Isolation of Synaptic Complexes in a CsCl Gradient: Conditions for Maximal Resolution in the Zonal Rotor B-Xiv and Circular Dichroism Patterns

Synaptic complexes were isolated from different brain regions and developmental stages in a CsCl density gradient using a Ti-14 zonal rotor. The buoyant density of the synaptic complexes from all these tissues was 1.178–1.190. The conditions for maximal resolution were rapid displacement of the density gradient from the rotor (40 ml/min); continuous centrifugation of the particles in the gradient for 66 hours, sample loads not exceeding 200 mg membrane protein. The banding densities of the membranes in the CsCl gradient were shown to be a linear inverse function of their lipid content. The circular dichroism patterns of synaptic complexes and other neural membranes in suspension or SDS solutions were similar to those of membranes from other mammalian cells or from bacteria although the ellipticities of the neural membranes were lower. These studies indicate that the proteins in a variety of membranes are in an α-helical conformation.     

IMMOBILIZATION OF BOVINE CATALASE ONTO MAGNETIC NANOPARTICLES

The scope of this study is to achieve carrier-bound immobilization of catalase onto magnetic particles (Fe₃O₄ and Fe₂O₃NiO₂ · H₂O) to specify the optimum conditions of immobilization. Removal of H₂O₂ and the properties of immobilized sets were also investigated. To that end, adsorption and then cross-linking methods onto magnetic particles were performed. The optimum immobilization conditions were found for catalase: immobilization time (15 min for Fe₃O₄; 10 min for Fe₂O₃NiO₂ · H₂O), the initial enzyme concentration (1 mg/mL), amount of magnetic particles (25 mg), and glutaraldehyde concentration (3%). The activity reaction conditions (optimum temperature, optimum pH, pH stability, thermal stability, operational stability, and reusability) were characterized. Also kinetic parameters were calculated by Lineweaver–Burk plots. The optimum pH values were found to be 7.0, 7.0, and 8.0 for free enzyme, Fe₃O₄-immobilized catalases, and Fe₂O₃NiO₂ · H₂O-immobilized catalases, respectively. All immobilized catalase systems displayed the optimum temperature between 25 and 35°C. Reusability studies showed that Fe₃O₄-immobilized catalase can be used 11 times with 50% loss in original activity, while Fe₂O₃NiO₂ · H₂O-immobilized catalase lost 67% of activity after the same number of uses. Furthermore, immobilized catalase systems exhibited improved thermal and pH stability. The results transparently indicate that it is possible to have binding between enzyme and magnetic nanoparticles.     

A new affinity gel for the purification of α-carbonic anhdrases

Abstract

The new affinity gel reported in this study was prepared using EUPERGIT C250L as a chromatographic bed material, to which etylenediamine spacer arms were attached to prevent steric hindrance between the matrix and ligand, and to facilitate effective binding of the CA-specific ligand, of the aromatic sulfonamide type for the purification of α-carbonic anhydrases (Cas; EC 4.2.1.1). Indeed, the aminoethyl moieties of the affinity gel were derivatized by reaction with 4-isothiocyanatobenzenesulfonamide, with the formation of a thiourea-based gel, having inhibitory effects against CAs. Both bovine erythrocyte carbonic anhydrase BCA and human (h) erythrocyte CA isoforms I, II (hCA I and II) have been purified from hemolysates, by using this affinity gel. The greatest purification fold and column yields for BCA and for cytosolic (hCA I?+?II) enzymes were of 181-fold (21.07%) and 184-fold (9.49%), respectively. Maximum binding was achieved at 15?°C and I?=?0.3 ionic strength for α-carbonic anhydrases.     

