Auditory memory for temporal characteristics of sound

This study evaluates auditory memory for variations in the rate of sinusoidal amplitude modulation (SAM) of noise bursts in the European starling (Sturnus vulgaris). To estimate the extent of the starling’s auditory short-term memory store, a delayed non-matching-to-sample paradigm was applied. The birds were trained to discriminate between a series of identical “sample stimuli” and a single “test stimulus”. The birds classified SAM rates of sample and test stimuli as being either the same or different. Memory performance of the birds was measured as the percentage of correct classifications. Auditory memory persistence time was estimated as a function of the delay between sample and test stimuli. Memory performance was significantly affected by the delay between sample and test and by the number of sample stimuli presented before the test stimulus, but was not affected by the difference in SAM rate between sample and test stimuli. The individuals’ auditory memory persistence times varied between 2 and 13 s. The starlings’ auditory memory persistence in the present study for signals varying in the temporal domain was significantly shorter compared to that of a previous study (Zokoll et al. in J Acoust Soc Am 121:2842, 2007) applying tonal stimuli varying in the spectral domain.     

Delayed luminescence of Prorocentrum minimum under controlled conditions

Delayed luminescence (DL), also termed delayed fluorescence or delayed light emission, is the phenomenon of long-lived light emission by plants and cyanobacteria after being illuminated with light and put into darkness. Culture growth of three Prorocentrum minimum strains was studied with DL measurements. DL decay kinetics was measured from 1–60 s after a pulse of white light. The strains used were from the Adriatic Sea (PmK), from Chesapeake Bay, USA (D5), and from the Baltic Sea (BAL), cultured at salinity of 32, 16, and 8 (practical salinity scale), respectively. The strains differed in cell size and chlorophyll a content (PmK > D5 > BAL), as well as in DL parameters. The DL results were compared to standard measurements of culture density and carbon content (calculated from biovolumes). DL decay curves had a specific peak, which changed with culture growth and showed more similarities between the strains PmK and D5. The DL intensity increased with cell density and carbon content in a two-stage process, corresponding to the lag and exponential phases of growth. DL intensity was best correlated with carbon content irrespective of strain and is proposed as an estimate of biomass and for differentiating between lag and exponential phases of growth.     

A comparison of the growth of radio-tagged and dye-marked pike

Radio-tagged and dye-marked adult pike Esox lucius L. were recaptured in a reservoir 1 year after tagging. There was no significant difference in length or weight growth rate between the two groups of fish and no change in their condition factor.     

Preliminary fabrication and characterization of electron beam melted Ti–6Al–4V customized dental implant

The current study was aimed to fabricate customized root form dental implant using additive manufacturing technique for the replacement of missing teeth. The root form dental implant was designed using Geomagic™ and Magics™, the designed implant was directly manufactured by layering technique using ARCAM A2™ electron beam melting system by employing medical grade Ti–6Al–4V alloy powder. Furthermore, the fabricated implant was characterized in terms of certain clinically important parameters such as surface microstructure, surface topography, chemical purity and internal porosity. Results confirmed that, fabrication of customized dental implants using additive rapid manufacturing technology offers an attractive method to produce extremely pure form of customized titanium dental implants, the rough and porous surface texture obtained is expected to provide better initial implant stabilization and superior osseointegration.     

HYPERSENSITIVITY OF MELATONIN SUPPRESSION IN RESPONSE TO LIGHT IN PATIENTS WITH DELAYED SLEEP PHASE SYNDROME*

Patients with delayed sleep phase syndrome (DSPS) experiencea chronic mismatch between the usual daily schedule required by the individual'senvironment and their circadian sleep-wake pattern, resulting in major academic,work, and social problems. Although functional abnormalities of the circadianpacemaker system have been reported in patients with DSPS, the etiology ofDSPS has not been fully elucidated. One hypothesis proposed to explain whypatients with DSPS fail to synchronize their 24h sleep-wake cycle to theirenvironment is that they might have reduced sensitivity to environmental timecues, most notably light-dark cycles. Therefore, we compared the sensitivityof melatonin suppression in response to light in patients with DSPS and normalcontrol subjects. Fifteen patients with DSPS and age- and sex-matched healthycontrols were studied. As the melatonin secretion rhythm in patients withDSPS was expected to be delayed compared to the controls, the time of peakmelatonin secretion was determined in each subject in the first session. Inthe second session, each subject was exposed to light with an intensity of1000 lux for 2h beginning 2h prior to his or her peak melatonin secretion.Melatonin was measured by radioimmunoassay in saliva sampled every 30 minutesduring the period of light exposure. Suppression of the melatonin concentrationin saliva was dependent on duration of light exposure. In addition, the suppressiveeffect of light on the melatonin concentration was significantly greater inpatients with DSPS than in control subjects. The results suggest hypersensitivityto nighttime light exposure in patients with this syndrome. Our findings thereforesuggest that evening light restriction is important for preventing patientswith DSPS from developing a sleep phase delay. (ChronobiologyInternational, 18(2), 263–271, 2001)     

