Microcalorimetric Investigation of DNA,poly(dA)poly(dT) and poly[d(A-C)]poly[d(G-T)] Melting in the Presence of Water Soluble (Meso tetra (4 N oxyethylpyridyl) Porphyrin) and its Zn Complex

Abstract

Thermodynamic parameters of melting process (δH_m, T_m, δT_m) of calf thymus DNA, poly(dA)poly(dT) and poly(d(A-C))·poly(d(G-T)) were determined in the presence of various concentrations of TOEPyP(4) and its Zn complex. The investigated porphyrins caused serious stabilization of calf thymus DNA and poly poly(dA)poly(dT), but not poly(d(A-C))poly(d(G-T)). It was shown that TOEpyp(4) revealed GC specificity, it increased T_m of satellite fraction by 24°C, but ZnTOEpyp(4), on the contrary, predominately bound with AT-rich sites and increased DNA main stage T_m by 18°C, and T_m of poly(dA)poly(dT) increased by 40 °C, in comparison with the same polymers without porphyrin. ZnTOEpyp(4) binds with DNA and poly(dA)poly(dT) in two modes—strong and weak ones. In the range of r from 0.005 to 0.08 both modes were fulfilled, and in the range of r from 0.165 to 0.25 only one mode—strong binding—took place. The weak binding is characterized with shifting of T_m by some grades, and for the strong binding T_m shifts by ～ 30–40°C. Invariability of ΔH_m of DNA and poly(dA)poly(dT), and sharp increase of T_m in the range of r from 0.08 to 0.25 for thymus DNA and 0.01–0.2 for poly(dA)poly(dT) we interpret as entropic character of these complexes melting. It was suggested that this entropic character of melting is connected with forcing out of H₂O molecules from AT sites by ZnTOEpyp(4) and with formation of outside stacking at the sites of binding. Four-fold decrease of calf thymus DNA melting range width ΔT_m caused by increase of added ZnTO- Epyp(4) concentration is explained by rapprochement of AT and GC pairs thermal stability, and it is in agreement with a well-known dependence, according to which ΔT～T_GC-T_AT for DNA obtained from higher organisms (L. V. Berestetskaya, M. D. Frank-Kamenetskii, and Yu. S. Lazurkin. Biopolymers 13, 193–205 (1974)). Poly (d(A-C))poly(d(G-T)) in the presence of ZnTOEpyp(4) gives only one mode of weak binding. The conclusion is that binding of ZnTOEpyp(4) with DNA depends on its nucleotide sequence.     

Microbiological and Biotechnological Aspects of Metabolism of Carbamates and Organophosphates

Abstract

Several carbamate and organophosphate compounds are used to control a wide variety of insect pests, weeds, and disease-transmitting vectors. These chemicals were introduced to replace the recalcitrant and hazardous chlorinated pesticides. Although newly introduced pesticides were considered to be biodegradable, some of them are highly toxic and their residues are found in certain environments. In addition, degradation of some of the carbamates generates metabolites that are also toxic. In general, hydrolysis of the carbamate and organophosphates yields less toxic metabolites compared with the metabolites produced from oxidation. Although microorganisms capable of degrading many of these pesticides have been isolated, knowledge about the biochemical pathways and respective genes involved in the degradation is sparse. Recently, a great deal of interest in the mechanisms of biodegradation of carbamate and organophosphate compounds has been shown because (1) an efficient mineralization of the pesticides used for insect control could eliminate the problems of environmental pollution, (2) a balance between degradation and efficacy of pesticides could result in safer application and effective insect control, and (3) knowledge about the mechanisms of biodegradation could help to deal with situations leading to the generation of toxic metabolites and bioremediation of polluted environments. In addition, advances in genetic engineering and biotechnology offer great potential to exploit the degradative properties of microorganisms in order to develop bioremediation strategies and novel applications such as development of economic plants tolerant to herbicides. In this review, recent advances in the biochemical and genetic aspects of microbial degradation of carbamate and organophosphates are discussed and areas in need of further investigation identified.     

