Nanostructure and elastic modulus of single trabecula in bovine cancellous bone

We aimed to investigate the elastic modulus of trabeculae using tensile tests and assess the effects of nanostructure at the hydroxyapatite (HAp) crystal scale on the elastic modulus. In the experiments, 18 trabeculae that were at least 3 mm in length in the proximal epiphysis of three adult bovine femurs were used. Tensile tests were conducted using a small tensile testing device coupled with microscopy under air-dried condition. The c-axis orientation of HAp crystals and the degree of orientation were measured by X-ray diffraction. To observe the deformation behavior of HAp crystals under tensile loading, the same tensile tests were conducted in X-ray diffraction measurements. The mineral content of specimens was evaluated using energy dispersive X-ray spectrometry. The elastic modulus of a single trabecula varied from 4.5 to 23.6 GPa, and the average was 11.5±5.0 GPa. The c-axis of HAp crystals was aligned with the trabecular axis and the crystals were lineally deformed under tensile loading. The ratio of the HAp crystal strain to the tissue strain (strain ratio) had a significant correlation with the elastic modulus (r=0.79; P<0.001). However, the mineral content and the degree of orientation did not vary widely and did not correlate with the elastic modulus in this study. It suggests that the strain ratio may represent the nanostructure of a single trabecula and would determine the elastic modulus as well as mineral content and orientation.     

Bone calcium/phosphorus ratio determination using dual energy X-ray method

Non-invasive dual energy methods have been used extensively on osteoporosis diagnosis estimating parameters, such as, Bone Mineral Density (BMD) and Bone Mineral Content (BMC). In this study, an X-ray dual energy method (XRDE) was developed for the estimation of the bone Calcium-to-Phosphorous (Ca/P) mass ratio, as a bone quality index. The optimized irradiation parameters were assessed by performing analytical model simulations. X-ray tube output, filter material and thickness were used as input parameters. A single exposure technique, combined with K-edge filtering, was applied. The optimal X-ray spectra were selected according to the resulted precision and accuracy values. Experimental evaluation was performed on an XRDE system incorporating a Cadmium Telluride (CdTe) photon counting detector and three bone phantoms with different nominal mass Ca/P ratios. Additionally, the phantoms’ mass Ca/P ratios were validated with energy-dispersive X-ray spectroscopy (EDX). Simulation results showed that the optimum filter atomic number (Z) ranges between 57 and 70. The optimum spectrum was obtained at 100 kVp, filtered with Cerium (Ce), with a surface density of 0.88 g/cm². All Ca/P ratio measurements were found to be accurate to within 1.6% of the nominal values, while the precision ranged between 0.91 and 1.37%. The accuracy and precision values of the proposed non-invasive method contributes to the assessment of the bone quality state through the mass Ca/P ratio determination.     

Chitosan derivatives alter release profiles of model compounds from calcium phosphate implants

The aim of the current study was to evaluate the impact of chitosan derivatives, namely N-octyl-chitosan and N-octyl-O-sulfate chitosan, incorporated in calcium phosphate implants to the release profiles of model drugs. The rate and extent of calcein (on M.W. 650 Da) ED, and FITC-dextran (M.W. 40 kDa) on in vitro release were monitored by fluorescence spectroscopy. Results show that calcein release is affected by the type of chitosan derivative used. A higher percentage of model drug was released when the hydrophilic polymer N-octyl-sulfated chitosan was present in the tablets compared with the tablets containing the hydrophobic polymer N-octyl-chitosan. The release profiles of calcein or FD from tablets containing N-octyl-O-sulfate revealed a complete release for FD after 120 h compared with calcein where 20% of the drug was released over the same time period. These results suggest that the difference in the release profiles observed from the implants is dependent on the molecular weight of the model drugs. These data indicate the potential of chitosan derivatives in controlling the release profile of active compounds from calcium phosphate implants.     

Metabolism of 4-hydroxyaminoquinoline-1-oxide and its binding to DNA in chick embryos

The metabolic pathway of 4-hydroxyaminoquinoline-1-oxide (4HAQO) and its binding to DNA was studied in 2-day chick embryos administered [G-3H]4HAQO in a shell-less culture. The 4HAQO rapidly metabolized into non-carcinogenic compounds and 1 h after administration only very small amounts of free 4HAQO could be detected in the embryo cells. The amount of DNA-bound 4HAQO in the embryo cells reached a maximum 2 h after administration, then began to decrease. The maximum extent (mu mol/mol P of nucleotide) was 18.2, equivalent to 1 molecule of 4HAQO-purine adducts per 2.8 X 10(4) base pairs of DNA. It was possible to detect removal of 4HAQO-purine adducts from DNA in chick embryo cells in a shell-less culture. A dose-response relationship for the killing effect of 4HAQO on 2-day embryos was observed in the range of 0.24-24 nmol 4HAQO per embryo. The practicality of the present method of administration of 4HAQO for 'flash administration' of compounds to chick embryo and the advantages of the shell-less culture method which provides access for biochemical and developmental studies of chick embryos were also discussed.     

