Liquid chromatographic assay for common sunscreen agents: application to in vivo assessment of skin penetration and systemic absorption in human volunteers

The purpose of the present study was to develop a reverse-phase high-performance liquid chromatographic (HPLC) assay for quantifying four common sunscreen agents, namely 2-hydroxy-4-methoxybenzophenone, 2-ethylhexyl-p-methoxycinnamate, 2-ethylhexylsalicylate (octylsalicylate) and salicylic acid 3,3,5-trimethcyclohexyl ester (homosalate) in a range of biological matrices. This assay was further applied to study the skin penetration and systemic absorption of sunscreen filters after topical application to human volunteers. Separation was achieved utilizing a Symmetry C(18) column with methanol-water as the mobile phase. The assay permits analysis of the sunscreen agents in biological fluids, including bovine serum albumin (BSA) solution, plasma and urine, and in human epidermis. The assay was linear (r2 > 0.99) with minimum detectable limits of 0.8 ng for oxybenzone, 0.3 ng for octylmethoxycinnamate, and 2 ng for homosalate and octylsalicylate. The inter- and intra-day variation for the four sunscreens was less than 3% at the upper end of the linear range and less than 6% at the lower end. Recoveries of sunscreens from plasma, 4% (w/v) BSA solution and epidermal membranes were within the range of 91-104%. Recoveries from urine of the four sunscreens, and oxybenzone with its metabolites were more than 86%. Up to approximately 1% of the applied dose of oxybenzone and its metabolites was detected in the urine. Appreciable amounts were also detected in the stratum corneum through tape stripping. The HPLC assay and extraction procedures developed are sensitive, simple, rapid, accurate and reproducible. Results from the preliminary clinical study demonstrate significant penetration of all sunscreen agents into the skin, and oxybenzone and metabolites across the skin.     

Statistical media optimization and production of ITS alpha-amylase from Aspergillus oryzae in a bioreactor

The production of an intermediate temperature-stable (ITS) α-amylase from Aspergillus oryzae was studied by using a central composite design with three independent variables, viz., starch, yeast extract, and K₂HPO₄. The model equation provided a suitable model for the response surface for α-amylase production, and, from the optimal concentrations of the medium components, a model was predicted, which was then used for enzyme production in a 150-L bioreactor. In the bioreactor studies, the enzyme yields (161 U/ml) were similar to that of the shake flask (133 U/ml); however, the time required for maximum α-amylase production in the bioreactor was reduced to 48 h compared with 120 h in shake flask cultures. An increased level of phosphate in the medium and low inoculum size were necessary to control the excessive foaming in the bioreactor; however, control of the pO₂ level and agitation was not mandatory for enzyme production. The peak enzyme production coincided with the increase in pH of the fermentation broth and was maximal when the pH of the system was above 7.5. Thus, in the present study, pH acted as an indicator of the initiation or end of the enzyme synthesis or of the fermentation cycle. Received: 20 November 2001 / Accepted 31 December 2001     

Anterior repression of a Drosophila stripe enhancer requires three position-specific mechanisms

The striped expression pattern of the pair-rule gene even skipped (eve) is established by five stripe-specific enhancers, each of which responds in a unique way to gradients of positional information in the early Drosophila embryo. The enhancer for eve stripe 2 (eve 2) is directly activated by the morphogens Bicoid (Bcd) and Hunchback (Hb). As these proteins are distributed throughout the anterior half of the embryo, formation of a single stripe requires that enhancer activation is prevented in all nuclei anterior to the stripe 2 position. The gap gene giant (gt) is involved in a repression mechanism that sets the anterior stripe border, but genetic removal of gt (or deletion of Gt-binding sites) causes stripe expansion only in the anterior subregion that lies adjacent to the stripe border. We identify a well-conserved sequence repeat, (GTTT)(4), which is required for repression in a more anterior subregion. This site is bound specifically by Sloppy-paired 1 (Slp1), which is expressed in a gap gene-like anterior domain. Ectopic Slp1 activity is sufficient for repression of stripe 2 of the endogenous eve gene, but is not required, suggesting that it is redundant with other anterior factors. Further genetic analysis suggests that the (GTTT)(4)-mediated mechanism is independent of the Gt-mediated mechanism that sets the anterior stripe border, and suggests that a third mechanism, downregulation of Bcd activity by Torso, prevents activation near the anterior tip. Thus, three distinct mechanisms are required for anterior repression of a single eve enhancer, each in a specific position. Ectopic Slp1 also represses eve stripes 1 and 3 to varying degrees, and the eve 1 and eve 3+7 enhancers each contain GTTT repeats similar to the site in the eve 2 enhancer. These results suggest a common mechanism for preventing anterior activation of three different eve enhancers.     