Authigenic mineralization and detrital clay binding by freshwater biofilms: The Brahmani river,India

This study sought to understand the origin and fate of one of the bitumen mounds found on the bottom of Lake Baikal. These mounds are located at a depth of 900 m beneath oil spots detected on the surface of Lake Baikal (53° 18′24^″, 108° 23′20^″). The two mounds were sampled with a manipulator from a “MIR” deep-water manned submersible. Mature mound No. 8 was subjected to chemical and microbiological studies. Mound No. 3 was subjected only to chemical studies; we failed to perform microbiological analyses of this mound for logistic reasons. Oil spots collected from the water surface, samples of mound No. 3 and No. 8, were subjected to GC/MS analysis. The water contained aliphatic hydrocarbons with chains between C₈ and C₂₃, with the most abundant chain length being C₁₈. Mound No. 3 with the most abundant chain length being C₁₈ actively released oil droplets into the water. It contained 770 mg/g of C₁₃-C₃₂ n-alkanes, with a maximum at C₂₃ (160 mg/g). Mound No. 8 was inactive and contained 148 mg/g of aliphatic C₂₂-C₃₄ n-alkanes, with a maximum at C₂₅. Mound No. 8 also consisted of 3% inorganic matter, 48% unresolved complex mixture (UCM) and less than 1% other compounds (polyaromatic hydrocarbons, isoprenoids, carotenoids, and hopanes). The core of this sample used as inoculate, yielded Rhodococci when cultivated on oil as the only source of carbon. Cultivation of the sample on agar-containing Raymond inorganic medium with crude West Siberian oil as the only source of carbon revealed colonies of these bacteria, which all appeared identical. PCR was performed with DNA isolated from 5 colonies, using primers for 16S rRNA genes. Comparison of the sequences of the 5 PCR products over a length of 714 bp revealed that they were almost identical. Phylogenetic analysis of these homologous sequences showed that they were similar to the corresponding sequences of the genus Rhodococcus. Substrate demands, the morphology of the colonies, and SEM and TEM data confirmed that the isolates obtained could indeed be Rhodococci. All of the isolates could grow in bulk cultures with inorganic medium supplemented with crude oil. Moreover, all of the isolates degraded aliphatic hydrocarbons with lengths between C₁₁ and C₂₉. C₂₃-C₂₉ hydrocarbons were degraded completely. The isolates could grow at 4–37°C. The most unexpected finding was that of the many microorganisms capable of consuming oil, only Rhodococci exhibited this ability in the inactive bitumen mound. The possible mechanisms of how crude oil is transformed into bitumen mounds and mature bitumen are discussed.     

Evaluation of pretreatment methods for lignocellulosic ethanol production from energy cane variety L 79-1002

Approximately half of the 80 billion tons of crop produced annually around the world remains as residue that could serve as a renewable resource to produce valuable products such as ethanol and butanol. Ethanol produced from lignocellulosic biomass is a promising renewable alternative to diminishing oil and gas liquid fuels. Sugarcane is an important industry in Louisiana. The recently released variety of “energy cane” has great potential to sustain a competitive sugarcane industry. It has been demonstrated that fuel-grade ethanol can be produced from post harvest sugarcane residue in the past, but optimized ethanol production was not achieved. Optimization of the fermentation process requires efficient pretreatment to release cellulose and hemicellulose from lignocellulosic complex of plant fiber. Determining optimal pretreatment techniques for fermentation is essential for the success of lignocellulosic ethanol production process. The purpose of this study was to evaluate three pretreatment methods for the energy cane variety L 79-1002 for maximum lignocellulosic ethanol production. The pretreatments include alkaline pretreatment, dilute acid hydrolysis, and solid-state fungal pretreatment process using brown rot and white rot fungi. Pretreated biomass was enzymatically saccharified and subjected to fermentation using a recombinant Escherichia coli FBR5. The results revealed that all pretreatment processes produced ethanol. However, the best result was observed in dilute acid hydrolysis followed by alkaline pretreatment and solid-state fungal pretreatment.     

