Canine teeth of bats (Microchiroptera): size, shape and role in crack propagation

Upper canines in microchiropteran bats show a variety of cross-sectional shapes. A consistent feature of all species studied here is that the tooth is edged and not simply round or oval. Prominent sharp edges are positioned in several directions but particularly antero-medially toward the incisors and posteriorly toward the premolars. These edges appear to direct the cracks made in food items to the incisors or to the premolars. A continuous cutting edge is apparent in the occlusal view of the palate running from tip of canine to the ectoloph of the molars. Size and shape analysis indicates that larger bats have slender, rather than stouter, canines for their height, a condition that may be attributable to the nature of the prey. Most bats take prey that have little hard substance imbedded within. The compromises in tooth shape may vary between that of a terrestrial predator with short, conical canines for processing endoskeletal prey to that of a small flying predator with long, slender, edged canines for capturing and processing exoskeletal prey. Unicuspid teeth and how they might function in food break-up have been overlooked to the literature; such a study could lead to an understanding of how more complex teeth function.     

The root: a potential new source of competent cells for high-frequency regeneration in Tylophora indica

The purpose of this study was to develop a new micropropagation system for Tylophora indica, an important medicinal plant in India, using root explants as starting material. Root explants cultured on MS medium supplemented with 6-benzyladenine (BA) or 2-isopentyladenine (2iP) produced organogenic nodular meristemoids (NMs) within 4 weeks. NMs induced from the cut ends of root segments showed two types of organogenic response—direct shoot bud formation and somatic embryogenesis—when maintained on induction medium. In 42% of the explants, NMs developed shoot buds directly in the presence of 10.72–26.80 M BA. On average, 18.5±0.7 shoots per gram of NM tissue were obtained after each 4-week subculture. Elongation of microshoots and root initiation were correlated with the auxin used, with the optimal response occurring in the presence of 28.54 M indole-3-acetic acid. In 39% of the explants, NMs dedifferentiated into friable embryogenic callus (FEC) in the presence of BA or 2iP after 12 weeks of culture. Of the different treatments, MS medium supplemented with 10.72 M BA was the most effective in inducing FEC and somatic embryogenesis: at this concentration 64% of the cultured NMs developed FEC and, on the same medium, 89% of the FEC produced globular somatic embryos (SEs). FEC biomass increased nearly five-fold with every 4-week subculture, and about 30 SEs were recovered per gram of FEC during this period. The best conversion of mature SEs to complete plantlets was obtained on basal MS medium–42%. Plantlets derived via somatic embryogenesis and shoot organogenesis were successfully hardened (88–96%) and transferred to the field.Abbreviations BA: 6-Benzyladenine - 2,4-D: 2,4-Dichlorophenoxyacetic acid - FEC: Friable embryogenic callus - GRS: Green root segment - IAA: Indole-3-acetic acid - IBA: Indole-3-butyric acid - 2ip: 2-Isopentyladenine - Kin: Kinetin - NAA: -Naphthaleneacetic acid - NM: Nodular meristemoid - SE: Somatic embryo - WRS: White root segmentCommunicated by P. Lakshmanan     

Approaches on vegetative propagation of difficult-to-root <Emphasis Type="Italic">Salix caprea</Emphasis>

In the framework of a willow rust research project, it was necessary to include vegetatively propagated plant material of selected sallow trees (Salix caprea L.) into biotests for identification of pathotypes. Since it was not possible to root sufficient clonal plants by conventional cutting propagation, the applicability of tissue culture methods was tested. From 10 selected donor trees of Salix caprea newly sprouted shoots were harvested and transferred to nutrient media after surface disinfection. The cultures were grown at 20--22 °C, illuminated with warm-white fluorescent tubes. The majority of shoot tips and nodal segments died during the first month, but only with nursery-grown plants this was caused by bacteria contamination. Two clones could be established easily on hormone-free medium. Five clones could be initiated only after repeated subcultures on various media variants. Three clones failed completely. Different basic media compositions were tested and Woody Plant Medium, supplemented with 0.1% activated charcoal, proved to be best for most of the sallow clones. Well developed rooted plantlets were used in vitro for microcutting propagation. The resulting plants were transferred to soil and could be included in the rust screening program after acclimatising. The applicability of micropropagation for selected Salix caprea donor trees was strongly depending on the genotype. But the comparison of results from microcuttings with conventional cutting propagation showed that these methods were successful for different clones each.     

