Bottom-up derivation of discrete-time population models with the Allee effect

This paper presents a framework in which various single-species discrete-time population models exhibiting the Allee effect are derived from first principles. Here, the Allee effect means a reduction in individual fitness at low population sizes. The derivation is based on the distribution of female and male individuals among discrete resource sites, in addition to competitive and cooperative interaction among individuals. These derivations show how the derived population models depend on the type and the intensity of competition, and the degree of clustering of individuals. Along with these models exhibiting the Allee effect, this paper also presents first-principles derivation of population models without the Allee effect which include a parameter relating to the intensity of competition.     

中国旧石器文化的“西方元素”与早期人类文化进化格局

本文回顾和分析中国旧石器研究史上有关"西方元素"即西方旧石器文化标志性技术和工具问题的争论,得出三点结论:1)"西方元素"在中国旧石器文化中是与西方同类技术和工具大体同步出现的客观现象,两者无本质差别;2)和西方一样,中国旧石器的"西方元素"也有重叠与穿时性.这使得旧大陆两侧的旧石器文化连成一体,难分东西;3)基于以上事实,本文作者倾向于认为:迄今已知的旧大陆旧石器文化是过去200多万年间早期人类在进化过程中应对全球气候波动引起的生态环境变迁而反复进行的横贯大陆的双向迁移、交流与融合的结果.     

Long-term recovery of macroinvertebrate biota in grossly polluted streams: Re-colonisation as a constraint to ecological quality

To meet targets imposed by the European Water Framework Directive (2000/60/EC) it is vital that measures to improve the status of rivers are both effective and economically viable. Achievement of such aims needs robust understanding of biological responses to changes in water quality vis-à-vis mechanisms of and constraints to the colonization of previously polluted sites. This study therefore examined the long-term chemical and biological changes in historically polluted rivers to elucidate the responses of macroinvertebrate biota to improvements in chemical water quality. For three historically polluted sites in the English Midlands, data from surveys over a period of ca. 50 years were analysed. Ammonia (NH₃) and 5-day biochemical oxygen demand (BOD₅) were used as chemical water quality indicators. Variations in the ecological recovery of the study sites were assessed using an average pollution sensitivity score (Average Score Per Taxon) and the number of taxa present (usually to family level) present in hand-net samples. Ecological recovery varied widely and was influenced by the intensity and spatial extent of the pollution and the proximity of available sources of potential colonisers. At the site most isolated from potential sources of colonizing taxa, no clean-water macroinvertebrate taxa were recorded 30 years after the major sources of pollution ceased. Where clean-water colonisers were more readily available, significant improvements in ecological quality followed within 2–5 years of the improvements in chemical quality. Macroinvertebrate communities and hence monitoring data may thus be indicative of long past conditions or of biological isolation rather than contemporaneous chemical conditions. Combined chemical and biological data were used to explore a generic model for predicting recovery rates and success. Neither BOD₅ nor NH₃ were found to provide a consistent and meaningful prediction of either average pollution tolerance of macroinvertebrate taxa or of the number of taxa present. Long-term relationships between macroinvertebrate variables and chemical water quality variables, however, were non-linear, suggesting that water quality thresholds may have to be exceeded before biological recovery can occur. Even when chemical water quality has been improved substantially, the apparent ecological status of macroinvertebrate communities may not reflect reduced pollution levels attained until adequate time to allow for re-colonisation (possibly decades) has elapsed.     

