羌活与宽叶羌活的群体遗传结构和种间分化研究

为了合理利用羌活和宽叶羌活的药用植物资源,同时保护其物种多样性,该研究利用SSR分子标记技术对羌活与宽叶羌活邻域及异域分布的23个自然种群,共计227个个体进行多样性和种间分化研究。结果显示:(1)两个物种具有中等水平的遗传多样性;羌活的平均等位基因数(N_a)、有效等位基因数(N_e)和期望杂合度(H_e)分别为2.603、1.777和0.313,均高于宽叶羌活(分别为2.200、1.641和0.308)。(2)分子方差分析表明,两个物种的遗传变异主要存在于群体内,羌活和宽叶羌活群体间分化系数分别为0.181和0.191。(3)Structure聚类分析和主坐标分析(PCoA)将所有取样个体分为两大遗传组分,分别对应于羌活和宽叶羌活两个物种,二者间存在着有限的基因交流。研究表明,羌活与宽叶羌活物种间存在较高程度的遗传分化,并且遗传变异主要源自群体内,应各自划分为不同的地理单元进行多样性保护。     

中国三种常见蒿属植物潜在地理分布及其主导气候因子

裂叶蒿(Artemisia tanacetifolia)、大籽蒿(Artemisia sieversiana)和艾(Artemisia argyi)是我国常见的蒿属(Artemisia)植物,其分布区域遍布全国。本文利用MaxEnt模型预测3种蒿属植物在当前气候条件以及未来两种气候情景下的潜在分布区。采用受试者工作特征曲线(receiver operating characteristic curve,ROC)检验模型精度。训练数据和测试数据的AUC值均在0.8以上,表明预测结果可靠性良好。在当前的气候条件下,裂叶蒿最适分布区主要为黄土高原、内蒙古高原和东北平原;大籽蒿的最适分布区为西藏南部谷地、横断山地区、黄土高原、内蒙古高原和东北平原;艾的最适分布区有两个,一个位于台湾岛南部,另一个为大巴山、巫山、云贵高原北部、黄土高原和东北平原南部区域。2070年RCP2.6和RCP8.5情景下,裂叶蒿及大籽蒿的高适宜区面积减小,艾的最适分布区面积增加。Jackknife检验结果表明,年均降水量是预测裂叶蒿分布最有效的气候因子,5月降水是预测大籽蒿分布的最显著的气候因子,8月水汽压对艾的影响最大。本研究结果为蒿属植物资源的合理利用提供了科学依据。     

Solvent-Free Synthesis,Characterization, and In Vitro Biological Activity Study of Xanthenediones and Acridinediones

Russian Journal of Bioorganic Chemistry - The present work highlights the broad range of oxygen and nitrogen heterocycles and their applications in medicinal field. A facial approach has been...     

Human Granuloma In Vitro Model,for TB Dormancy and Resuscitation

Tuberculosis (TB) is responsible for death of nearly two million people in the world annually. Upon infection, Mycobacterium tuberculosis (Mtb) causes formation of granuloma where the pathogen goes into dormant state and can live for decades before resuscitation to develop active disease when the immune system of the host is weakened and/or suppressed. In an attempt to better understand host-pathogen interactions, several groups have been developing in vitro models of human tuberculosis granuloma. However, to date, an in vitro granuloma model in which Mtb goes into dormancy and can subsequently resuscitate under conditions that mimic weakening of the immune system has not been reported. We describe the development of a biomimetic in vitro model of human tuberculosis granuloma using human primary leukocytes, in which the Mtb exhibited characteristics of dormant mycobacteria as demonstrated by (1) loss of acid-fastness, (2) accumulation of lipid bodies (3) development of rifampicin-tolerance and (4) gene expression changes. Further, when these micro granulomas were treated with immunosuppressant anti-tumor necrosis factor-alpha monoclonal antibodies (anti-TNFα mAbs), resuscitation of Mtb was observed as has been found in humans. In this human in vitro granuloma model triacylglycerol synthase 1deletion mutant (Δtgs1) with impaired ability to accumulate triacylglycerides (TG), but not the complemented mutant, could not go into dormancy. Deletion mutant of lipY, with compromised ability to mobilize the stored TG, but not the complemented mutant, was unable to come out of dormancy upon treatment with anti-TNFα mAbs. In conclusion, we have developed an in vitro human tuberculosis granuloma model that largely exhibits functional features of dormancy and resuscitation observed in human tuberculosis.     