Surface porous fibre-reinforced composite bulk bone substitute

The aim of this study was to describe and evaluate the significance of a porous surface with bioactive glass granules (S53P4) covering an artificial bulk material based on polymethylmetacrylate (PMMA) and fibre-reinforced composite (FRC) technology. Effort was focused particularly on characters of the porous surface and biomechanical properties of the material in vitro, and test in vivo the implant in reconstruction in an experimental long bone segment defect model. The defect, 10 mm in length, created in the shaft of rabbit tibia, was reconstructed by the implant and fixed by intramedullary K-wires. The implant was incorporated within 4 weeks by new bone growth from the host bone covering particularly its posterior surface and cortex/implant junctions with bridging trabecular bone. Later, at 8 weeks, new bone was found also at the cortex/implant interface and in the medullary canal of the implant. Histometric measurements revealed direct bone/implant surface contact in 34% at the interface. Bioactive glass granules in the porous surface evoked the most direct contact with bone. The implants manufactured from PMMA only served as a control group, and showed significantly lower osteoconductive properties. Biomechanical measurements in vitro of fibre-reinforced PMMA specimens revealed values for bending strength and the flexural modulus to match them to human bone. This artificial bulk bone material based on PMMA/FRC technology seems to have proposing properties to be used as a bone substitute on load-bearing conditions. This revised version was published online in July 2006 with corrections to the Cover Date.     

Rapid Axillary Bud Proliferation and ex vitro Rooting of Eupatorium triplinerve

Effective protocol was established for micropropagation of the medicinal plant Eupatorium triplinerve Vahl through rapid axillary bud proliferation and ex vitro rooting. Murashige and Skoog (MS) medium fortified with 8.87 M benzylaminopurine (BAP) and 2.46 M indole-3-butyric acid (IBA) was the best for axillary bud proliferation and developed a mean of 8.1 shoots per node. Excision and culture of the node segments of the in vitro shoots on medium supplemented with the same concentration of growth regulators developed more than 30 shoots within 40 d. Shoot multiplication did not exhibit decrease in the number of shoots even at 7^th subculture. Dipping of the basal end of shoots in 2.46 M IBA solution for 10 d induced roots and its transfer to small pots facilitated the survival of all rooted shoots (100 %). Ex vitro rooting by direct transfer of the shoots from multiplication medium showed 92 % survival.     

Large-scale propagation of a replication-defective adenovirus vector in stirred-tank bioreactor PER.C6 cell culture under sparging conditions

Large-scale propagation of replication-defective adenovirus vectors has not been well studied to date. One of the challenges for efficient propagation at large scale is to overcome the sensitivity of virus infected cells to gas sparging required for oxygenation and CO(2) removal. In our initial experiments, it was observed that productivity of an adenovirus vector was significantly reduced under sparging conditions as compared to nonsparged, i.e., surface-aerated controls in serum-free cultures. Investigations led to the identification of a buffer containing surfactant (Polysorbate-80, PS-80) that was included in the virus seed stock formulation and introduced through virus infection into the culture at a very low concentration as the cause of the reduced virus productivity. This finding was not obvious and trivial, as neither uninfected sparged nor infected nonsparged PER.C6 trade mark cells in serum-free cultures were affected by the buffer at such a low PS-80 concentration of 0.00025% (v/v), which is a common component of serum-free cell culture media. These results strongly suggest that virus-infected cells behave very differently from uninfected cells under sparging conditions. To mitigate the deleterious effects of sparging, the virus seed stock was prepared in the absence of the buffer containing PS-80. At the same time, the concentration of Pluronic-F68 (PF-68) in the serum-free medium was increased to 1 g/L, at which cell growth and metabolism were unaffected, even though this measure alone did not result in virus productivity improvement. Only by implementing the two measures together was virus productivity loss completely eliminated under sparging conditions. After demonstration of the process robustness in 2-L bioreactors, this adenovirus propagation process was successfully scaled up to 250 L in a 300-L bioreactor under the worst-case sparging conditions projected for 10,000-L scale.     

