Impact of pH and butyric acid on butanol production during batch fermentation using a new local isolate of Clostridium acetobutylicum YM1

The effect of pH and butyric acid supplementation on the production of butanol by a new local isolate of Clostridium acetobutylicum YM1 during batch culture fermentation was investigated. The results showed that pH had a significant effect on bacterial growth and butanol yield and productivity. The optimal initial pH that maximized butanol production was pH 6.0 ± 0.2. Controlled pH was found to be unsuitable for butanol production in strain YM1, while the uncontrolled pH condition with an initial pH of 6.0 ± 0.2 was suitable for bacterial growth, butanol yield and productivity. The maximum butanol concentration of 13.5 ± 1.42 g/L was obtained from cultures grown under the uncontrolled pH condition, resulting in a butanol yield (Y_P/S) and productivity of 0.27 g/g and 0.188 g/L h, respectively. Supplementation of the pH-controlled cultures with 4.0 g/L butyric acid did not improve butanol production; however, supplementation of the uncontrolled pH cultures resulted in high butanol concentrations, yield and productivity (16.50 ± 0.8 g/L, 0.345 g/g and 0.163 g/L h, respectively). pH influenced the activity of NADH-dependent butanol dehydrogenase, with the highest activity obtained under the uncontrolled pH condition. This study revealed that pH is a very important factor in butanol fermentation by C. acetobutylicum YM1.     

Enhanced butanol production by optimization of medium parameters using Clostridium acetobutylicum YM1

A new isolate of the solvent-producing Clostridium acetobutylicum YM1 was used to produce butanol in batch culture fermentation. The effects of glucose concentration, butyric acid addition and C/N ratio were studied conventionally (one-factor-at-a-time). Moreover, the interactions between glucose concentration, butyric acid addition and C/N ratio were further investigated to optimize butanol production using response surface methodology (RSM). A central composite design was applied, and a polynomial regression model with a quadratic term was used to analyze the experimental data using analysis of variance (ANOVA). ANOVA revealed that the model was highly significant (p < 0.0001) and the effects of the glucose and butyric acid concentrations on butanol production were significant. The model validation experiment showed 13.82 g/L butanol was produced under optimum conditions. Scale up fermentation in optimized medium resulted in 17 g/L of butanol and 21.71 g/L of ABE. The experimental data of scale up in 5 L bioreactor and flask scale were fitted to kinetic mathematical models published in the literature to estimate the kinetic parameters of the fermentation. The models used gave the best fit for butanol production, biomass and glucose consumption for both flask scale and bioreactor scale up.     

Proof of concept in utilizing <Emphasis Type="Italic">in-trans</Emphasis> surface display system of <Emphasis Type="Italic">Lactobacillus plantarum</Emphasis> as mucosal tuberculosis vaccine via oral administration in mice

Background

Tuberculosis is one of the most common and deadliest infectious diseases worldwide affecting almost a third of the world’s population. Although this disease is being prevented and controlled by the Bacille Calmette Guérin (BCG) vaccine, the protective efficacy is highly variable and substandard (0–80%) in adults. Therefore, novel and effective tuberculosis vaccine that can overcome the limitations from BCG vaccine need to be developed.

Results

A novel approach of utilizing an in-trans protein surface display system of Lactobacillus plantarum carrying and displaying combination of Mycobacterium tuberculosis subunit epitope antigens (Ag85B, CFP-10, ESAT-6, Rv0475 and Rv2031c) fused with LysM anchor motif designated as ACERL was constructed, cloned and expressed in Esherichia coli Rossetta expression host. Subsequently the binding capability of ACERL to the cell wall of L. plantarum was examined via the immunofluorescence microscopy and whole cell ELISA where successful attachment and consistent stability of cell wall binding up to 4 days was determined. The immunization of the developed vaccine of L. plantarum surface displaying ACERL (Lp ACERL) via the oral route was studied in mice for its immunogenicity effects. Lp ACERL immunization was able to invoke significant immune responses that favor the Th1 type cytokine response of IFN-γ, IL-12 and IL-2 as indicated by the outcome from the cytokine profiling of spleen, lung, gastrointestinal tract (GIT), and the re-stimulation of the splenocytes from the immunized mice. Co-administration of an adjuvant consisting of Lactococcus lactis secreting mouse IL-12 (LcIL-12) with Lp ACERL was also investigated. It was shown that the addition of LcIL-12 was able to further generate significant Th1 type cytokines immune responses, similar or better than that of Lp ACERL alone which can be observed from the cytokine profiling of the immunized mice’s spleen, lung and GIT.