Chitosan and hydroxyapatite composite cross‐linked by dopamine has improved anisotropic hydroxyapatite growth and wet mechanical properties

Three of the major impediments to using hydroxyapatite (HAp)‐collagen composites for hard tissue repair are the difficulties in anisotropic growth of HAp, in functional collagen production, and in their cross‐linking. To solve these problems, we fabricated HAp‐based composites for hard tissue repair by using chitosan as a collagen matrix substitute, and dopamine as a replacement for aldehyde‐based cross‐linkers. In the presence of chitosan and dopamine, the HAp particles grew anisotropically in a needle shape with an aspect ratio of ～4.4. The needle‐shaped HAp particles were dispersed well in the chitosan matrix, and dopamine‐mediated cross‐linking enhanced the stiffness and reduced swelling in the presence of water. The composite is too weak for use in hard tissue repair, but could be used for curing dentin sensitivity by blocking and remineralization on dentinal tubules, and in drug‐delivery applications.     

Enrichment and characterization of histones by two-dimensional hydroxyapatite/reversed-phase liquid chromatography-mass spectrometry

Here we report a novel two-dimensional liquid chromatography-mass spectrometry (2D LC-MS) method that combines offline hydroxyapatite (HA) chromatography with online reversed-phase liquid chromatography-mass spectrometry (HA/RP LC-MS). The 2D LC-MS method was used to enrich and characterize histones and their posttranslational modifications. The 2D HA/RP LC-MS approach separates histones based on their relative binding affinity to DNA and relative hydrophobicity. HA/RP separations showed improvement in the number of histone isoforms detected as compared with one-dimensional RP LC-MS of acid-extracted histones. The improved histone fractionation resulted in better detection of lower abundant histone variants as well as their posttranslationally modified isoforms. Histones eluted from the HA/RP in the following order: H1, H2A/H2B heterodimers followed by H3/H4 heterotetramers, as predicted from their spatial organization in nucleosomes for binding affinity to DNA. Comparison between HA-purified and acid-extracted histones revealed similar histone profiles with the exception that the HA fractions showed a greater number of H1 isoforms. Two elution conditions were also examined: batch elution and salt gradient elution. Although both elution techniques were able to fractionate the histones sufficiently, the salt gradient approach has the most potential for purification of selected histone isoforms.     

Effect of Mg, Sr, and Mn on the chemico-physical and in vitro biological properties of calcium phosphate biomimetic coatings

We previously developed a calcium phosphate (CaP) calcifying solution that allows to deposit a uniform layer of nanocrystalline apatite on metallic implants in a few hours. In this work we modified the composition of the CaP solution by addition of Sr²⁺, Mg²⁺, and Mn²⁺, in order to improve the biological performance of the implants. The results of the investigation performed on the coatings, as well as on the powders precipitated in the absence of the substrates, indicate that both Sr²⁺ and Mg²⁺ reduce the extent of precipitation, although they are quantitatively incorporated into the nanocrystalline apatitic phase. The inhibitory effect on deposition is much more evident for Mn²⁺, which completely hinders the precipitation of apatite and yields just a small amount of amorphous phosphate relatively rich in manganese content. Human osteoblast-like MG-63 cells cultured on the different materials show that the Mg²⁺ and Sr²⁺ apatitic coatings promote proliferation and expression of collagen type I, with respect to bare Ti and to the thin layer of amorphous phosphate obtained in the presence of Mn²⁺. However, the relatively high content of Mn²⁺ in the phosphate has a remarkable beneficial effect on osteocalcin production, which is even greater than that observed for Sr²⁺.     

In vitro hydroxyapatite adsorbed salivary proteins

In spite of the present knowledge about saliva components and their respective functions, the mechanism(s) of pellicle and dental plaque formation have hitherto remained obscure. This has prompted recent efforts on in vitro studies using hydroxyapatite (HA) as an enamel model. In the present study salivary proteins adsorbed to HA were extracted with TFA and EDTA and resolved by 2D electrophoresis over a pH range between 3 and 10, digested, and then analysed by MALDI-TOF/TOF mass spectrometry and tandem mass spectrometry. Nineteen different proteins were identified using automated MS and MS/MS data acquisition. Among them, cystatins, amylase, carbonic anhydrase, and calgranulin B, were identified.     

Calculation of sequence divergence from the thermal stability of DNA heteroduplexes

Summary Measurements are reported of the thermal stability of DNA heteroduplexes between clones of the eta-globin pseudogene from a variety of primates. The known sequences of this 7.1-kb region differ from each over a range from 1.6% for human versus chimp to nearly 12% for human versus spider monkey. Thermal stability was determined by standard hydroxyapatite thermal elution, and the results show a precisely linear decrease in thermal stability with divergence. The slope of the regression line is 1.18% sequence divergence per degree centigrade reduction in thermal stability.     

Confocal laser scanning microscopy in orthopaedic research

Confocal laser scanning microscopy (CLSM) is a type of high-resolution fluorescence microscopy that overcomes the limitations of conventional widefield microscopy and facilitates the generation of high-resolution 3D images from relatively thick sections of tissue. As a comparatively non-destructive imaging technique, CLSM facilitates the in situ characterization of tissue microstructure. Images generated by CLSM have been utilized for the study of articular cartilage, bone, muscle, tendon, ligament and menisci by the foremost research groups in the field of orthopaedics including those teams headed by Bush, Errington, Guilak, Hall, Hunziker, Knight, Mow, Poole, Ratcliffe and White. Recent evolutions in techniques and technologies have facilitated a relatively widespread adoption of this imaging modality, with increased "user friendliness" and flexibility. Applications of CLSM also exist in the rapidly advancing field of orthopaedic implants and in the investigation of joint lubrication.