Human Health Risk Assessment of Soils Contaminated with Metal(loid)s by Using DGT Uptake: A Case Study of a Former Korean Metal Refinery Site

The human health risk of soils contaminated with As, Pb, Cu, and Zn was evaluated based on pseudo-total concentrations of metal(loid)s, the physiologically based extraction test (PBET), and diffusive gradients in thin films (DGT). Non-carcinogenic (NCR) and carcinogenic (CR) risks exceeded the U.S. Environmental Protection Agency criteria under both the residential and non-residential scenarios. Human bioavailable concentrations (PBET) were much lower than pseudo-total concentrations. The Hazardous Index of NCR (HI (NCR)) for the PBET in the studied soils was 67% and 94% less than that for pseudo-total concentration, respectively, under the non-residential and residential scenarios. Similarly, CR for the PBET was also 65% and 93% less for the two soils. The concentration of metal(loid)s accumulated in the DGT resin was highly correlated with the PBET-extractable concentration (R² > 0.649). Therefore, for both the CR and HI (NCR), the DGT-calculated risk was linearly related to the PBET-calculated risk for the studied soils under both scenarios. The results suggest that DGT uptake and PBET-extracted concentrations are good surrogates for risk estimation and that both J1 and J2 soils require remediation before their use for residential or non-residential purposes.     

Effects of Disinfectants on Larval Development of Ascaris suum Eggs

The objective of this study was to evaluate the effects of several different commercial disinfectants on the embryogenic development of Ascaris suum eggs. A 1-ml aliquot of each disinfectant was mixed with approximately 40,000 decorticated or intact A. suum eggs in sterile tubes. After each treatment time (at 0.5, 1, 5, 10, 30, and 60 min), disinfectants were washed away, and egg suspensions were incubated at 25˚C in distilled water for development of larvae inside. At 3 weeks of incubation after exposure, ethanol, methanol, and chlorohexidin treatments did not affect the larval development of A. suum eggs, regardless of their concentration and treatment time. Among disinfectants tested in this study, 3% cresol, 0.2% sodium hypochlorite and 0.02% sodium hypochlorite delayed but not inactivated the embryonation of decorticated eggs at 3 weeks of incubation, because at 6 weeks of incubation, undeveloped eggs completed embryonation regardless of exposure time, except for 10% povidone iodine. When the albumin layer of A. suum eggs remained intact, however, even the 10% povidone iodine solution took at least 5 min to reasonably inactivate most eggs, but never completely kill them with even 60 min of exposure. This study demonstrated that the treatment of A. suum eggs with many commercially available disinfectants does not affect the embryonation. Although some disinfectants may delay or stop the embryonation of A. suum eggs, they can hardly kill them completely.     

Development of a high-throughput screening assay for cytoprotective agents in rotenone-induced cell death

Parkinson’s disease (PD) is a neurodegenerative disease featured by selective loss of substantia nigra neurons. Rotenone administration in animals induces neurodegeneration accompanied by α-synuclein-positive Lewy body-like inclusions, recapturing typical histopathological features of PD. In an effort to screen for small-molecule agents to reverse rotenone-induced cytotoxicity, we developed and validated a sensitive and robust assay with neuroblastoma SK-N-SH cells. This assay was amenable to a high-throughput screening format with Z′ factor of 0.56. Robotic screening of a bioactive compound library led to the identification of carnosic acid that can effectively protect cells from rotenone treatment. Using a high-content image-based assay and Western blot analysis, we demonstrated that carnosic acid protects cells from rotenone stress by significant induction of HSP70 expression. Therefore, the assay reported here can be used to identify novel cytoprotective agents for clinical therapeutics of PD.     

The effect of resistant starch (RS) on the bovine rumen microflora and isolation of RS-degrading bacteria

Applied Microbiology and Biotechnology - Resistant starch (RS) in the diet reaches the large intestine without degradation, where it is decomposed by the commensal microbiota. The fermentation of...     

Development and Use of Field Application Vectors To Express Nonadaptive Foreign Genes in Competitive Environments