The early life history of two sympatric New Zealand octopuses: eggs and paralarvae of Octopus huttoni and Pinnoctopus cordiformis

This study combined morphological and morphometric information on egg clutches, egg capsules and paralarvae of two sympatric coastal octopuses from New Zealand waters, Octopus huttoni and Pinnoctopus cordiformis, to provide species-specific traits to identify their early life stages obtained from field surveys. Eggs of O. huttoni (2.5 mm length; 1 mm width) were entwined with one another forming strings that ranged from 11 to 25.8 mm in length. Eggs of P. cordiformis (6.4 mm length; 1.5 mm width) were significantly bigger than those of O. huttoni and were grouped in small clusters of about seven eggs. Paralarvae O. huttoni and P. cordiformis differed in hatching size (1.4 mm versus 3.1 mm mantle length), number of suckers per arm (four versus eight), number of lamellae per outer demibranch (five versus ten) and arrangements of chromatophores in the body surface (29 to 59 versus 91 to 179), respectively. The morphological traits described in hatchlings from the laboratory allowed comparisons with field-collected paralarvae, suggesting that such characters were reliable species-specific patterns to enable a consistent differentiation between the early life stages of these two sympatric species, even in the absence of the brooding female.     

长爪沙鼠肝细胞体外分离培养体系的建立

目的建立长爪沙鼠原代肝细胞分离培养体系。方法以雄性长爪沙鼠为供体,采用组织消化法和Seglen两步灌流法分离肝细胞,以台盼蓝染色检测细胞得率和活率,过碘酸-希夫氏反应(PAS)鉴定肝细胞,倒置显微镜观察肝细胞形态变化,并使用含有多种细胞因子的培养基维持培养。结果组织消化法和Seglen两步灌流法平均每只长爪沙鼠可分别获得肝细胞(1.33±0.34)×107个、(3.97±1.15)×107个,细胞活率分别为(29.4±6.05)%、(80.3±4.56)%,这两种方法在细胞得率及活率方面存在显著差异。肝细胞内因有大量的糖原颗粒,经PAS染色后被染成红色。结果表明肝细胞在贴壁后72 h内,肝细胞形态发生显著变化。结论采用胶原酶经肝门静脉灌流分离肝细胞是一种高效获得肝细胞的方法。各种细胞因子有利于维持肝细胞在体外的生长分化,长爪沙鼠原代肝细胞分离培养体系的建立将为肝脏相关疾病研究和防治药物的开发提供技术支持。     

A Novel Folate-Targeted Nanoliposomal System of Doxorubicin for Cancer Targeting

Targeted drug delivery systems for cancer improves anti-tumor efficacy and reduces systemic toxicity by restricting availability of cytotoxic drugs within tumors. Targeting moieties, such as natural ligands (folic acid, transferrin, and biotin) which are overexpressed on tumors, have been used to enhance liposome-encapsulated drug accumulation within tumors and resulted in better control. In this report, we explored the scope of targeting ligand folic acid, which is incorporated in liposome systems using folic acid-modified cholesterol (CPF), enabled highly selective tumor-targeted delivery of liposome-encapsulated doxorubicin and resulted in increased cytotoxicity within tumors. Folate-tagged poloxamer-coated liposomes (FDL) were found to have significantly higher cellular uptake than conventional poloxamer-coated liposomes (DL), as confirmed by fluorometric analysis in B16F10 melanoma cells. Biodistribution study of the radiolabeled liposomal system indicated the significantly higher tumor uptake of FDL as compared to DL. Anti-tumor activity of FDL against murine B16F10 melanoma tumor-bearing mice revealed that FDL inhibited tumor growth more efficiently than the DL. Taken together, the results demonstrated the significant potential of the folate-conjugated nanoliposomal system for drug delivery to tumors.     

Production of endothelial progenitor cells obtained from human Wharton's jelly using different culture conditions

Endothelial progenitor cells (EPC) participate in revascularization and angiogenesis. EPC can be cultured in vitro from mononuclear cells of peripheral blood, umbilical cord blood or bone marrow; they also can be transdifferentiated from mesenchymal stem cells (MSC). We isolated EPCs from Wharton's jelly (WJ) using two methods. The first method was by obtaining MSC from WJ and characterizing them by flow cytometry and their adipogenic and osteogenic differentiation, then applying endothelial growth differentiating media. The second method was by direct culture of cells derived from WJ into endothelial differentiating media. EPCs were characterized by morphology, Dil-LDL uptake/UEA-1 immunostaining and testing the expression of endothelial markers by flow cytometry and RT-PCR. We found that MSC derived from WJ differentiated into endothelial-like cells using simple culture conditions with endothelium induction agents in the medium.     

Versatility of thermoluminescence materials and radiation dosimetry – A review

Thermoluminescence (TL) materials exhibit a wide range of applications in different areas such as personal dosimetry, environmental dosimetry, medical research etc. Doping of different rare earth impurities in different hosts is responsible for changing the properties of materials useful for various applications in different fields. These materials can be irradiated by different types of beams such as γ‐rays, X‐rays, electrons, neutrons etc. Various radiation regimes, as well as their dose–response range, play an important role in thermoluminescence dosimetry. Several TL materials, such as glass, microcrystalline, nanostructured inorganic materials and recently developed materials, are reviewed and described in this article.