Viability, strength, and fragmentation of Saccharopolyspora erythraea in submerged fermentation.

Two fermentations of the commercially important erythromycin-producing filamentous bacterium Saccharopolyspora erythraea were conducted in defined media. One was glucose-limited and the other nitrate-limited. The viability of the hyphae was determined using the fluorescent stain BacLight (Molecular Probes, Eugene, OR). Also, the force required to strain hyphae to breakage was determined using micromanipulation and a sensitive force transducer. In both fermentations, fragmentation coincided with the appearance of regions in the mycelia with permeabilised membranes (considered nonviable). Under glucose-limitation, hyphal breaking force rose to 1,050 +/- 130 nN at the end of the growth phase and fell to an undetectable value as a result of glucose exhaustion. Under nitrate-limitation, hyphal breaking force fell from 900 +/- 160 nN during the growth phase to 550 +/- 40 nN in the stationary phase. In both cases image analysis showed that the dimensions of mycelia were of the same order, suggesting that the major factor influencing fragmentation was the appearance of nonviable regions (assumed to be weak). The location in which nonviable regions first appear within hyphae could not be determined because of their appearance coinciding with fragmentation.     

Kinetic and mechanistic considerations in the gelation of genipin-crosslinked gelatin

The gelling properties (gel time (t_gel) and gel strength) of a 10% (w/w) gelatin sol were investigated as a function of genipin (GP) concentration (0–15 mM) and temperature (25–55 °C) to discern mechanisms and optimal conditions for fixation. Gel time increased with increasing temperature, reached a maximum, and then declined as temperature was raised further. By contrast, network strength data followed the opposite trend. From the thermal behavior of t_gel and network strength, it was inferred that gelation in the low-temperature regime was dominated by hydrogen bonding, while in the high-temperature regime it was dominated by covalent crosslinking. At higher temperatures, crosslinking was described by an Arrhenius rate law expression, with activation energies between 63.2 and 67.8 kJ/mol, depending on GP concentration. In the low temperature regime, an Arrhenius plot resulted in negative activation energies of −75.8 and −64.4 kJ/mol in the presence of 10 and 15 mM GP, respectively. With an increase in both GP concentration and temperature, the gelatin network gradually shifted from being dominated by hydrogen bonds (physical crosslinks) to covalent crosslinking (chemical crosslinks).     

Estimation of strength in different extra Watson-Crick hydrogen bonds in DNA double helices through quantum chemical studies

It was shown earlier, from database analysis, model building studies, and molecular dynamics simulations that formation of cross-strand bifurcated or Extra Watson-Crick hydrogen (EWC) bonds between successive base pairs may lead to extra rigidity to DNA double helices of certain sequences. The strengths of these hydrogen bonds are debatable, however, as they do not have standard linear geometry criterion. We have therefore carried out detailed ab initio quantum chemical studies using RHF/6-31G(2d,2p) and B3LYP/6-31G(2p,2d) basis sets to determine strengths of several bent hydrogen bonds with different donor and acceptors. Interaction energy calculations, corrected for the basis set superposition errors, suggest that N-H...O type bent EWC hydrogen bonds are possible along same strands or across the strands between successive base pairs, leading to significant stability (ca. 4-9 kcal/mol). The N-H...N and C-H...O type interactions, however, are not so stabilizing. Hence, consideration of EWC N-H...O H-bonds can lead to a better understanding of DNA sequence directed structural features.     

Restoration of tensile strength in bark samples of Ficus benjamina due to coagulation of latex during fast self-healing of fissures

Background and Aims

The functions of plant latex have been discussed for a long time. Today, many studies support a defence mechanism as being its main function. A role as a self-healing mechanism was never attributed to the coagulation of latex. In this study we quantified the contribution of the coagulation of Ficus benjamina (weeping fig) latex to a restoration of the mechanical properties of the bark after external lesions.

Methods

Tensile tests of F. benjamina bark were conducted either immediately after injury or at various latency times after injury.

Key Results

A significant increase in the tensile strength of bark samples until 30 min after injury was found, and this effect could be attributed to the coagulation of plant latex alone. The tensile strength remains nearly constant until several hours or days after injury. Then, very probably due to other mechanisms such as cell growth and cell proliferation, the tensile strength begins to increase slightly again.

