不同黑莓品种果实形态和硬度分析及其解剖结构和微形态特征观察

以3个黑莓(Rubus spp.)品种‘Arapaho’、‘Boysenberry’和‘Kiowa’的成熟果实为实验材料,对果实的形状指标以及硬度进行了测定,并采用石蜡切片技术和扫描电子显微镜分别对3个品种果实的解剖结构以及外果皮及果肉的微形态特征进行了观察;在此基础上,对果实结构与果实硬度的关系进行了探讨.结果表明:品种‘Arapaho’果实的硬度值(0.79 lb·mm-2)大于品种‘Boysenberry’和‘Kiowa’果实的硬度值(0 lb·mm-2):品种‘Arapaho’果实的纵径、横径和单果质量均极显著小于‘Boysenberry’和‘Kiowa’果实.石蜡切片观察结果显示:3个品种的外果皮均较薄且无角质层覆盖,由1～2层表皮细胞组成;其中,品种‘Arapaho’果实的表皮细胞1层、短小且排列紧密,品种‘Boysenberry’果实的表皮细胞2层、细长且排列疏松整齐,品种‘Kiowa’果实的表皮细胞2层、胞壁有褶皱且果面局部凹陷.品种‘Arapaho’的中果皮由大量较完整的薄壁细胞组成并包含没有解体的维管束,而品种‘Boysenberry’和‘Kiowa’的中果皮内均匀分布着解体的薄壁细胞.扫描电镜观察结果显示:品种‘Boysenberry’外果皮具浅波状纹饰、表皮细胞形状不规则,并具稀疏的表皮毛和片状分泌物;品种‘Kiowa’外果皮表面有明显的不规则波纹状纹饰;品种‘Arapaho’外果皮表面纹理紧凑致密、表皮细胞轮廓清晰且形状规则.3个品种的果肉细胞均呈现不同程度的解体现象,但品种‘Arapaho’的果肉细胞中分布有没有解体的胶状物质.根据观察结果推测:黑莓果实果皮和果肉的解剖结构以及微形态特征与其硬度有一定的关系.     

Solubility and disintegration of a glass ionomer cement

ABSTRACT

The mechanism of erosion of a glass ionomer cement (PR Scell) was studied using two experimental procedures: discs of dental cement were immersed in distilled water under unrenewed conditions as defined by ISO standard or under continuously running distilled water to simulate the oral environment. Both experiments suggest that erosion is important and highly correlated to the cryolithe material included in the formulation of this cement.     

Adsorption of Basic violet 16 from aqueous solutions by waste sugar beet pulp: kinetic,thermodynamic, and equilibrium isotherm studies

Waste sugar beet pulp has been used as adsorbent for the removal of a hazardous cationic dye, Basic violet 16, from its aqueous solution. Adsorption of the dye was studied as function of time, pH of the solution, dosage of the adsorbent, sieve size of the particles, concentration of the dye, and temperature. The initial pH of the dye solution did not affect the chemistry of the dye molecule and the surface of beet pulp. Langmuir and Freundlich adsorption isotherms were successfully employed, and on the basis of these models, the thermodynamic parameters were evaluated. Adsorption of Basic violet 16 on beet pulp was found to be an exothermic reaction. Time contact studies showed that more than 80% adsorption of the dye is achieved in less than 1 h. Kinetics investigations confirmed both pseudo-first-order and pseudo-second-order behaviors; on the other hand, it shows that the intraparticle diffusion step is not the only rate-controlling step in all concentrations.     

Characterization of Carbonic Anhydrase Isozyme CA2, Which Is the CAH2 Gene Product,in Chlamydomonas reinhardtii

From high-CO₂ (5% CO₂) grown unicellular green alga, Chlamydomonas reinhardtii, carbonic anhydrase (CA) was isolated by affinity chromatography and characterized. Isolated CA was identified as an isozyme (CA2) which is the product from the second gene CAH2 by peptide sequencing. The CA2 was inactivated by dithiothreitol. This treatment caused dissociation of CA2 into the large (38 kDa) and small subunits (4243 Da). The molecular mass of the CA2 holoenzyme measured by low-angle laser light-scattering photometry and precision differential refractometry combined with gel-filtration HPLC was 87.9 kDa. These results and gene structure indicate that CA2 is a heterotetramer consisting of two large and two small subunits linked by disulfide bonds like CA1, which is the CAH1 gene product. The speciffc activity of CA2 purified by anion-exchange HPLC was 3300 units per mg protein, which was approximately 1.6 times higher than that of CA1. Therefore, it was concluded that two structurally related isozymes, CA1 and CA2, are present in the wild type cells of C. reinhardtii and differentially regulated by the atmospheric CO₂ concentration.     

