Comparative Study of 1,064-nm Laser-Induced Skin Burn and Thermal Skin Burn

Infrared lasers are widely used in medicine, industry, and other fields. While science, medicine, and the society in general have benefited from the many practical uses of lasers, they also have inherent safety issues. Although several procedures have been put forward to protect the skin from non-specific laser-induced damage, individuals receiving laser therapy or researchers who use laser are still at risk for skin damage. This study aims to understand the interaction between laser and the skin, and to investigate the differences between the skin damage caused by 1,064-nm laser and common thermal burns. Skin lesions on Wistar rats were induced by a 1,064-nm CW laser at a maximum output of 40 W and by a copper brass bar attached to an HQ soldering iron. Histological sections of the lesions and the process of wound healing were evaluated. The widths of the epidermal necrosis and dermal denaturalization of each lesion were measured. To observe wound healing, the epithelial gap and wound gap were measured. Masson’s trichrome and picrosirius red staining were also used to assess lesions and wound healing. The thermal damage induced by laser intensified significantly in both horizontal dimension and in vertical depth with increased duration of irradiation. Ten days after wounding, the dermal injuries induced by laser were more severe. Compared with the laser-induced skin damage, the skin burn induced by an HQ soldering iron did not show a similar development or increased in severity with the passage of time. The results of this study showed the pattern of skin damage induced by laser irradiation and a heated brass bar. This study also highlighted the difference between laser irradiation and thermal burn in terms of skin damage and wound healing, and offers insight for further treatment.     

Theoretical design of energetic nitrogen-rich derivatives of 1,7-diamino-1,7-dinitrimino-2,4,6-trinitro-2,4,6-triazaheptane

The heats of formation (HOFs), energetic properties, and thermal stability of a series of 1,7-diamino-1,7-dinitrimino-2,4,6-trinitro-2,4,6-triazaheptane derivatives with different substituents, different numbers of substituents, and different original chains are found by using the DFT-B3LYP method. The results show that -NO₂ or -NH₂ is an effective substituent for increasing the gas-phase HOFs of the title compounds, especially -NO₂ group. As the numbers of substitutents increase, their HOFs enhance obviously. Increasing the length of original chain is helpful for improving their HOFs. The substitution of -NO₂ is useful for enhancing their detonation performances and the effects of the length of original chains on detonation properties are coupled with those of the substituents. An analysis of the BDE of the weakest bonds indicates that the substitution of the -NH₂ groups and replacing the -NO₂ groups of N-NO₂ by the -NH₂ groups are favorable for improving their thermal stability, while the substitution of -NO₂ and increasing the length of original chain decrease their thermal stability. Considering the detonation performance and thermal stability, seven compounds may be considered as the potential candidates of high energy density compounds.     

First-principles study of the structural transformation, electronic structure, and optical properties of crystalline 2,6-diamino-3,5-dinitropyrazine-1-oxide under high pressure

Periodic first-principles calculations have been performed to study the effect of high pressure on the geometric, electronic, and absorption properties of 2,6-diamino-3,5-dinitropyrazine-1-oxide (LLM-105) under hydrostatic pressures of 0–50 GPa. Obvious irregular changes in lattice constants, unit-cell angles, bond lengths, bond angles, and band gaps showed that crystalline LLM-105 undergoes four structural transformations at 8, 17, 25, and 42 GPa, respectively. The intramolecular H-bonds were strong at pressures of 0–41 GPa but weakened in the range 42–50 GPa. The lengths of the intermolecular H-bonds (<1.47 Å) indicated that these H-bonds have covalent character and tend to induce the formation of a new twelve-membered ring. Analysis of the DOS showed that the interactions between electrons, especially the valence electrons, strengthen under the influence of pressure. The p states play a very important role in chemical reactions of LLM-105. The absorption spectrum of LLM-105 displayed more bands—as well as stronger bands—in the fundamental absorption region when the pressure was high rather than low. A new absorption peak due to O–H stretching appeared at 18.3 eV above 40 GPa, indicating that covalent O–H bonds and a new twelve-membered ring are present in LLM-105.     