CARAGANA FABR. PROMOTES REVEGETATION AND SOIL REHABILITATION IN SALINE-ALKALI WASTELAND

To determine how plantations of Caragana microphylla shrubs affect saline-alkali soil amelioration and revegetation, we investigated the vegetation and sampled soils from saline-alkali wasteland (SAW), perennial Caragana forestland (PCF), Caragana forest after fire disturbance (CFF). Results showed that with the development of Caragana Fabr., highly dominant species of Poaceae family, including Elymus dahuricus, Thermopsis lanceolata, Stipa tianschanica, died out in PCF. Moreover, Papilionaceae family, including Lespedeza indica, Oxytropis psammocharis, and Astragalus scaberrimus, was established both in PCF and CFF. Phytoremediation of saline-alkali wasteland (SAW) was achieved by plantation, resulting in the reduced soil pH, sodium adsorption ratio, exchangeable sodium percentage, salinity, and Na⁺ concentration around Caragana shrubs. Greater amounts of soil organic, total nitrogen, ammonium nitrogen, available phosphorus, and available potassium were observed in PCF topsoil than in SAW topsoil. The concentration of mineralized N in PCF soil was significantly lower than that in SAW soil at all sampled depths, indicating that Caragana shrubs were just using N and therefore less measured in soils. Fire disturbance resulted in decreased soil pH and salinity, but increased organic content, total nitrogen, and ammonium nitrogen. The improved soil parameters and self-recovery of shrubs indicated that Caragana shrubs were well established after burning event.     

Complex Interaction and Adsorption of Glyphosate and Lead in Soil

Glyphosate [N-(phosphonomethyl)-glycine] is a herbicide widely used in large quantities in agricultural applications. It is also known to form complexes with metal ions, although its influence on metal behavior, such as lead (Pb) in soil, is not well understood. In this study, the adsorption and co-adsorption of Pb and glyphosate were determined on two soils [a red (RS) soil, Udic Ferrisol, and a yellow-brown (YB) soil, Udic Luvisol] of distinctly different chemical characteristics at varying pH conditions. Results indicate that the adsorption of lead and glyphosate strongly depends on soil types: the RS soil, characterized by a relatively high iron/aluminum content but a low pH and organic matter content, shows a much lower adsorption capacity for Pb but a higher sorption for glyphosate than the YB soil. The co-existence of Pb and glyphosate in soils resulted in complex interactions among Pb, glyphosate, Pb-glyphosate complexes, and soil minerals. The presence of glyphosate decreased Pb adsorption on the two soils, which was attributed primarily to the formation of soluble Pb-glyphosate complexes having relatively low affinities to soil surfaces. On the other hand, addition of Pb increased the adsorption of glyphosate on both soils, which was attributed to: (1) a decreased solution pH due to the ion exchange between Pb²⁺ and H⁺ on soil surfaces; and (2) increased sorption sites where Pb was adsorbed and acted as a bridge between glyphosate and the soil. The present study illustrates that the complex interactions among glyphosate, Pb, and soil may have important implications for the mobility and bioavailability of Pb in soil and should thus be considered in future environmental risk assessments.     

Improvement of bilirubin adsorption capacity of cellulose acetate/polyethyleneimine membrane using sodium deoxycholate

Bilirubin (BR) adsorbents have low removal efficiency because of the tight binding of BR with human albumin (HA) in a complicated blood system. Sodium deoxycholate (SDC) was selected as an adsorption promoter to improve the BR adsorption capacity of a cellulose acetate (CA)/polyethyleneimine (PEI) membrane. Static adsorption experiments show that the maximum BR adsorption capacity of the membrane with SDC in BR–HA mock solution is 100–200% at the molar ratio of SDC to HA ranging from 8 to 12, higher than that without SDC. It is also found that SDC is more efficiently adsorbed by the membrane than BR and HA. Absorption, circular dichroism, and zeta potential studies demonstrate that SDC can be bound with the BR–HA complex to form a ternary BR–HA-SDC_m complex. On the basis, the facilitated adsorption mechanism of BR with SDC was proposed that SDC aggregates or micelles form a quasi-multilayer adsorption on the membrane, increase approachable binding sites, and prolong the distance between the BR–HA complex and the membrane. Thus, SDC as a spacer reduces the influence of the steric hindrance of HA, resulting in an enhanced BR adsorption capacity. Dynamic adsorption results further evidence the facilitated adsorption mechanism.     