Finite element modelling of implant designs and cortical bone thickness on stress distribution in maxillary type IV bone

The aims of this study were to examine the effect of implant neck design and cortical bone thickness using 3D finite element analysis and to analyse the stability of clinical evidence based on micromotion and principal stress. Four commercial dental implants for a type IV bone and maxillary segments were created. Various parameters were considered, including the osseointegration condition, loading direction and cortical bone thickness. Micromotion and principal stresses were used to evaluate the failure of osseointegration and bone overloading, respectively. It was found that the maximum stress of the peri-implant bone decreased as cortical bone thickness increased. The micromotion level in full osseointegration is less than that in non-osseointegration and it also decreases as cortical bone thickness increases. The cortical bone thickness should be measured before surgery to help select a proper implant. In the early stage of implantation, the horizontal loading component induces stress concentration in bone around the implant neck more easily than does the vertical loading component, and this may result in crestal bone loss.     

Rats' memory for event duration: differential effects of delaying the discriminative choice cue as opposed to the opportunity to execute the choice response

Rats were trained to discriminate short or long durations of houselight illumination using a choice procedure. During the test phase of each trial, the left and right levers were presented with an auditory cue above one of them on (cued lever) while the other was off (uncued lever). The auditory cue was presented immediately after sample offset and the levers were inserted after the auditory cue had been presented for 2 s. For half of the rats, the correct response following the short sample was to press the cued lever, while following the long sample, it was to press the uncued lever. This was reversed for the remaining rats. Following acquisition of the discrimination, two different types of delay tests were administered. In the first set, the delay between offset of the sample and onset of the auditory cue was manipulated (Cue Delay Test). In the second set, the delay between onset of the auditory cue and entry of the levers into the chamber was manipulated (Response Delay Test). Cue Delay testing resulted in a choose-long bias at the longer delays. Response Delay testing did not result in a systematic response bias and there was little forgetting over the delay interval. These data suggest that the rats did not stop the internal clock when the nominal sample was offset, but allowed it to keep running until the auditory cue was presented. The data from the Response Delay Test indicate that either a response decision was made based on the clock reading as soon as the auditory cue was presented, or the clock reading itself was retained over the delay with no subjective shortening and little forgetting.     

Retention of visible implant and visible implant elastomer tags in brown trout in an English chalk stream

Retention of both rigid and new soft standard size visible implant (VI) tags in brown trout Salmo trutta after 6 months varied between 42 and 97% for different batches, with no evidence of increased retention of the new type of tag. The 6 month retention of visible implant elastomer tags (VIE) also varied but with a mean of 96%. The VIE retention gradually declined with time up to 42 months.     

The effect of seasonal variation in selective feeding by zebra mussels (Dreissena polymorpha) on phytoplankton community composition

1. To investigate the impact of zebra mussels ( Dreissena polymorpha ) on phytoplankton community composition, temporal variability in selective feeding by the mussels was determined from April to November 2005 in a natural lake using Delayed Fluorescence (DF) excitation spectroscopy.
2. Selective grazing by zebra mussels varied in relation to seasonal phytoplankton dynamics; mussels showed a consistent preference for cryptophytes and avoidance of chlorophytes and cyanobacteria. Diatoms, chrysophytes and dinoflagellates responded differentially to zebra mussel grazing depending on their size. Analysis of excreted products of the zebra mussels revealed that in addition to chlorophytes and cyanobacteria, phytoplankton >50  μ m and very small phytoplankton (≤7  μ m) were largely expelled in pseudofaeces.
3. The zebra mussel is a selective filter-feeder that alters its feeding behaviour in relation to phytoplankton composition to capture and ingest high quality phytoplankton, especially when phytoplankton occur in preferred size ranges. Flexibility of zebra mussel feeding behaviour and variation in susceptibility among phytoplankton groups to mussel ingestion indicate that invading zebra mussels could alter phytoplankton community composition of lakes and have important ecosystem consequences.