Direct Correlation of the Organic Solar Cell Device Performance to the In‐Depth Distribution of Highly Ordered Polymer Domains in Polymer/Fullerene Films

This study correlates the device performance of organic solar cells and the electronic charge transport within polymer/fullerene films, directly to the optical order of the polymer. The optical order was measured by spectroscopic ellipsometry and evaluated by our previously derived model. We were able to determine the in‐depth distribution of higher and lower ordered poly(3‐hexylthiophene) (P3HT) domains within an [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) matrix. The over the film thickness integrated volume fraction of highly ordered P3HT domains could be directly correlated to the corresponding solar cell device performance. We are able to describe various thermally annealing conditions between room‐temperature and 200 °C.     

Cu2‐xS Surface Phases and Their Impact on the Electronic Structure of CuInS2 Thin Films – A Hidden Parameter in Solar Cell Optimization

The surface properties of CuInS₂ (CIS) thin‐film solar cell absorbers are investigated by a combination of electron and soft X‐ray spectroscopies. Spatially separated regions of varying colors are observed and identified to be dominated by either CuS or Cu₂S surface phases. After their removal by KCN etching, the samples cannot be distinguished by eye and the CIS surface is found to be Cu‐deficient in both regions. However, a significantly more pronounced off‐stoichiometry in the region initially covered by Cu₂S can be identified. In this region, the resulting surface band gap is also significantly larger than the E_g^Surf of the initially CuS‐terminated region. Such variations may represent a hidden parameter which, if overlooked, induces irreproducibility and thus prevents systematic optimization efforts.     

Precursor Decomposition,Microstructure, and Porosity of Yttria Stabilized Zirconia Thin Films Prepared by Aerosol‐Assisted Chemical Vapor Deposition

Microstructures of yttria stabilized zirconia thin films deposited by aerosol assisted chemical vapor deposition (AA‐CVD) are correlated with the thermal decomposition behavior of the corresponding metal precursors, zirconium and yttrium 2,4‐pentanedionate. Process conditions of AA‐CVD are investigated with the aim of producing dense and compact YSZ thin films for applications as gas‐tight electrolyte. Based on systematic cross sectional scanning transmission electron microscopy (STEM) investigations and conductivity measurements, the development of percolating nanoporosity is observed in samples prepared at temperatures between 350 °C and 600 °C at standard solution throughput. Compact columnar thin films with bulk conductivity are obtained at 600 °C by reducing the metal content of the precursor solution and at 450 °C by reducing the solution throughput.     

Seismic Survey Design and Effects on Maternal Polar Bear Dens

Large-scale industrial activities can have negative effects on wildlife populations. Some of these effects, however, could be reduced with effective planning prior to development. The Coastal Plain of the Arctic National Wildlife Refuge, in northeastern Alaska, USA, is an important maternal denning area for polar bears (Ursus maritimus). Recent legislation has opened the area for potential oil and gas development. As a result, there is interest in conducting winter seismic surveys across the area that could disturb denning female polar bears and lead to decreased cub survival. We sought to demonstrate how different seismic survey designs, with and without aerial den detection surveys, could affect the level of potential effect on denning polar bears during spring (Feb–Apr). We developed 5 hypothetical seismic survey designs for a portion of the Coastal Plain ranging from no spatial or temporal restrictions on activities to explicit consideration of when and where operations can occur. We evaluated how many dens might be disturbed by seismic surveys and the average distance activity came within simulated polar bear dens. Survey design had a large effect on the estimated number of dens that could be disturbed; the scenario with the highest spatial and temporal specificity reduced the number of dens disturbed by >90% compared to the scenario with no restrictions on when and where activity could occur. The use of an aerial den detection survey prior to seismic activity further reduced the number of dens disturbed by 68% across all scenarios. The scenario with the highest spatial and temporal specificity always had the lowest level of disturbance for all scenarios with and without the aerial survey included. Our study suggests that large reductions in the probability of disturbance can occur through careful planning on the timing and distribution of proposed activities even when surveys are planned in areas with a high density of polar bear dens. Published 2019. This article is a U.S. Government work and is in the public domain in the USA. The Journal of Wildlife Management published by Wiley Periodicals, Inc. on behalf of The Wildlife Society.     