Conclusions

The coagulation of latex seals lesions and serves as a quick and effective pre-step of subsequent, more effective, long-lasting self-healing mechanisms such as cell growth and proliferation. Thus, a fast self-healing effect can be included in the list of functions of plant latex.     

Studies on the yield and gel strength of agar from Gracilaria domingensis Sonder ex Kuetzing (Gracilariales,Rhodophyta) following the addition of calcium

Studies were carried out on the seasonal variation in yield and gel strength of agar from Gacilaria domingensis with and without the addition of calcium chloride. Extraction was done with and without treatment with 1% hydrochloric acid. The results showed an increase in yield and gel strength when an alkaline solution of calcium was used, but the gel strength was low. For commercial use, Gracilaria domingensis should be mixed with better quality Gracilaria species because of its low gel strength.     

Control of xyloglucan endotransglucosylase activity by salts and anionic polymers

Crude extracts of cauliflower florets had high xyloglucan endotransglucosylase (XET) activity, but this was largely lost after partial purification and de-salting. Activity was restored (promoted up to 40-fold) by any of a wide variety of inorganic and organic salts. Optimum concentrations for Na⁺, K⁺ and NH₄⁺ salts were typically ~300 mM. The chlorides of Ca²⁺, Mg²⁺, Al³⁺ and La³⁺ were optimally active at lower concentrations (e.g. 0.1 mM LaCl₃), but became inhibitory at higher concentrations (e.g. 5 mM LaCl₃). Some anionic polysaccharides at 0.04–0.2% w/v (e.g. gum arabic, pectin and hypochlorite-oxidised xyloglucan) promoted the XET activity of de-salted enzyme, especially if a sub-optimal concentration of NaCl was also present; others (e.g. homogalacturonan, 4-O-methyl-glucuronoxylan and alginate) were inhibitory. Similar ionic effects were noted on the XET activity of the Arabidopsis protein XTH24 (heterologously expressed by insect cells); in this case carboxymethylcellulose was also stimulatory. To look for endogenous modulators of XET activity, we prepared a cold-water extract of cauliflower florets; after boiling and centrifugation, the supernatant [boiled cauliflower preparation (BCP)] promoted the XET activity of de-salted cauliflower enzyme and of XTH24. About half the activator present in BCP was an ethanol-precipitable, anionic polymer of apparent M_r <5,000. After acid hydrolysis the polymer yielded much arabinose and galactose, and small amounts of galacturonic and glucuronic acids amino acids were also present. The polymer may thus contain arabinogalactan-proteins. We suggest that acidic polymers and/or other apoplastic ions are naturally occurring regulators of XET action in vivo, and may thus control cell wall assembly, loosening, and growth.Abbreviations AGP Arabinogalactan-protein - BCP Boiled cauliflower preparation (cold-water-extract of cauliflower florets that was then boiled) - CMC Carboxymethylcellulose - DE Degree of esterification - GalA Galacturonic acid - GlcA Glucuronic acid - K_av Elution volume relative to those of Blue Dextran (K_av=0) and glucose (K_av=1) - TFA Trifluoroacetic acid - V₀ Void volume (centre of elution peak of Blue Dextran) - V_i Totally included volume (centre of elution peak of glucose) - XEH Xyloglucan endohydrolase (activity) - XET Xyloglucan endotransglucosylase (activity) - XLLGol A xyloglucan-derived oligosaccharide, xylose₃·glucose₃·galactose₂·glucitol - XTH Xyloglucan endotransglucosylase/hydrolase (protein) - µ Ionic strength     

Attachment Strength of Listeria monocytogenes and its Internalin-Negative Mutants