Successful development of viable blastocysts from enhanced green fluorescent protein transgene-microinjected mouse embryos: comparison of culture media

To improve efficiency of transgenesis, we compared M16 and CZB embryo culture media, supporting development to blastocysts of FVB/N mouse pronuclear-eggs, microinjected with enhanced green fluorescent protein (EGFP) transgene. When EGFP-injected-eggs were cultured (120 hr), blastocyst development was significantly (P < 0.03) higher in M16 medium (72.5 +/- 2.4%) than that in CZB (13.2 +/- 4.3%) or CZBG (CZB with 5.6 mM glucose at 48 hr culture) (62.1 +/- 3.7%) media. Blastocyst development of noninjected embryos was higher in M16 (92.0 +/- 2.6%) and CZBG (83.9 +/- 3.9%) media than in CZB (31.9 +/- 2.8%) medium (P < 0.0001). However, percentages of morulae at 72 hr were comparable in all treatments. Developed blastocysts were better in M16 than in CZB or CZBG media. Consistent with this, mean cell number per blastocyst, developed from injected embryos, was significantly (P < 0.002) higher in M16 medium (79.6), than those in CZB (31.3) or CZBG media (60.7); similar with noninjected embryos. Cell allocation to trophectoderm (TE) and inner cell mass (ICM), i.e., TE:ICM ratio, for injected blastocysts in M16 (3.0) was less than (P < 0.05) those in CZB (4.2) and CZBG (4.4) media; similar with noninjected blastocysts. Moreover, blastocysts, developed in M16 and CZBG media, hatched, attached, and exhibited trophoblast outgrowth; 18% of them showed EGFP-expression. Importantly, blastocysts from M16 medium produced live transgenic "green" pups (11%) following embryo transfer. Taken together, our results indicate that supplementation of glucose, at 48 hr of culture (CZBG), is required for morula to blastocyst transition; M16 medium, containing glucose from the beginning of culture, is superior to CZB or CZBG for supporting development of biologically viable blastocysts from EGFP-transgene-injected mouse embryos.     

Finite Element Method (FEM) Modeling of Freeze-drying: Monitoring Pharmaceutical Product Robustness During Lyophilization

Lyophilization is an approach commonly undertaken to formulate drugs that are unstable to be commercialized as ready to use (RTU) solutions. One of the important aspects of commercializing a lyophilized product is to transfer the process parameters that are developed in lab scale lyophilizer to commercial scale without a loss in product quality. This process is often accomplished by costly engineering runs or through an iterative process at the commercial scale. Here, we are highlighting a combination of computational and experimental approach to predict commercial process parameters for the primary drying phase of lyophilization. Heat and mass transfer coefficients are determined experimentally either by manometric temperature measurement (MTM) or sublimation tests and used as inputs for the finite element model (FEM)-based software called PASSAGE, which computes various primary drying parameters such as primary drying time and product temperature. The heat and mass transfer coefficients will vary at different lyophilization scales; hence, we present an approach to use appropriate factors while scaling-up from lab scale to commercial scale. As a result, one can predict commercial scale primary drying time based on these parameters. Additionally, the model-based approach presented in this study provides a process to monitor pharmaceutical product robustness and accidental process deviations during Lyophilization to support commercial supply chain continuity. The approach presented here provides a robust lyophilization scale-up strategy; and because of the simple and minimalistic approach, it will also be less capital intensive path with minimal use of expensive drug substance/active material.     

Chronic Invasive Sinus Aspergillosis in Immunocompetent Hosts: A Geographic Comparison

Purpose  

To investigate potential differences in clinical presentation, histopathology, and outcomes of chronic invasive sinus aspergillosis (CISA) based on geographic region and species of Aspergillus isolated.     

Discovery of novel,orally available benzimidazoles as melanin concentrating hormone receptor 1 (MCHR1) antagonists

Melanin concentrating hormone (MCH) is an important mediator of energy homeostasis and plays role in several disorders such as obesity, stress, depression and anxiety. The synthesis and biological evaluation of novel benzimidazole derivatives as MCHR1 antagonists are described. The in vivo proof of principle for weight loss with a lead compound from this series is exemplified.     

An antibiotic,heavy metal resistant and halotolerant <Emphasis Type="Italic">Bacillus cereus</Emphasis> SIU1 and its thermoalkaline protease

Background  

Many workers have reported halotolerant bacteria from saline conditions capable of protease production. However, antibiotic resistance and heavy metal tolerance pattern of such organisms is not documented very well. Similarly, only a few researchers have reported the pattern of pH change of fermentation medium during the course of protease production. In this study, we have isolated a halotolerant Bacillus cereus SIU1 strain from a non-saline environment and studied its antibiotic and heavy metal resistance pattern. The isolate produces a thermoalkaline protease and changes the medium pH during the course of fermentation. Thermostability of protease was also studied for 30 min.