乳液法神经生长因子（NGF）电纺纤维的体外研究

目的：使用乳液法制备含有神经生长因子（NGF）的电纺纤维,研究其外观形貌和机械强度等物理性能,以及制备过程中NGF活性的变化,纤维中NGF的担载量和纤维体外释放动力学,评价其能否成为理想的神经修复材料,为进一步将NGF电纺纤维应用于周围神经修复奠定基础。方法：将NGF水溶液分散于PLLA溶液,通过W／O乳液法制备静电纺丝缓释纤维,对纤维的外观形貌等物理性能等进行表征,使用Elisa方法测定制备过程中NGF活性的保持以及体外释放动力学。结果：NGF电纺纤维具备类似细胞外基质（ECM）的良好外观形貌和一定的机械强度,其中NGF活性保持19．58％士6．05％,体外有效释放11天。结论：本文制备的乳液法NGF电纺纤维具备良好的物理性能,能够持续缓释有效剂量的NGF,适合作为神经修复材料进行进一步研究。     

钢渣组分特征及其用于土壤改良的可行性初步研究

通过测定钢渣的化学组成分析得出其组分特征,进一步通过在有降解碱剂HPMA参与的重（轻）度盐碱土壤及钢渣中栽种不同植物种子（玉米、茄子、水稻和长春花）,观察植物的长势,探究钢渣是否可以用于土壤改良。结果发现钢渣的化学成分与土壤基本相同,但部分成分如CaO、Fe₂O₃、MgO、MnO₂等显著高于土壤,而另外一些组分TiO₂、K₂O、Na₂O、P₂O₅在钢渣中未检测出来。对比重（轻）度盐碱土壤,钢渣与HPMA共同作用时,玉米、茄子、水稻和长春花等发芽率及生长速率明显提高;与常用的蛭石、珍珠岩改良剂对比实验中,不同植物存在类似的发芽率和生长速率,说明钢渣可以作为温室土壤结构改良剂;与钢渣产地丰富的树皮土资源配比形成复方改良剂,发现其具有类似花土（泥炭土）的生长速率和发芽率。初步研究表明,钢渣可以用于盐碱地改良,而且对于设施农业的土壤结构改良具有功效,与当地树皮土资源结合,具有形成复方土壤改良剂的潜力。     

脐带问充质干细胞联合表皮生长因子治疗III、Ⅳ期压疮的临床研究

目的：探讨脐带间充质干细胞移植联合表皮生长因子治疗III、Ⅳ期压疮的临床效果。方法：选取我院2011-2012年收治的III、Ⅳ期压疮患者143例为研究对象,随机分为对照组、实验一组和实验二组。对照组30例压疮患者行常规换药,实验一组58例压疮患者应用脐带间充质干细胞移植联合表皮生长因子治疗,实验二组55例压疮患者仅应用表皮生长因子治疗。治疗后,比较三组患者愈合时间及愈合效果。结果：实验一组和实验二组的显效时间和愈合时间均较对照组显著缩短,且实验一组的显效时间和愈合时间较实验二组更短,差异均有统计学意义（均P〈0．05）。实验一组的治愈率显著高于对照组（P〈0．05）,而与实验二组比较无统计学差异（P〉0．05）,实验二组的治愈率与对照组比较无统计学差异（P〈0．05）。实验一组的总有效率显著高于对照组和实验二组（P〈0．05）,而实验二组的总有效率与对照组比较无统计学差异（P〉0．05）。结论：脐带间充质干细胞移植联合表皮生长因子较单用表皮生长因子及常规治疗方法更好的改善III、Ⅳ期压疮创面的愈合,避免患者组织感染,提高压疮患者的生活质量。     

Cyanine 5.5 Conjugated Nanobubbles as a Tumor Selective Contrast Agent for Dual Ultrasound-Fluorescence Imaging in a Mouse Model

