Boosting Superior Lithium Storage Performance of Alloy‐Based Anode Materials via Ultraconformal Sb Coating–Derived Favorable Solid‐Electrolyte Interphase

Alloy materials such as Si and Ge are attractive as high‐capacity anodes for rechargeable batteries, but such anodes undergo severe capacity degradation during discharge–charge processes. Compared to the over‐emphasized efforts on the electrode structure design to mitigate the volume changes, understanding and engineering of the solid‐electrolyte interphase (SEI) are significantly lacking. This work demonstrates that modifying the surface of alloy‐based anode materials by building an ultraconformal layer of Sb can significantly enhance their structural and interfacial stability during cycling. Combined experimental and theoretical studies consistently reveal that the ultraconformal Sb layer is dynamically converted to Li₃Sb during cycling, which can selectively adsorb and catalytically decompose electrolyte additives to form a robust, thin, and dense LiF‐dominated SEI, and simultaneously restrain the decomposition of electrolyte solvents. Hence, the Sb‐coated porous Ge electrode delivers much higher initial Coulombic efficiency of 85% and higher reversible capacity of 1046 mAh g^?1 after 200 cycles at 500 mA g^?1, compared to only 72% and 170 mAh g^?1 for bare porous Ge. The present finding has indicated that tailoring surface structures of electrode materials is an appealing approach to construct a robust SEI and achieve long‐term cycling stability for alloy‐based anode materials.     

Revisiting the Role of Conductivity and Polarity of Host Materials for Long‐Life Lithium–Sulfur Battery

Despite their high theoretical energy density and low cost, lithium–sulfur batteries (LSBs) suffer from poor cycle life and low energy efficiency owing to the polysulfides shuttle and the electronic insulating nature of sulfur. Conductivity and polarity are two critical parameters for the search of optimal sulfur host materials. However, their role in immobilizing polysulfides and enhancing redox kinetics for long‐life LSBs are not fully understood. This work has conducted an evaluation on the role of polarity over conductivity by using a polar but nonconductive platelet ordered mesoporous silica (pOMS) and its replica platelet ordered mesoporous carbon (pOMC), which is conductive but nonpolar. It is found that the polar pOMS/S cathode with a sulfur mass fraction of 80 wt% demonstrates outstanding long‐term cycle stability for 2000 cycles even at a high current density of 2C. Furthermore, the pOMS/S cathode with a high sulfur loading of 6.5 mg cm^?2 illustrates high areal and volumetric capacities with high capacity retention. Complementary physical and electrochemical probes clearly show that surface polarity and structure are more dominant factors for sulfur utilization efficiency and long‐life, while the conductivity can be compensated by the conductive agent involved as a required electrode material during electrode preparation. The present findings shed new light on the design principles of sulfur hosts towards long‐life and highly efficient LSBs.     

Antiviral Activities of β-Enantiomers of 3′-Substituted-3′-deoxythymidine Analogs

Abstract

Several β-L-3′-substituted-3′-deoxythymidine were stereospecifically synthesized. None of these analogs inhibited HIV-1 nor HBV replication in vitro suggesting that these β-L-pyrimidine derivatives may not be efficiently phosphorylated inside the cells.     

An improved method for micropropagation and regeneration of date palm (Phoenix dactylifera L.)

We developed a novel large-scale micropropagation pathway for date palm (Phoenix dactylifera L.) based on organogenesis. We obtained organogenic stems from shoot tip explants of the Moroccan date palm cultivar Najda, and investigated shoot proliferation from these organogenic stems in vitro on various media; Beauchesne medium (BM) and Murashige and Skoog medium (MS) at full-strength, half-strength, and one-third-strength, containing various concentrations (0, 0.25, 0.5, and 1 mg/L) of 2-naphthoxyacetic acid (NOAA) and kinetin. The optimal medium during the multiplication phase was half-strength Murashige and Skoog medium (MS/2) supplemented with 0.5 mg/L NOAA and 0.5 mg/L kinetin (23.5 morphologically superior shoots per explant, with low vitrification rates). For the shoot elongation phase, shoots were transferred to the same proliferation medium, or to MS or MS/2 media without plant growth regulators (PGRs). Shoots elongated rapidly and showed a high rate of root formation on media supplemented with PGRs. For example, on MS/2 medium containing 1 mg/L NOAA and 1 mg/L kinetin, the average shoot length was 15.1 cm, the average number of roots per shoot was 6.2, and their average length was 3.4 cm. On PGR-free media, shoots were shorter with wider and greener leaves, and had fewer roots. The plantlets were transferred to a greenhouse for acclimation. The survival rate after 2 months was related to the medium used during the elongation phase; >90 % of shoots that were cultured on PGR-free media survived, while there was a poor survival rate of shoots that had been cultured on media containing PGRs.     