Purification and biochemical characterization of two extracellular peroxidases from Phanerochaete chrysosporium responsible for lignin biodegradation

Two extracellular peroxidases from Phanerochaete chrysosporium, namely a lignin peroxidase (LiP) and manganese peroxidase (MnP), were purified simultaneously by applying successively, ultrafiltration, ion-exchange and gel filtration chromatography. LiP and MnP have a molecular mass of 36 and 45 kDa, respectively. The optimal pHs for LiP and MnP activities were 3.0 and 4.5, respectively. Both peroxidases showed maximal activity at 30 °C and moderate thermostability. MnP activity was strongly inhibited by Fe²⁺, Zn²⁺, Mg²⁺ and Hg²⁺, and enhanced by Mn²⁺, Ca²⁺ and Cu²⁺. LiP activity was enhanced by Ca²⁺, Na⁺ and Co²⁺ and it was inhibited in the presence of K⁺, Hg⁺, Fe²⁺, Mg²⁺ and high concentrations of Cu²⁺ and Zn²⁺. The K_m and V_max for LiP toward veratryl alcohol as a substrate were 0.10 mM and 15.2 U mg⁻¹, respectively and for MnP toward Mn²⁺, they were respectively 0.03 mM and 25.5 U mg⁻¹. The two peroxidases were also able to break down rice lignin in a small-scale solid state treatment system. Data suggest these two peroxidases may be considered as potential candidates for the development of enzyme-based technologies for lignin degradation.     

Enzymatic Properties of Alkaline Proteinase from Aspergillus candidus

Some enzymatic properties were examined with the purified alkaline proteinase from Aspergillus candidus. The isoelectric point was determined to be 4.9 by polyacrylamide gel disc electrofocusing. The optimum pH for milk casein was around 11.0 to 11.5 at 30°C. The maximum activity was found at 47°C at pH 7.0 for 10 min. The enzyme was stable between pH 5.0 and 9.0 at 30°C and most stable at pH 6.0 at 50°C. The enzyme activity over 95% remained at 40°C, but was almost completely lost at 60°C for 10 min. Calcium ions protected the enzyme from heat denaturation to some extent. No metal ions examined showed stimulatory effect and Hg²⁺ ions inhibited the enzyme. The enzyme was also inhibited by potato inhibitor and diisopropylphosphorofluoridate, but not by metal chelating agent or sulfhydryl reagents. A. candidus alkaline proteinase exhibited immunological cross-reacting properties similar to those of alkaline proteinases of A. sojae and A. oryzae.     

A Convenient Method for the Quantitative Determination of Pipecolic Acid

The quantitative determination of pipecolic acid was examined.

The reaction of 3% ninhydrin solution in n-butanol, saturated with citrate buffer (pH 4.2), with pipecolic acid in boiling water for 3 min yielded the colored products showing λ_max at 570 mμ, but with proline hardly yielded those products. By the colorimetry proposed, it is possible to determine the amount of pipecolic acid in the sample containing proline no more than 50 times the amount of the pipecolic acid, directly from the calibration curve using pipecolic acid.

The method for removal of amino acids from the sample containing pipecolic acid and proline was examined and discussed.     

Degradation of Car Engine Base Oil by Rhodococcus sp. NDKK48 and Gordonia sp. NDKY76A

Two microorganisms (NDKK48 and NDKY76A) that degrade long-chain cyclic alkanes (c-alkanes) were isolated from soil samples. Strains NDKK48 and NDKY76A were identified as Rhodococcus sp. and Gordonia sp., respectively. Both strains used not only normal alkane (n-alkane) but also c-alkane as a sole carbon and energy source, and the strains degraded more than 27% of car engine base oil (1% addition).     

Oxidative Degradation of 4-Hydroxyacetophenone in Arthrobacter sp. TGJ4

The 4-hydroxyacetophenone assimilating bacterium Arthrobacter sp. TGJ4 was isolated from a soil sample. The resting cell reaction suggested that the strain cleaved 4-hydroxyacetophenone and its 3-methoxy derivative to the corresponding carboxylic acids and formaldehyde. Some properties of the enzyme catalyzing the cleavage reaction were examined.