Nanobubbles and microbubbles are non-invasive ultrasound imaging contrast agents that may potentially enhance diagnosis of tumors. However, to date, both nanobubbles and microbubbles display poor in vivo tumor-selectivity over non-targeted organs such as liver. We report here cyanine 5.5 conjugated nanobubbles (cy5.5-nanobubbles) of a biocompatible chitosan–vitamin C lipid system as a dual ultrasound-fluorescence contrast agent that achieved tumor-selective imaging in a mouse tumor model. Cy5.5-nanobubble suspension contained single bubble spheres and clusters of bubble spheres with the size ranging between 400–800 nm. In the in vivo mouse study, enhancement of ultrasound signals at tumor site was found to persist over 2 h while tumor-selective fluorescence emission was persistently observed over 24 h with intravenous injection of cy5.5-nanobubbles. In vitro cell study indicated that cy5.5-flurescence dye was able to accumulate in cancer cells due to the unique conjugated nanobubble structure. Further in vivo fluorescence study suggested that cy5.5-nanobubbles were mainly located at tumor site and in the bladder of mice. Subsequent analysis confirmed that accumulation of high fluorescence was present at the intact subcutaneous tumor site and in isolated tumor tissue but not in liver tissue post intravenous injection of cy5.5-nanobubbles. All these results led to the conclusion that cy5.5-nanobubbles with unique crosslinked chitosan–vitamin C lipid system have achieved tumor-selective imaging in vivo.     

Differential Regulation of MAPK Phosphorylation in the Dorsal Hippocampus in Response to Prolonged Morphine Withdrawal-Induced Depressive-Like Symptoms in Mice

Depression is one of the most frequent neuropsychiatric comorbidities associated with opiate addiction. Mitogen activated protein kinase (MAPK) and MAPK phosphatase (MKP) are involved in drug addiction and depression. However, the potential role of MAPK and MKP in depression caused by morphine withdrawal remains unclear. We utilized a mouse model of repeated morphine administration to examine the molecular mechanisms that contribute to prolonged withdrawal induced depressive-like behaviors. Depressive-like behaviors were significant at 1 week after withdrawal and worsened over time. Phospho-ERK (extracellular signal-regulated protein kinase) was decreased and MKP-1 was elevated in the hippocampus, and JNK (c-Jun N-terminal protein kinase), p38 (p38 protein kinase) and MKP-3 were unaffected. A pharmacological blockade of MKP-1 by intra-hippocampal sanguinarine (SA) infusion prevented the development of depressive-like behaviors and resulted in relatively normal levels of MKP-1 and phospho-ERK after withdrawal. Our findings support the association between hippocampal MAPK phosphorylation and prolonged morphine withdrawal-induced depression, and emphasize the MKP-1 as an negative regulator of the ERK phosphorylation that contributes to depression.     

Structures of Streptococcus pneumoniae PiaA and Its Complex with Ferrichrome Reveal Insights into the Substrate Binding and Release of High Affinity Iron Transporters

Iron scarcity is one of the nutrition limitations that the Gram-positive infectious pathogens Streptococcus pneumoniae encounter in the human host. To guarantee sufficient iron supply, the ATP binding cassette (ABC) transporter Pia is employed to uptake iron chelated by hydroxamate siderophore, via the membrane-anchored substrate-binding protein PiaA. The high affinity towards ferrichrome enables PiaA to capture iron at a very low concentration in the host. We presented here the crystal structures of PiaA in both apo and ferrichrome-complexed forms at 2.7 and 2.1 Å resolution, respectively. Similar to other class III substrate binding proteins, PiaA is composed of an N-terminal and a C-terminal domain bridged by an α-helix. At the inter-domain cleft, a molecule of ferrichrome is stabilized by a number of highly conserved residues. Upon ferrichrome binding, two highly flexible segments at the entrance of the cleft undergo significant conformational changes, indicating their contribution to the binding and/or release of ferrichrome. Superposition to the structure of Escherichia coli ABC transporter BtuF enabled us to define two conserved residues: Glu119 and Glu262, which were proposed to form salt bridges with two arginines of the permease subunits. Further structure-based sequence alignment revealed that the ferrichrome binding pattern is highly conserved in a series of PiaA homologs encoded by both Gram-positive and negative bacteria, which were predicted to be sensitive to albomycin, a sideromycin antibiotic derived from ferrichrome.