3D‐Printed Cathodes of LiMn1−xFexPO4 Nanocrystals Achieve Both Ultrahigh Rate and High Capacity for Advanced Lithium‐Ion Battery

A 3D‐printing technology and printed 3D lithium‐ion batteries (3D‐printed LIBs) based on LiMn_0.21Fe_0.79PO₄@C (LMFP) nanocrystal cathodes are developed to achieve both ultrahigh rate and high capacity. Coin cells with 3D‐printed cathodes show impressive electrochemical performance: a capacity of 108.45 mAh g^?1 at 100 C and a reversible capacity of 150.21 mAh g^?1 at 10 C after 1000 cycles. In combination with simulation using a pseudo 2D hidden Markov model and experimental data of 3D‐printed and traditional electrodes, for the first time deep insight into how to achieve the ultrahigh rate performance for a cathode with LMFP nanocrystals is obtained. It is estimated that the Li‐ion diffusion in LMFP nanocrystal is not the rate‐limitation step for the rate to 100 C, however, that the electrolyte diffusion factors, such as solution intrinsic diffusion coefficient, efficiency porosity, and electrode thickness, will dominate ultrahigh rate performance of the cathode. Furthermore, the calculations indicate that the above factors play important roles in the equivalent diffusion coefficient with the electrode beyond a certain thickness, which determines the whole kinetic process in LIBs. This fundamental study should provide helpful guidance for future design of LIBs with superior electrochemical performance.     

Cooling Induced Surface Reconstruction during Synthesis of High‐Ni Layered Oxides

Transition metal layered oxides have been the dominant cathodes in lithium‐ion batteries, and among them, high‐Ni ones (LiNi_xMn_yCo_zO₂; x ≥ 0.7) with greatly boosted capacity and reduced cost are of particular interest for large‐scale applications. The high Ni loading, on the other hand, raises the critical issues of surface instability and poor rate performance. The rational design of synthesis leading to layered LiNi_0.7Mn_0.15Co_0.15O₂ with greatly enhanced rate capability is demonstrated, by implementing a quenching process alternative to the general slow cooling. In situ synchrotron X‐ray diffraction, coupled with surface analysis, is applied to studies of the synthesis process, revealing cooling‐induced surface reconstruction involving Li₂CO₃ accumulation, formation of a Li‐deficient layer and Ni reduction at the particle surface. The reconstruction process occurs predominantly at high temperatures (above 350 °C) and is highly cooling‐rate dependent, implying that surface reconstruction can be suppressed through synthetic control, i.e., quenching to improve the surface stability and rate performance of the synthesized materials. These findings may provide guidance to rational synthesis of high‐Ni cathode materials.     

Exchange potentials of phosphorus between sediments and water coupled to alkaline phosphatase activity and environmental factors in an oligo-mesotrophic reservoir

We investigated the exchange potentials of phosphates at the water-sediment interface together with in situ benthic-chamber fractionated alkaline phosphatase activity and bacteria estimates during September and October 1998 at two stations: station 1, which received immediately the urban inputs from the Taounate city, and station 2, located in the centre of the Sahela reservoir (Morocco). The results showed that low oxygenation enhanced both the bacterial abundance and the alkaline phosphatase activity. Size-fractionated (0.65-100 microm) bacteria attached to dead organic matter together with algae and zooplankton contributed strongly (78%) to the total alkaline phosphatase synthesis in the two sampled stations, suggesting that attachment to organic particles stimulated phosphatase activities. The appearance of anoxic conditions and the decrease of pH supported the dissolution of particulate phosphorus and the release of soluble reactive phosphorus. This latter, together with persisting discharges of organic matter, sewage, and olive mill waste will exacerbate the eutrophication of the reservoir.