Many potential applications of genetically engineered microorganisms in environmental and agricultural biotechnology involve introducing genetic capabilities into nonsterile competitive environments in which they provide no advantage to the host. Field application vectors have been designed for the purpose of creating a temporary niche for the host in such environments. This technique involves the addition to the target environment of a selective substrate readily utilizable by the host microorganism but unavailable to most indigenous species. Thirteen nonionic and anionic detergents, representing a wide range of structural complexities and molecular weights, were screened as potential selective substrates. Competition experiments in soil, using Warburg respirometry, indicated that isolates from six different detergent enrichment cultures were more active on their corresponding detergents than the indigenous microorganisms. Detergents of intermediate structural complexities and molecular weights were most effective for use as selective substrates. A field application vector that utilizes 1.0% Igepal CO-720 (detergent) as the selective substrate and Pseudomonas paucimobilis 1IGP4 as the host was tested for its ability to increase the presence of nonadaptive tetracycline resistance marker genes in soil. In soil amended with the selective substrate, strain 1IGP4 plate counts increased by three orders of magnitude and tetracycline-resistant transformant (pRK293) counts increased from 1.8 × 10⁶/g of soil to 4.3 × 10⁸/g in 2 days. Inoculation in the absence of substrate amendment or amendment with a nonselective substrate did not result in growth of strain 1IGP4. These results demonstrate the effectiveness of field application vectors for increasing the concentration of nonadaptive genes in competitive environments.     

Retarded Charge–Carrier Recombination in Photoelectrochemical Cells from Plasmon‐Induced Resonance Energy Transfer

N‐type metal oxides such as hematite (α‐Fe₂O₃) and bismuth vanadate (BiVO₄) are promising candidate materials for efficient photoelectrochemical water splitting; however, their short minority carrier diffusion length and restricted carrier lifetime result in undesired rapid charge recombination. Herein, a 2D arranged globular Au nanosphere (NS) monolayer array with a highly ordered hexagonal hole pattern (hereafter, Au array) is introduced onto the surface of photoanodes comprised of metal oxide films via a facile drying and transfer‐printing process. Through plasmon‐induced resonance energy transfer, the Au array provides a strong electromagnetic field in the near‐surface area of the metal oxide film. The near‐field coupling interaction and amplification of the electromagnetic field suppress the charge recombination with long‐lived photogenerated holes and simultaneously enhance the light harvesting and charge transfer efficiencies. Consequently, an over 3.3‐fold higher photocurrent density at 1.23 V versus reversible hydrogen electrode (RHE) is achieved for the Au array/α‐Fe₂O₃. Furthermore, the high versatility of this transfer printing of Au arrays is demonstrated by introducing it on the molybdenum‐doped BiVO₄ film, resulting in 1.5‐fold higher photocurrent density at 1.23 V versus RHE. The tailored metal film design can provide a potential strategy for the versatile application in various light‐mediated energy conversion and optoelectronic devices.     

Microdischarge‐Based Direct Current Triboelectric Nanogenerator via Accumulation of Triboelectric Charge in Atmospheric Condition

Direct conversion of mechanical energy into direct current (DC) by triboelectric nanogenerators (TENGs) is one of the desired features in terms of energy conversion efficiency. Although promising applications have been reported using the triboelectric effect, effective DC generating TENGs must be developed for practical purposes. Here, it is reported that continuous DC generation within a TENG itself, without any circuitry, can be achieved by triggering air breakdown via triboelectrification. It is demonstrated that DC generation occurs in combination with i) charge accumulation to generate air breakdown, ii) incident discharge (microdischarge), and iii) conveyance of charges to make the device sustainable. 10.5 mA m^?2 of output current and 10.6 W m^?2 of output power at 33 MΩ load resistance are achieved. Compared to the best DC generating TENGs ever reported, the TENG in this present study generates about 20 times larger root‐mean square current density.     

Cobalt‐Free High‐Capacity Ni‐Rich Layered Li[Ni0.9Mn0.1]O2 Cathode

Li[Ni_0.9Co_0.1]O₂ (NC90), Li[Ni_0.9Co_0.05Mn_0.05]O₂ (NCM90), and Li[Ni_0.9Mn_0.1]O₂ (NM90) cathodes are synthesized for the development of a Co‐free high‐energy‐density cathode. NM90 maintains better cycling stability than the two Co‐containing cathodes, particularly under harsh cycling conditions (a discharge capacity of 236 mAh g^?1 with a capacity retention of 88% when cycled at 4.4 V under 30 °C and 93% retention when cycled at 4.3 V under 60 °C after 100 cycles). The reason for the enhanced stability is mainly the ability of NM90 to absorb the strain associated with the abrupt anisotropic lattice contraction/extraction and to suppress the formation of microcracks, in addition to enhanced chemical stability from the increased presence of stable Mn⁴⁺. Although the absence of Co deteriorates the rate capability, this can be overcome as the rate capability of the NM90 approaches that of the NCM90 when cycled at 60 °C. The long‐term cycling stability of NM90 is confirmed in a full cell, demonstrating that it is one of the most promising Co‐free cathodes for high‐energy‐density applications. This study not only provides insight into redefining the role of Mn in a Ni‐rich cathode, it also represents a clear breakthrough in achieving a commercially viable Co‐free Ni‐rich layered cathode.