Can we measure ecological sustainability? Landscape pattern as an indicator for naturalness and land use intensity at regional,national and European level

European landscapes have been shaped over the centuries by processes related to human land use, which are reflected in regionally distinct landscape patterns. Since landscape pattern has been linked to biodiversity and other ecological values of the landscapes, this paper explores landscape pattern as a tool for ecological sustainability assessments at the regional (Austrian Cultural Landscapes), national (Austria) and European (European Union + Norway, Switzerland) level with focus on agricultural landscapes. A set of landscape metrics served as a basis to assess naturalness and geometrisation of Austrian and European landscapes as a proxy for their sustainability. To achieve an accurate spatially explicit assessment, we applied a spatial reference framework consisting in units that are homogeneous in biophysical and socio-economic contexts, adapted the regional approach for its application at European level, and developed relative sustainability thresholds for the landscape metrics. The analyses revealed that several landscape metrics, particularly the “Number of Shape Characterising Points” showed a high correlation with the degree of naturalness. The sustainability map of Austria based on an ordinal regression model revealed well-known problem regions of ecological sustainability. At the European level, the relative deviation from the average pattern showed clearly the simplification processes in the landscapes. However, a better spatial resolution of land cover data would add to the refinement of pattern analysis in regions and therefore the assessment of sustainability. We recommend the combination of information of different scales for the formulation and implementation of sustainability policies.     

Impacts of human activity on environment in the high-cold pasturing area: A case of Gannan pasturing area

Identifying the specific forces driving environmental impact is a hot topic in the field of sustainable development in the pasturing area. In the paper, the ecological footprint was taken as the index of environmental impact, and a series of index like population quality, prosperous, using intensity, livelihood tactics are considered as the main human factors. Using the STIRPAT model and temporal series data from 1980 to 2007, the author analyzes the effects of the human driving forces of environmental impact.
The ecological footprint method presents a simple framework for national natural capital accounting, and it has been used as a comprehensive index of human activity impact, which indirectly reflect human activity’s pressure on the environment. Our analyses showed that the ecological footprint increased from 238736.9 to 877716.1 ha and per capital ecological footprint also increased from 0.854 to 1.961 ha/per during 1980–2007 in Gannan pasturing area. However, in the meantime, the ecological footprint intensity was inclined from 25.396 to 3.025 ha/ten thousand yuan.
With a view of dismantling the human driving forces of ecological footprint, the modified IPAT-called STIRPAT has been employed as a common analytic framework. Our analyses showed that population quantity and using intensity was a major driver of ecological footprint, their coefficients were greater than 1.0 in model (1); In addition, promoting the prosperous lever and the primary industry proportion, the impact of environment will be increased, but their coefficients are less than 1.0 in model (1). At the same time, the technological eco-efficiency of sample regions was discussed in details, the range ability of the technological eco-efficiency was wider, and 15 years went beyond the average level, but the other was less than the average level. Another important finding in the empirical study is that there are some evidences of an environmental Kuznets curve for ecological footprint within the range of calculated data. Some potential improvements in some further researches and suggestions to alleviate the environment pressure, and it is put forward in the last section.     

New yttrium(III) and copper(II) coordination polymers with partially protonated cyclohexane-1,2,3,4,5,6-hexacarboxylato ligands: Synthesis, crystal structures and properties

Two coordination polymers, [Y(H₂O)₄(H₃chhc)]·6H₂O (1) and [Cu₅(H₂O)₁₀(Hchhc)₂]·4H₂O (2) with H₆chhc = cyclohexane-1,2,3,4,5,6-hexacarboxylic acid) represent rare examples of metal complexes with partially protonated cyclohexane-1,2,3,4,5,6-hexacarboxylato ligands. The [Y(H₂O)₄]³⁺ units in 1 are interlinked by the triprotonated (H₃chhc)³⁻ anions in a η⁵μ₄ bridging mode to form 2D (4³)₂(4⁶·6⁶·8³) topological networks, which are stacked along [0 1 0] direction in ···ABAB··· fashion with the lattice H₂O molecules sandwiched between layers. The pentameric [Cu₅(H₂O)₁₀]¹⁰⁺ units in 2 are bridged by monoprotonated (Hchhc)⁵⁻ anions in a η⁸μ₆ fashion to generate a 3D MOF of an unprecendented (4³)(4⁵·6⁷·8³) topology with the lattice H₂O molecules in channels. The temperature-dependent magnetic susceptibility data of 2 could be modeled to a combination of a linear chain of equally-spaced Cu(II) ions (J₁ = 1.86 cm⁻¹) with an isosceles triangular Cu₃ unit (J₂ = 5.86 cm⁻¹).     