Conclusions

This study represents a proof of concept in the development of L. plantarum as a carrier for a non-genetically modified organism (GMO) tuberculosis vaccine, which may be the strategy in the future for tuberculosis vaccine development.

     

Evaluation of sticky traps for adult Aedes mosquitoes in Malaysia: a potential monitoring and surveillance tool for the efficacy of control strategies

The present study compared the performance of sticky traps in order to identify the most effective and practical trap for capturing Aedes aegypti and Aedes albopictus mosquitoes. Three phases were conducted in the study, with Phase 1 evaluating the five prototypes (Models A, B, C, D, and E) of sticky trap release‐and‐recapture using two groups of mosquito release numbers (five and 50) that were released in each replicate. Similarly, Phase 2 compared the performance between Model E and the classical ovitrap that had been modified (sticky ovitrap), using five and 50 mosquito release numbers. Further assessment of both traps was carried out in Phase 3, in which both traps were installed in nine sampling grids. Results from Phase 1 showed that Model E was the trap that recaptured higher numbers of mosquitoes when compared to Models A, B, C, and D. Further assessment between Model E and the modified sticky ovitrap (known as Model F) found that Model F outperformed Model E in both Phases 2 and 3. Thus, Model F was selected as the most effective and practical sticky trap, which could serve as an alternative tool for monitoring and controlling dengue vectors in Malaysia.     

Floral and pollinator behaviour of flexistylous Bornean ginger, Alpinia nieuwenhuizii (Zingiberaceae)

Flexistyly is a unique floral mechanism involving extreme curving of the style. It was first described in Chinese ginger (Amomum, Zingiberaceae). This is a pioneer report on flexistylous gingers of Malesia, where most species of this family grow. We observed the floral behaviour and flower visitors in Alpinia nieuwenhuizii Val., a Bornean endemic. Although the floral behaviour and effective pollinators (carpenter bees, Xylocopa) were similar between the Bornean species and the previously reported flexistylous Alpinia, the pollinator behaviour between them strikingly differed with regard to the visit frequency of the pollinators showing a bimodal pattern during the day. This was a better match for the floral behaviour of the flexistylous Alpinia. Some gender differentiation observed between the two types of morphs is also discussed in the present study.     

Biochemical fractionation and characterization of proteins from Golgi-enriched membranes.

Fractions enriched in Golgi membranes were prepared from rat liver by sucrose gradient ultracentrifugation. These enriched membranes were further subfractionated on the basis of their solubilities in EGTA, 150 mM sodium carbonate, pH 11.5, sodium deoxycholate, Triton X-100, or sodium dodecyl sulfate. This led to isolation of peripheral, luminal, and integral membrane proteins of the Golgi-enriched membranes. Luminal and membrane proteins were further purified by wheat germ agglutinin and concanavalin A lectin affinity chromatographies. Some proteins from these lectin columns were resolved by preparative gel electrophoresis and microsequenced. Subsequently, antibodies were produced for two proteins by immunization of either mice or rabbits. Immunofluorescence microscopy suggests that these proteins are confined to Golgi apparatus-like structures. The protocol described is well suited for the study of organelle structure and function.     

