasis>, Convolvulaceae

Sporophytic self-incompatibility (SSI) in the genus Ipomoea (Convolvulaceae) is controlled by a single polymorphic S locus. We have previously analyzed genomic sequences of an approximately 300 kb region spanning the S locus of the S ₁ haplotype and characterized the genomic structure around this locus. Here, we further define the physical size of the S locus region by mapping recombination breakpoints, based on sequence analysis of PCR fragments amplified from the genomic DNA of recombinants. From the recombination analysis, the S locus of the S ₁ haplotype was delimited to a 0.23 cM region of the linkage map, which corresponds to a maximum physical size of 212 kb. To analyze differences in genomic organization between S haplotypes, fosmid contigs spanning approximately 67 kb of the S ₁₀ haplotype were sequenced. Comparison with the S ₁ genomic sequence revealed that the S haplotype-specific divergent regions (SDRs) spanned 50.7 and 34.5 kb in the S ₁ and S ₁₀ haplotypes, respectively and that their flanking regions showed a high sequence similarity. In the sequenced region of the S ₁₀ haplotype, five of the 12 predicted open reading frames (ORFs) were found to be located in the divergent region and showed co-linear organization of genes between the two S haplotypes. Based on the size of the SDRs, the physical size of the S locus was estimated to fall within the range 34–50 kb in Ipomoea.     

Comparison of topological clustering within protein networks using edge metrics that evaluate full sequence,full structure,and active site microenvironment similarity

The development of accurate protein function annotation methods has emerged as a major unsolved biological problem. Protein similarity networks, one approach to function annotation via annotation transfer, group proteins into similarity-based clusters. An underlying assumption is that the edge metric used to identify such clusters correlates with functional information. In this contribution, this assumption is evaluated by observing topologies in similarity networks using three different edge metrics: sequence (BLAST), structure (TM-Align), and active site similarity (active site profiling, implemented in DASP). Network topologies for four well-studied protein superfamilies (enolase, peroxiredoxin (Prx), glutathione transferase (GST), and crotonase) were compared with curated functional hierarchies and structure. As expected, network topology differs, depending on edge metric; comparison of topologies provides valuable information on structure/function relationships. Subnetworks based on active site similarity correlate with known functional hierarchies at a single edge threshold more often than sequence- or structure-based networks. Sequence- and structure-based networks are useful for identifying sequence and domain similarities and differences; therefore, it is important to consider the clustering goal before deciding appropriate edge metric. Further, conserved active site residues identified in enolase and GST active site subnetworks correspond with published functionally important residues. Extension of this analysis yields predictions of functionally determinant residues for GST subgroups. These results support the hypothesis that active site similarity-based networks reveal clusters that share functional details and lay the foundation for capturing functionally relevant hierarchies using an approach that is both automatable and can deliver greater precision in function annotation than current similarity-based methods.     

Predator and detritivore niche width helps to explain biocomplexity of experimental detritus-based food webs in four aquatic and terrestrial ecosystems

In the study of food webs, the existence and explanation of recurring patterns, such as the scale invariance of linkage density, predator–prey ratios and mean chain length, constitute long-standing issues. Our study focused on litter-associated food webs and explored the influence of detritivore and predator niche width (as δ¹³C range) on web topological structure. To compare patterns within and between aquatic and terrestrial ecosystems and take account of intra-habitat variability, we constructed 42 macroinvertebrate patch-scale webs in four different habitats (lake, lagoon, beech forest and cornfield), using an experimental approach with litterbags. The results suggest that although web differences exist between ecosystems, patterns are more similar within than between aquatic and terrestrial web types. In accordance with optimal foraging theory, we found that the niche width of predators and prey increased with the number of predators and prey taxa as a proportion of total taxa in the community. The tendency was more marked in terrestrial ecosystems and can be explained by a lower per capita food level than in aquatic ecosystems, particularly evident for predators. In accordance with these results, the number of links increased with the number of species but with a significantly sharper regression slope for terrestrial ecosystems. As a consequence, linkage density, which was found to be directly correlated to niche width, increased with the total number of species in terrestrial webs, whereas it did not change significantly in aquatic ones, where connectance scaled negatively with the total number of species. In both types of ecosystem, web robustness to rare species removal increased with connectance and the niche width of predators. In conclusion, although limited to litter-associated macroinvertebrate assemblages, this study highlights structural differences and similarities between aquatic and terrestrial detrital webs, providing field evidence of the central role of niche width in determining the structure of detritus-based food webs and posing foraging optimisation constraints as a general mechanistic explanation of food web complexity differences within and between ecosystem types.     

Molecular investigation of mental retardation locus gene PRSS12 by linkage analysis

The present study was carried out to determine the prevalence of families having mental retardation in Pakistani population. We enrolled seven mentally retarded (MR) families with two or more affected individuals. Family history was taken to minimize the chances of other abnormalities. Pedigrees were drawn using the Cyrillic software (version 2.1). The structure of pedigrees shows that all the marriages are consanguineous and the families have recessive mode of inheritance. All the families were studied by linkage analysis to mental retardation locus (MRT1)/gene PRSS12. Three STR markers (D4S191, D4S2392, and D4S3024) in vicinity of mental retardation (MR) locus (MRT1)/gene PRSS12 were amplified on all the sample of each family by PCR. The PCR products were then genotyped on non denaturing polyacrylamide gel electrophoresis (PAGE). The Haplotype were constructed to determine the pattern of inheritance and also to determine that a family was linked or unlinked to gene PRSS12. One out of the seven families was potentially linked to gene PRSS12, while the other six families remain unlinked.