Conditioning of surfaces by macromolecules and its implication for the settlement of zoospores of the green alga Ulva linza

Conditioning, ie the adsorption of proteins and other macromolecules, is the first process that occurs in the natural environment once a surface is immersed in seawater, but no information is available either regarding the conditioning of surfaces by artificial seawater or whether conditioning affects data obtained from laboratory assays. A range of self-assembled monolayers (SAMs) with different chemical terminations was used to investigate the time-dependent formation of conditioning layers in commercial and self-prepared artificial seawaters. Subsequently, these results were compared with conditioning by solutions in which zoospores of the green alga Ulva linza had been swimming. Spectral ellipsometry and contact angle measurements as well as infrared reflection absorption spectroscopy (IRRAS) were used to reveal the thickness and chemical composition of the conditioning layers. The extent that surface preconditioning affected the settlement of zoospores of U. linza was also investigated. The results showed that in standard spore settlement bioassays (45–60 min), the influence of a molecular conditioning layer is likely to be small, although more substantial effects are possible at longer settlement times.     

Review – Interactions between diatoms and stainless steel: focus on biofouling and biocorrosion

There is a considerable body of information regarding bacterially enhanced corrosion, however, this review focuses on diatoms (unicellular algae) whose contribution to biocorrosion is less well studied. The reasons why diatoms have been neglected in studies of biocorrosion in natural waters are discussed and the question whether diatoms should be considered as inert with respect of electrochemical processes is considered. A particular focus is given to the case of stainless steels (SS), which are widely used in variety of applications in natural waters. Basic information on the cell biology of diatoms is included in the review, particularly with respect to their ability to ‘sense’ and adhere to surfaces. Investigations at the nanoscale are reviewed as these studies provide information about the behavior of cells at interfaces. Recent advances include the use of atomic force microscopy (AFM), although only a few studies have been applied to diatoms. Regarding the electrochemical behavior of SS, the mechanisms by which diatoms influence the potential ennoblement process is discussed. Such studies reveal the association of diatoms, in addition to bacteria, with biocorrosion processes.     

Lubrication and load-bearing properties of human salivary pellicles adsorbed ex vivo on molecularly smooth substrata

In a series of Surface Force Balance experiments, material from human whole saliva was adsorbed to molecularly smooth mica substrata (to form an ‘adsorbed salivary film’). Measurements were taken of normal (load bearing, F _n) and shear (frictional, F _s*) forces between two interacting surfaces. One investigation involved a salivary film formed by overnight adsorption from undiluted, centrifuged saliva, with the adsorbed film rinsed with pure water before measurement. Measurements were taken under pure water and 70 mM NaNO₃. In a second investigation, a film was formed from and measured under a solution of 7% filtered saliva in 10 mM NaNO₃. F _n results for both systems showed purely repulsive layers, with an uncompressed thickness of 35–70 nm for the diluted saliva investigation and, prior to the application of shear, 11 nm for the rinsed system. F _s* was essentially proportional to F _n for all systems and independent of shear speed (in the range 100–2000 nm s^?1), with coefficients of friction  μ ～ 0.24 and μ ～ 0.46 for the unrinsed and rinsed systems, respectively. All properties of the rinsed system remained similar when the pure water measurement environment was changed to 70 mM NaNO₃. For all systems studied, shear gave rise to an approximately threefold increase in the range of normal forces, attributed to the ploughing up of adsorbed material during shear to form debris that stood proud of the adsorbed layer. The results provide a microscopic demonstration of the wear process for a salivary film under shear and may be of particular interest for understanding the implications for in vivo oral lubrication under conditions such as rinsing of the mouth cavity. The work is interpreted in light of earlier studies that showed a structural collapse and increase in friction for an adsorbed salivary film in an environment of low ionic strength.     

Ratatouille: An Animated Account of Cooking,Taste, and Human Evolution

This paper analyzes the immensely popular animated film Ratatouille as a social and cultural document. It begins with a recapitulation of the movie's story line – a saga of an astute, ambitious and talented rat, who becomes transformed into an accomplished haute cuisine chef. The film illustrates recent anthropological writings on the central role of cooking in human evolution. It also shows how varieties of cooking and table manners provide key indications of the civilizing process. Ultimately, Ratatouille explores distinctions and similarities between “man and beast”. It communicates the idea that all living creatures share more in terms of aptitude and feeling than divides them.