Electronic Characterization of Au/DNA/ITO Metal-Semiconductor-Metal Diode and Its Application as a Radiation Sensor

Deoxyribonucleic acid or DNA molecules expressed as double-stranded (DSS) negatively charged polymer plays a significant role in electronic states of metal/silicon semiconductor structures. Electrical parameters of an Au/DNA/ITO device prepared using self-assembly method was studied by using current–voltage (I-V) characteristic measurements under alpha bombardment at room temperature. The results were analyzed using conventional thermionic emission model, Cheung and Cheung’s method and Norde’s technique to estimate the barrier height, ideality factor, series resistance and Richardson constant of the Au/DNA/ITO structure. Besides demonstrating a strongly rectifying (diode) characteristic, it was also observed that orderly fluctuations occur in various electrical parameters of the Schottky structure. Increasing alpha radiation effectively influences the series resistance, while the barrier height, ideality factor and interface state density parameters respond linearly. Barrier height determined from I–V measurements were calculated at 0.7284 eV for non-radiated, increasing to about 0.7883 eV in 0.036 Gy showing an increase for all doses. We also demonstrate the hypersensitivity phenomena effect by studying the relationship between the series resistance for the three methods, the ideality factor and low-dose radiation. Based on the results, sensitive alpha particle detectors can be realized using Au/DNA/ITO Schottky junction sensor.     

Consistency in boldness expression varies with ecological context in a jumping spider

Animals can adjust their behaviours depending on ecological context (i.e., behavioural plasticity), and an individual's response to a given context may also vary from occasion to occasion (intra‐individual variability). Recognizing the roles of both behavioural plasticity and intra‐individual variability is important in understanding how behavioural diversity is maintained within populations. However, how the ecological context itself influences the individual behavioural response and intra‐individual variability (e.g., how variable an individual is in their behavioural expression) remains largely unexplored. Here, we examine boldness expression (the duration of startle response) in a specialised spider‐eating jumping spider, Portia labiata, across three contexts following a mild disturbance: presence of a conspecific intruder (most dangerous), environmental change but no conspecific intruder, and no conspecific intruder or environmental change (safest). We found that context does not significantly influence the average boldness expression at the population level. However, each individual responded to each context differently, and the repeatability of boldness expression—the proportion of behavioural variation attributable to the between ‐individual level—is context‐dependent. We also found that in the presence of a conspecific intruder, spiders behave less predictably than in the environmental change context, but not differently from the safest context. These findings may suggest that the presence of conspecifics influences behavioural consistency in individuals, but that this may occur without influencing the population average behaviour.     

Evaluation of in-vitro antioxidant and antibacterial properties of Commelina nudiflora L. extracts prepared by different polar solvents

The study explored on the commonly available weed plant Commelina nudiflora which has potential in-vitro antioxidant and antimicrobial activity. The different polar solvents such as ethanol, chloroform, dichloromethane, hexane and aqueous were used for the soxhlet extraction. The extracts were identified pharmacologically as important bioactive compounds and their potential free radical scavenging activities, and antimicrobial properties were studied. C. nudiflora extracts were monitored on their in-vitro antioxidant ability by DPPH and ABTS radical scavenging assay. Aqueous extract shows significant free radical scavenging activity of 63.4 mg/GAE and 49.10 mg/g in DPPH and ABTS respectively. Furthermore, the aqueous crude extract was used in antibacterial studies, which shows the highest inhibitory activity against Pseudomonas aeruginosa, Escherichia coli and Salmonella typhi. Among all the extracts, aqueous extract of C. nudiflora has significant control over free radical scavenging activity and inhibition of the growth of food pathogenic bacteria. Also, the aqueous extract contains abundance of phenolics and flavonoids higher than other extracts. This study explored weed plant C. nudiflora as a potential source of antioxidant and antibacterial efficacy and identified various therapeutic value bioactive compounds from GC–MS analysis.Abbreviations: ABTS, 2,2′-azinobis-(3-ethylbenzothiazoline-6-sulphonic acid), DPPH, 2,2-diphenyl-1-picrylhydrazyl, GAE, gallic acid equivalent, GC–MS, gas chromatography and mass spectrometry