上颌第一前磨牙三维模型的建立与研究

目的：建立上颌第一前磨牙三维模型,以辅助牙体解剖学数字化教学和指导临床根管治疗术。方法：对人离体上颌第一前磨牙通过ConebeamCT扫描,获得DICOM格式影像,将获得的影像定位后利用Mimicsl0．0三维重建软件采集牙釉质、牙本质及髓腔的点数据,然后将采集到的点数据导入到MagicslO．0软件进行面网格化,将网格化后的图像标本进行光滑处理后保存,再次利用MimicslO．0三维重建软件进行数据处理,最终获得清晰的牙体及根管系统三维立体图像。结果：准确的建立了包含牙釉质、牙本质、牙髓腔的三维立体模型。结论：本实验方法建立的上颌第一前磨牙的三维模型,具有极高的真实性和精确性,对辅助教学、指导临床根管治疗都具有重要意义。为牙体解剖教学和口腔临床应用提供了一种简捷而精确的建模方法。     

牙科焦虑症治疗方法综述

牙科焦虑症主要是对疼痛的恐惧、对未知的恐惧、对机体受到伤害的恐惧等因素导致的焦虑症状。临床中80%的口腔疾病患者都对治疗心存恐惧,因此在很大程度上不能配合医生的治疗甚至逃避治疗。随着生活水平的不断提高,人们要求在舒适的心理环境中接受治疗,因此牙科焦虑症就成为口腔医护工作者必须面对的问题。治疗牙科焦虑症的方法主要分为行为学,药理学和有机放松法三个大类,在实际使用的过程当中往往是各种方法配合使用,而不是单一使用。随着人们研究的逐步深入,提出的具体治疗方法也越来越多,本文就牙科焦虑症目前所使用的治疗方法做详细的介绍及分类,帮助口腔医护工作人员理清治疗思路,为正确的诊断、干预和治疗牙科焦虑症提供治疗方法。     

Evaluation of dental enamel caries assessment using Quantitative Light Induced Fluorescence and Optical Coherence Tomography

An in vitro study of morphological alterations between sound dental structure and artificially induced white spot lesions in human teeth, was performed through the loss of fluorescence by Quantitative Light‐Induced Fluorescence (QLF) and the alterations of the light attenuation coefficient by Optical Coherence Tomography (OCT). To analyze the OCT images using a commercially available system, a special algorithm was applied, whereas the QLF images were analyzed using the software available in the commercial system employed. When analyzing the sound region against white spot lesions region by QLF, a reduction in the fluorescence intensity was observed, whilst an increase of light attenuation by the OCT system occurred. Comparison of the percentage of alteration between optical properties of sound and artificial enamel caries regions showed that OCT processed images through the attenuation of light enhanced the tooth optical alterations more than fluorescence detected by QLF System.

QLF versus OCT imaging of enamel caries: a photonics assessment     

基于体视显微镜观察两种鼠氟斑牙的形态变化

目的:通过对染氟大鼠和小鼠氟斑牙的观察,进一步确定氟斑牙作为慢性氟中毒的诊断指标的重要性。方法:通过不同浓度和不同时间的氟染毒,利用数码体视显微镜观察Wistar大鼠和C57BL/6J小鼠氟斑牙的形态变化。将Wistar大鼠随机分为4组,每组8只,共计32只,分笼饲养,C57BL/6J小鼠4组,每组12只,共计48只,分8笼饲养。对照组:蒸馏水组,实验组三组:氟化钠分别为50 mg/L组,100 mg/L组和150 mg/L组。在染氟至6个月时,应用在体视显微镜观察大鼠和小鼠牙齿的动态改变。结果:染氟组Wistar大鼠和C57BL/6J小鼠牙齿均出现规则的斑纹、白垩状、延迟断裂、缺损等症状。随着染氟时间的延长,C57BL/6J小鼠氟斑牙的损伤程度大于Wistar大鼠。在慢性氟中毒大鼠和小鼠的牙齿变化中发现,大鼠和小鼠的牙齿变化程度与种属有着密切的关系。结论:通过利用体视显微镜对Wistar大鼠和C57BL/6J小鼠染氟6个月进行氟斑牙的观察分析,为慢性氟中毒鼠模型提供氟斑牙的形态学的详实依据。并且,可根据研究需要适宜选择氟斑牙的动物模型。     

氨基酸的冷电弧-光催化-吸附脱色工艺优化

将TiO2光催化剂负载于活性炭,然后将活性炭装填于冷电弧-光催化-吸附集成反应器中,用该反应器对豆粕氨基酸进行脱色。以豆粕氨基酸的脱色率和氨基酸保留率为指标,探讨处理电压、处理时间、溶液pH和活性炭填充量4个因素对脱色效果的影响。在单因素试验的基础上,利用二次回归正交旋转组合设计建立回归模型方程确定最佳工艺条件,并对方程进行回归分析和系数检验。结果表明:回归方程在#=0.01水平上高度显著。各因素对脱色效果的影响程度大小依次为:溶液pH>活性炭填充量>处理时间>处理电压。最佳脱色条件为处理电压20kV、处理时间11min、溶液pH 3.6和活性炭填充量63g,此条件下氨基酸溶液脱色率为94.8%,保留率为83.1%。