A single cell of Listeria monocytogenes attached on food contact surfaces can be a potential source of cross-contamination in a food-processing plant. To see whether internalin A (InlA) and B (InlB), major surface proteins on L. monocytogenes, play a significant role in the attachment process, wild-type L. monocytogenes EGD (LM_EGD) and its isogenic internalin-negative mutants (LM_EGDΔinlA, LM_EGDΔinlB, and LM_EGDΔinlAB) were used to determine attachment strength on inert glass surface. Western blot analysis using InlA and InlB antibodies confirmed the absence of InlA in LM_EGDΔinlA, InlB in LM_EGDΔinlB, and both InlA and InlB in LM_EGDΔinlAB. Regardless of initial attachment numbers, LM_EGD which expressed both InlA and InlB proteins exhibited the strongest attachment strength while the double mutant (LM_EGDΔinlAB) exhibited the weakest. The two single mutants (LM_EGDΔinlA and LM_EGDΔinlB) that expressed only one type of the internalins were shown to have intermediate attachment strength. These results suggest that both InlA and InlB expression play a significant role in the attachment strength of L. monocytogenes on glass surface.     

纳米SiO_2对poss复合树脂弯曲和抗压强度的影响

目的:观察纳米SiO2填料对纳米复合树脂poss的弯曲强度和抗压强度的影响,探究纳米SiO2的最佳添加比。方法:将经过硅烷偶联化的纳米SiO2颗粒加入poss复合树脂中,合成SiO2质量分数分别为0.5%,1%,1.5%和2%的SiO2/poss复合树脂,分别为BCDE四组,纯poss组为A组(对照组)。每组试件固定于万能材料测试机上,以1.0mm/min的速度垂直加压直至试样破坏,采用SPSS16.0软件对结果做单因素方差分析。结果:弯曲强度测试结果:C组最高,与其他四组均有统计学差异(P0.05);A、B、D三组无显著性差异,与E组差异明显(P0.05)。抗压强度测试结果:D组最高,与其他四组均有统计学差异(P0.05);B组和E组与A组差异显著(P0.05),与C组无显著差异。结论:纳米SiO2在一定范围内能够提高poss复合树脂的弯曲强度和抗压强度。     

Physiological factors in stretcher carriage performance

In this study we examined the anthropometric and physiological factors that may account for the ability to carry a casualty on a stretcher. Eleven young soldiers were pretested to obtain their anthropometry, body composition, physical fitness, and muscle cross-sectional areas. They then performed a two-person manual carry of a stretcher containing an 82-kg manikin while walking on a treadmill at a speed of 4.8 km/h. Subjects walked until volitional fatigue, as indicated by slippage of the stretcher from their hands. Average (SD) carriage time was 2.7(1.4) min with a range of 1.4-6.4 min. A stepwise multiple linear regression revealed that forearm bone-plus-muscle cross-sectional area, thigh muscle cross-sectional area, and push-up performance accounted for most of the variance in hand carriage time (r2 = 0.99, P < 0.001). These data suggest that muscle cross-sectional area and upper-body muscular endurance are important physiological factors in the ability to carry a loaded stretcher by hand.     

Does a linear position transducer placed on a stick and belt provide sufficient validity and reliability of countermovement jump performance outcomes?

Manufacturers recommend that linear position transducers (LPTs) should be placed on the side of a barbell (or wooden dowel) to measure countermovement jump (CMJ) height, but the validity and reliability of this placement have not been compared to other attachment sites. Since this recommended attachment site is far from the centre of mass, a belt attachment where the LPT is placed between the feet may increase the validity and reliability of CMJ data. Thirty-six physical education students participated in the study (24.6 ± 4.3 years; 177.0 ± 7.7 cm; 77.2 ± 9.0 kg). Parameters from the two LPT attachments (barbell and belt) were simultaneously validated to force plate data, where the nature of bias was analysed (systematic vs random). The within-session and between-session reliability of both attachment sites were compared to force plate data using a test-retest protocol of two sets of 5 CMJs separated by 7 days. The LPT provided highly reliable and valid measures of peak force, mean force, mean power, and jump height, where the bias was mostly systematic (r² > 0.7; ICC > 0.9). Peak velocity, mean velocity, and peak power were in very good agreement with the force plate and were highly reliable (r² > 0.5; ICC > 0.7). Therefore, both attachment sites produced similar results with a systematic bias compared to force plate data. Thus, both attachment sites seem to be valid for assessing CMJs when the measuring tool and site remain consistent across measurements. However, if LPT data are to be compared to force plate data, recalculation equations should be used.