Conformational propagation with prion-like characteristics in a simple model of protein folding

Protein refolding/misfolding to an alternative form plays an aetiologic role in many diseases in humans, including Alzheimer's disease, the systemic amyloidoses, and the prion diseases. Here we have discovered that such refolding can occur readily for a simple lattice model of proteins in a propagatable manner without designing for any particular alternative native state. The model uses a simple contact energy function for interactions between residues and does not consider the peculiarities of polypeptide geometry. In this model, under conditions where the normal (N) native state is marginally stable or unstable, two chains refold from the N native state to an alternative multimeric energetic minimum comprising a single refolded conformation that can then propagate itself to other protein chains. The only requirement for efficient propagation is that a two-faced mode of packing must be in the ground state as a dimer (a higher-energy state for this packing leads to less efficient propagation). For random sequences, these ground-state dimeric configurations tend to have more beta-sheet-like extended structure than almost any other sort of dimeric ground-state assembly. This implies that propagating states (such as for prions) are beta-sheet rich because the only likely propagating forms are beta-sheet rich. We examine the details of our simulations to see to what extent the observed properties of prion propagation can be predicted by a simple protein folding model. The formation of the alternative state in the present model shows several distinct features of amyloidogenesis and of prion propagation. For example, an analog of the phenomenon of conformationally distinct strains in prions is observed. We find a parallel between 'glassy' behavior in liquids and the formation of a propagatable state in proteins. This is the first report of simulation of conformational propagation using any heteropolymer model. The results imply that some (but not most) small protein sequences must maintain a sequence signal that resists refolding to propagatable alternative native states and that the ability to form such states is not limited to polypeptides (or reliant on regular hydrogen bonding per se) but can occur for other protein-like heteropolymers.     

A comparison of methods for predicting vegetation type

Predictive modeling of vegetation patterns has wide application in vegetation science. In this paper I discuss three methods of predictive modeling using data from the alpine treeline ecotone as a case study. The study area is a portion of Glacier National Park, Montana. Parametric general linear models (GLM), artificial neural networks (ANN) and classification tree (CT) methods of predicting vegetation type are compared to determine the relative strength of each predictive approach and how they may be used in concert to increase understanding of important vegetation – environment relations. For each predictive method, vegetation type within the alpine treeline ecotone is predicted using a suite of environmental indicator variables including elevation, moisture potential, solar radiation potential, snow potential index, and disturbance history. Results from each of the predictive methods are compared against the real vegetation types to determine the relative accuracy of the methods.When the entire data field is examined (i.e., not evaluated by smaller spatial aggregates of data) the ANN procedure produces the most accurate predictions (=0.571); the CT predictions are the least accurate (=0.351). The predicted patterns of vegetation on the landscape are considerably different using the three methods. The GLM and CT methods produce large contiguous swaths of vegetation types throughout the study area, whereas the ANN method produces patterns with much more heterogeneity and smaller patches.When predictions are compared to reality at catchment scale, it becomes evident that the accuracy of each method varies depending upon the specific situation. The ANN procedure remains the most accurate method in the majority of the catchments, but both the GLM and PCT produce the most accurate classifications in at least one basin each.The variability in predictive ability of the three methods tested here indicates that there may not be a single best predictive method. Rather it may be important to use a suite of predictive models to help understand the environment – vegetation relationships. The ability to use multiple predictive methods to determine which spatial subunits of a landscape are outliers is important when identifying locations useful for climate change monitoring studies.     

Automated identification of Fos expression

The concentration of Fos, a protein encoded by the immediate-early gene c-fos, provides a measure of synaptic activity that may not parallel the electrical activity of neurons. Such a measure is important for the difficult problem of identifying dynamic properties of neuronal circuitries activated by a variety of stimuli and behaviours. We employ two-stage statistical pattern recognition to identify cellular nuclei that express Fos in two-dimensional sections of rat forebrain after administration of antipsychotic drugs. In stage one, we distinguish dark-stained candidate nuclei from image background by a thresholding algorithm and record size and shape measurements of these objects. In stage two, we compare performance of linear and quadratic discriminants, nearest-neighbour and artificial neural network classifiers that employ functions of these measurements to label candidate objects as either Fos nuclei, two touching Fos nuclei or irrelevant background material. New images of neighbouring brain tissue serve as test sets to assess generalizability of the best derived classification rule, as determined by lowest cross-validation misclassification rate. Three experts, two internal and one external, compare manual and automated results for accuracy assessment. Analyses of a subset of images on two separate occasions provide quantitative measures of inter- and intra-expert consistency. We conclude that our automated procedure yields results that compare favourably with those of the experts and thus has potential to remove much of the tedium, subjectivity and irreproducibility of current Fos identification methods in digital microscopy.     

Viability and acrosome integrity of rabbit spermatozoa processed in a gelatin-supplemented extender

The effect of gelatin addition to the semen extender on the viability and acrosome integrity of rabbit spermatozoa was studied. Pooled semen samples were processed in a boar semen extender with or without gelatin addition. Semen samples were stored at 5 °C for 72 h. Viability and acrosome integrity was evaluated by light microscope. Results showed that gelatin addition had a significant positive effect on the quality of the stored semen.