Bovine liver dihydropyrimidine amidohydrolase: pH dependencies of inactivation by chelators and steady-state kinetic properties

Dihydropyrimidine amidohydrolase (EC 3.5.2.2) catalyzes the reversible hydrolysis of 5,6-dihydropyrimidines to the corresponding beta-ureido acids. Previous work has shown that incubation of this Zn2+ metalloenzyme with 2,6-dipicolinic acid, 8-hydroxyquinoline-5-sulfonic acid, or o-phenanthroline results in inactivation by Zn2+ removal by a reaction pathway involving formation of a ternary enzyme-Zn2+-chelator complex which subsequently dissociates to yield apoenzyme and the Zn2+-chelate (K. P. Brooks, E. A. Jones, B. D. Kim, and E. G. Sander, (1983) Arch. Biochem. Biophys. 226, 469-483). In the present work, the pH dependence of chelator inactivation is studied. The equilibrium constant for formation of the ternary complex is strongly pH dependent and increases with decreasing pH for all three chelators. There is a positive correlation between the value of the equilibrium constant observed for each chelator and the value of its stability constant for formation of Zn2+-chelate. The affinity of the chelators for the enzyme increases in the order 8-hydroxyquinoline-5-sulfonic acid greater than o-phenanthroline greater than 2,6-dipicolinic acid. The first-order rate constant for breakdown of the ternary complex to yield apoenzyme and Zn2+-chelate is invariant with pH for a given chelator but is different for each chelator, increasing in the reverse order. The pH dependence of the inactivation shows that two ionizable groups on the enzyme are involved in the inactivation. On the other hand, the steady-state kinetic behavior of the enzyme is well-described by ionization of a single group with a pK of 6.0 in the free enzyme. The basic form of the group is required for catalysis; protonation of the group decreases both Vmax and the apparent affinity for substrate. Conversely, binding of substrate decreases the pK of this group to about 5. L-Dihydroorotic acid is shown to be a competitive inhibitor of dihydropyrimidine amidohydrolase. Binding of L-dihydroorotic acid increases the pK of the ionizable group to 6.5. The agreement between the pK in the enzyme-L-dihydroorotic acid complex and the higher pK observed in the pH dependence of inactivation by chelators suggests that the same group is involved in the binding of acid, and chelators. The different effects of substrate and L-dihydroorotic acid on the pK suggest that the binding modes of these two ligands may be different and suggest a structural basis for the mutally exclusive substrate specificities of dihydropyrimidine amidohydrolase and dihydroorotase.     

Reversible addition of bisulfite buffer to the cytidine ring system

The rate constants for the reversible addition of protons and sulfite to the 5,6 double bond of cytidine and 3-methylcytidine have been spectrophotometrically measured under conditions (25°C, μ = 1.0 ) where the deamination of 5,6-dihydrocytidine-6-sulfonate is minimal. Both the addition and the elimination of sulfite from the ring system are subject to general catalysis of proton transfer. For the reaction in either direction, plots of the pseudo-firstorder rate constants against increasing buffer concentration are biphasic and indicative of at least a two-step reaction pathway with both steps being subject to general acid-base catalysis. Kinetic hydrogen-deuterium isotope effects were measured for both buffer-catalyzed steps of sulfite elimination from 3-methyl-5,6-dihydrocytidine-6-sulfonate and sulfite addition to 3-methylcytidine. Both H₂O and D₂O were used as solvent. For both the addition and the elimination of SO₃²⁻ values of k₂^H/k₂^D were 6.3–7.1 and 2.3–2.6 at low and high imidazole buffer concentration, respectively. The large isotope effects values in the range of 6–7 can be attributed to rate-determining proton transfer to carbon-5 of the cytidine ring system. The smaller values are more likely caused by proton transfer to a electronegative atom such as the oxygen on carbon-2 of the cytidine ring. The equilibrium constants for bisulfite buffer addition to 3-methylcytidine and cytidine at 25°C, μ = 1.0 , pH 7.2, are 10.2 and 1.3 ⁻¹, respectively.     

The transient receptor potential protein (Trp), a putative store-operated Ca2+ channel essential for phosphoinositide-mediated photoreception, forms a signaling complex with NorpA, InaC and InaD.