Mechanistic insights into RNase L through use of an MDMX-derived multi-functional protein domain

RNase L is part of the innate immune response to viral infection. It is activated by a small oligonucleotide (2–5A) whose synthesis is initiated as part of the interferon response. Binding of 2–5A to the N-terminal regulatory region, the ANK domain, of RNase L activates its ribonuclease activity and results in cleavage of RNA in the cell, which ultimately leads to apoptosis of the infected cell. The mechanism by which 2–5A activates the ribonuclease activity of RNase L is currently unclear but 2–5A has been shown to induce dimerization of RNase L. To investigate the importance of dimerization of RNase L, we developed a 15 kDa dimerization-inducing protein domain that was fused to the N-terminus of RNase L. From these studies we provide direct evidence that dimerization of RNase L occurs at physiologically relevant protein concentrations and correlates with activation of ribonuclease activity. We also show that the binding of 2–5A to RNase L promotes dimerization of the ANK domain and suggest how this could transmit a signal to the rest of the protein to activate ribonuclease activity. Finally, we show that the dimerization-inducing domain can be used as a general fusion partner to aid in protein expression and purification.     

Competitive protein adsorption on polysaccharide and hyaluronate modified surfaces

Adsorption of bovine serum albumin (BSA) and fibrinogen (Fg) was measured on six distinct bare and dextran- and hyaluronate-modified silicon surfaces created using two dextran grafting densities and three hyaluronic acid (HA) sodium salts derived from human umbilical cord, rooster comb and Streptococcus zooepidemicus. Film thickness and surface morphology depended on the HA molecular weight and concentration. BSA coverage was enhanced on surfaces in competitive adsorption of BSA:Fg mixtures. Dextranization differentially reduced protein adsorption onto surfaces based on oxidation state. Hyaluronization was demonstrated to provide the greatest resistance to protein coverage, equivalent to that of the most resistant dextranized surface. Resistance to protein adsorption was independent of the type of HA utilized. With changing bulk protein concentration from 20 to 40 μg ml^?1 for each species, Fg coverage on silicon increased by 4x, whereas both BSA and Fg adsorption on dextran and HA were far less dependent on protein bulk concentration.     

Human palatal saliva: Adsorption behaviour and the role of low-molecular weight proteins

In situ ellipsometry was employed to study adsorption from human palatal saliva (HPalS) in terms of dependence on surface wettability and saliva concentration ( ? 1%). Adsorbed amounts, kinetics, and elutability with buffer and sodium dodecyl sulphate (SDS) were determined. The low-molecular weight protein content of bulk HPalS was also investigated using two-dimensional gel electrophoresis, and this revealed the presence of a large group of proteins < 100 kDa in size. Adsorption to pure (hydrophilic) and methylated (hydrophobized) silica surfaces revealed that the total adsorbed amounts were greater on hydrophobized silica. Below concentrations of 0.5 and 0.25% saliva, adsorption was concentration dependent on hydrophobized and hydrophilic surfaces, respectively. The initial adsorption ( ? 30 min) was faster on hydrophobized surfaces. Addition of SDS removed more material than buffer rinsing on both surfaces. Analysis of the adsorption kinetics indicated that the presence of low-molecular weight proteins plays a role in adsorption from HPalS.     

Adsorption of flavobacterium breve and pseudomonas fluorescens p17 on different metals: Electrochemical polarization effect

The electrochemical polarization effect on early adsorption of Flavobacterium breve and Pseudomonas fluorescens P17 to platinum, titanium, stainless steel, copper, aluminum alloy and mild steel was studied. A well‐defined peak characterized the bacterial adsorption dependence on externally applied potential. Maximal adsorption occurred in the potential range of ‐0.5 to 0.5 V (SCE) for all tested metals. A shift of applied potential towards both a positive and a negative direction from the maximal adsorption potential (Emax,ad) was accompanied by a gradual decrease in bacterial adsorption. The extent of bacterial adsorption strongly depended on the nature of the metallic substratum and decreased accordingly as follows: platinum > titanium > stainless steel > aluminum alloy > carbon steel > copper. Adsorption on all tested metals was approximately two orders of magnitude higher with the relatively more hydrophobic F. breve compared to the less hydrophobic P. fluorescens P17. The effect of electrochemical polarization on the initial stages of bacterial adsorption onto metallic substrata is further discussed.