The effect of reaction conditions on the nature of cadmium 1,3,5-benzenetricarboxylate metal-organic frameworks

The product from the reaction between Cd(NO₃)₂·4H₂O and 1,3,5-benzenetricarboxylic acid (H₃btc) in DMF at 95 °C depends on the reaction time, with [Cd(Hbtc)(H₂O)₂] 1 and [Cd(Hbtc)(DMF)₂] 2 isolated after heating for 10 min, the latter after standing the solution for 1-2 weeks at room temperature. [Cd₃(btc)₂(H₂O)₉]·4H₂O 3 was isolated after heating for 1 h, whereas [Cd₁₂(btc)₈(DMF)₁₄(OH₂)₂]·1.5DMF 4 was isolated after heating for 2 days. Compounds 1 and 3 have been previously reported, whereas 2 and 4 are both new. Compound 2 adopts a two-dimensional sheet structure, with the coordinated DMF ligands projecting from both sides of the sheets, whereas 4 has a complex three-dimensional structure related to the fsc net. When the reaction was repeated in the presence of pyrazine (pyz), the product [Cd(Hbtc)(pyz)(DMF)]·DMF 5 was isolated as a minor compound. Compound 5 has a two-dimensional structure, with Cd-Hbtc zig-zag chains linked into sheets through the pyrazine ligands.     

A carbohydrate-rich diet increases social immunity in ants

Increased potential for disease transmission among nest-mates means living in groups has inherent costs. This increased potential is predicted to select for disease resistance mechanisms that are enhanced by cooperative exchanges among group members, a phenomenon known as social immunity. One potential mediator of social immunity is diet nutritional balance because traits underlying immunity can require different nutritional mixtures. Here, we show how dietary protein–carbohydrate balance affects social immunity in ants. When challenged with a parasitic fungus Metarhizium anisopliae, workers reared on a high-carbohydrate diet survived approximately 2.8× longer in worker groups than in solitary conditions, whereas workers reared on an isocaloric, high-protein diet survived only approximately 1.3× longer in worker groups versus solitary conditions. Nutrition had little effect on social grooming, a potential mechanism for social immunity. However, experimentally blocking metapleural glands, which secrete antibiotics, completely eliminated effects of social grouping and nutrition on immunity, suggesting a causal role for secretion exchange. A carbohydrate-rich diet also reduced worker mortality rates when whole colonies were challenged with Metarhizium. These results provide a novel mechanism by which carbohydrate exploitation could contribute to the ecological dominance of ants and other social groups.     

Carbon‐Coated Li3Nd3W2O12: A High Power and Low‐Voltage Insertion Anode with Exceptional Cycleability for Li‐Ion Batteries

The synthesis of carbon‐coated Li₃Nd₃W₂O₁₂ (C‐Li₃Nd₃W₂O₁₂), a low voltage insertion anode (0.3 V vs. Li) for a Li‐ion battery, is reported to exhibit extraordinary performance. The low voltage reversible insertion provides an increase in the energy density of Li‐ion power packs. For instance, C‐Li₃Nd₃W₂O₁₂ delivered an energy density of ≈390 Wh kg^?1 (based on cathode mass loading) when coupled with an LiMn₂O₄ cathode with an operating potential of 3.4 V. Furthermore, excellent cycling profiles are observed for C‐Li₃Nd₃W₂O₁₂ anodes both in half and full‐cell configurations. The full‐cell is capable of delivering very stable cycling profiles at high current rates (e.g., 2 C), which clearly suggests the high power capability of such garnet‐type anodes.