The transient receptor potential protein (Trp) is a putative capacitative Ca2+ entry channel present in fly photoreceptors, which use the inositol 1,4,5-trisphosphate (InsP3) signaling pathway for phototransduction. By immunoprecipitation studies, we find that Trp is associated into a multiprotein complex with the norpA-encoded phospholipase C, an eye-specific protein kinase C (InaC) and with the InaD protein (InaD). InaD is a putative substrate of InaC and contains two PDZ repeats, putative protein-protein interaction domains. These proteins are present in the photoreceptor membrane at about equimolar ratios. The Trp homolog analyzed here is isolated together with NorpA, InaC and InaD from blowfly (Calliphora) photoreceptors. Compared to Drosophila Trp, the Calliphora Trp homolog displays 77% amino acid identity. The highest sequence conservation is found in the region that contains the putative transmembrane domains S1-S6 (91% amino acid identity). As investigated by immunogold labeling with specific antibodies directed against Trp and InaD, the Trp signaling complex is located in the microvillar membranes of the photoreceptor cells. The spatial distribution of the signaling complex argues against a direct conformational coupling of Trp to an InsP3 receptor supposed to be present in the membrane of internal photoreceptor Ca2+ stores. It is suggested that the organization of signal transducing proteins into a multiprotein complex provides the structural basis for an efficient and fast activation and regulation of Ca2+ entry through the Trp channel.     

A comparison of structural and dynamic properties of different simulation methods applied to SH3.

The dynamic and static properties of molecular dynamics simulations using various methods for treating solvent were compared. The SH3 protein domain was chosen as a test case because of its small size and high surface-to-volume ratio. The simulations were analyzed in structural terms by examining crystal packing, distribution of polar residues, and conservation of secondary structure. In addition, the "essential dynamics" method was applied to compare each of the molecular dynamics trajectories with a full solvent simulation. This method proved to be a powerful tool for the comparison of large concerted atomic motions in SH3. It identified methods of simulation that yielded significantly different dynamic properties compared to the full solvent simulation. Simulating SH3 using the stochastic dynamics algorithm with a vacuum (reduced charge) force field produced properties close to those of the full solvent simulation. The application of a recently described solvation term did not improve the dynamic properties. The large concerted atomic motions in the full solvent simulation as revealed by the essential dynamics method were analyzed for possible biological implications. Two loops, which have been shown to be involved in ligand binding, were seen to move in concert to open and close the ligand-binding site.     

Refinement of the Van der Woude Gene Location and Construction of a 3.5-Mb YAC Contig and STS Map Spanning the Critical Region in 1q32–q41

Van der Woude syndrome (VWS) is the most frequent form of syndromic clefting. Linkage analysis has localized the gene between D1S245 and D1S414, an interval of 4.1 cM with the following order of loci: centromere–D1S245/D1S471–D1S491–D1S205–D1S414–telomere. A microdeletion around D1S205 aided in narrowing the critical region to D1S491–D1S414 by heterozygosity testing. In this study, the location was refined by detection of a recombinant with D1S205 in a new family, indicating that VWS lies between D1S491 and D1S205, a 1.6-cM interval. A roughly 3.5-Mb YAC contig was built from D1S245 through D1S414, encompassing the interval D1S491–D1S205 in level 1 or level 2 paths. Clones were assembled by sequence tagged site (STS) content using the five polymorphic markers from above, four novel STSs identified from YAC ends, and a new STS derived from probe CRI-L461 (D1S70). D1S70 was assigned to the critical region. One single YAC, yCEPH785B2, contains both flanking STSs (D1S491, D1S205). STS content mapping suggests neither chimerism nor deletion of yCEPH785B2 but does suggest that the maximum size of the critical region is approximately 850 kb. All STSs were tested for their presence on a somatic cell hybrid containing the microdeleted chromosome 1 as the sole human chromosome 1 component. Both the proximal and distal ends of the microdeletion mapped to the 850-kb YAC, yCEPH785B2. Therefore, the microdeletion overlapped the critical region, confirming the genetic recombinant data.     

A new ATP-binding fold in actin, hexokinase and Hsc70

One of a cell biologist's favourite occupations is to discover the proteins that perform newly described functions in the cell. Very often lately, this has resulted in the identification of protein families whose related amino acid sequences reflect similar functions, but can proteins with totally unrelated sequences have similar structures and functions? In this review, Ken Holmes, Chris Sander and Alfonso Valencia describe the structural similarities between three well-known proteins that have no readily detectable primary sequence similarities but for which X-ray crystallography has revealed very similar structures. A comparison of their structures provides insights into their common mechanisms of action and into protein evolution, and has been used to detect related proteins in sequence data bases.