Enhanced reproductive success revealed key strategy for persistence of devastated populations in Himalayan food‐deceptive orchid,Dactylorhiza hatagirea

Anthropogenic disturbances adversely affect populations of rare and endemic plants, resulting in reduction of their population size and performance. Among different plant groups, deceptive terrestrial orchids are vulnerable and possess greater extinction risks because of rarity in occurrence. To understand the response of food‐deceptive terrestrial orchids to disturbances, we selected Dactylorhiza hatagirea as our representative species, which is endemic to Himalaya, and studied its natural populations. This species is rare for being habitat specific, pollination limited and threatened in its natural habitats. We tested the hypothesis that disturbances lead to reduction in population size and plant performance of food‐deceptive terrestrial orchids. For assessing the impact of disturbance, two contrasting groups, heavily devastated (HD) and lightly devastated (LD), were identified on the basis of frequency and intensity of disturbance (harvesting of plant for tubers) by interviewing local people, medicinal plant extractors and shepherds. HD sites, in comparison to LD sites, were found to have smaller population sizes, but showed an increase in plant growth traits (plant height, specific leaf area, leaf N and specific shoot length). Similarly, plants at HD sites were found to have invested less in inflorescence (inflorescence size, inflorescence length, inflorescence length fraction and flowers per length), but despite that showed higher reproductive success. This was a clear indication of enhanced performance of its populations driven by disturbances. Our findings suggested that food‐deceptive species in small populations tend to reduce the probability of population extinction and have the capability to recover rapidly if conserved in time.     

Simultaneous increase in cellular content and volumetric concentration of lipids in <Emphasis Type="Italic">Bracteacoccus bullatus</Emphasis> cultivated at reduced nitrogen and phosphorus concentrations

Manipulation of the nutrient concentration is an inexpensive and efficient method for increasing lipid and TAG accumulation in algal cells. However, high volumetric production requires finding a proper balance between the decrease of biomass production and the increase in the total lipid content. We isolated a strain of green microalga Bracteacoccus bullatus and increased its lipid content from 17 to 59% of biomass dry weight by manipulating of nitrogen and phosphorus content in the medium. The 10-fold reduction of the nitrogen and phosphorus concentration in the medium was the most efficient method of the lipid induction compared to nutrient deplete and high nutrient conditions. The oleic (48–64% mass of total fatty acids) and linoleic (14–24% mass of total fatty acids) acids dominated in the fatty acid profile, thus making this strain a suitable candidate for biodiesel production.     

Different amyloid aggregation of smooth muscles titin in vitro

A comparative study of amyloid properties of the aggregates of smooth muscle titin (SMT) from chicken gizzard was carried out. These aggregates were formed in two solutions: 0.15 M glycine-KOH, pH 7.2–7.4 (SMT(Gly)) and 0.2 M KCl, 10 mM imidazole, pH 7.0 (SMT(KCl)). Electron microscopy data showed that SMT aggregates has an amorphous structure in both cases. The results of atomic-force microscopy demonstrated slight differences in morphology in two types of aggregates. The SMT(Gly) aggregates were represented as branching chains, composed of spherical aggregates approximately 300–500 nm in diameter and up to 35 nm in height. The SMT(KCl) aggregates formed sponge-like structures with strands of 8–10 nm in height. Structural analysis of SMT aggregates by X-ray diffraction revealed the presence of cross-β-sheet structure in the samples under study. In the presence of SMT(Gly) aggregates, thioflavine T fluorescence intensity was higher (~3-fold times) compared with that in the presence of SMT(KCl) aggregates. Congo red-stained SMT(Gly) aggregates had yellow to apple-green birefringence under polarized light, which was not observed for SMT(KCl) aggregates. Dynamic light scattering data showed the similar rate of aggregation for both types of aggregates, though SMT(KCl) aggregates were able to partially disaggregate under increased ionic strength of the solution. The ability of SMT to aggregation followed by disaggregation may be functionally significant in the cell.     

Probing Mitotic CENP-E Kinesin with the Tethered Cargo Motion Assay and Laser Tweezers

Coiled-coil stalks of various kinesins differ significantly in predicted length and structure; this is an adaption that helps these motors carry out their specialized functions. However, little is known about the dynamic stalk configuration in moving motors. To gain insight into the conformational properties of the transporting motors, we developed a theoretical model to predict Brownian motion of a microbead tethered to the tail of a single, freely walking molecule. This approach, which we call the tethered cargo motion (TCM) assay, provides an accurate measure of the mechanical properties of motor-cargo tethering, verified using kinesin-1 conjugated to a microbead via DNA links in vitro. Applying the TCM assay to the mitotic kinesin CENP-E unexpectedly revealed that when walking along a microtubule track, this highly elongated molecule with a contour length of 230 nm formed a 20-nm-long tether. The stalk of a walking CENP-E could not be extended fully by application of sideways force with optical tweezers (up to 4 pN), implying that CENP-E carries its cargo in a compact configuration. Assisting force applied along the microtubule track accelerates CENP-E walking, but this increase does not depend on the presence of the CENP-E stalk. Our results suggest that the unusually large stalk of CENP-E has little role in regulating its function as a transporter. The adjustable stalk configuration may represent a regulatory mechanism for controlling the physical reach between kinetochore-bound CENP-E and spindle microtubules, or it may assist localizing various kinetochore regulators in the immediate vicinity of the kinetochore-embedded microtubule ends. The TCM assay and underlying theoretical framework will provide a general guide for determining the dynamic configurations of various molecular motors moving along their tracks, freely or under force.     

Pre-steady-state kinetic study of substrate specificity of Escherichia coli formamidopyrimidine--DNA glycosylase

Formamidopyrimidine-DNA glycosylase (Fpg) is responsible for removal of 8-oxoguanine (8-oxoG) and other oxidized purine lesions from DNA and can also excise some oxidatively modified pyrimidines [such as dihydrouracil (DHU)]. Fpg is also specific for a base opposite the lesion, efficiently excising 8-oxoG paired with C but not with A. We have applied stopped-flow kinetics using intrinsic tryptophan fluorescence of the enzyme and fluorescence of 2-aminopurine-labeled DNA to analyze the conformational dynamics of Escherichia coli Fpg during processing of good substrates (8-oxoG.C), poor substrates (8-oxoG.A), and substrates of unclear specificity (such as DHU and 8-oxoG opposite T or G). The analysis of fluorescence traces allows us to conclude that when the enzyme encounters its true substrate, 8-oxoG.C, the complex enters the productive catalytic reaction after approximately 50 ms, partitioning the substrate away from the competing dissociation process, while poor substrates linger in the initial encounter complex for longer. Several intermediate ES complexes were attributed to different structures that exist along the reaction pathway. A likely sequence of events is that the damaged base is first destabilized by the enzyme binding and then everted from DNA, followed by insertion of several amino acid residues into DNA and isomerization of the enzyme into a pre-excision complex. We conclude that rejection of the incorrect substrates occurs mostly at the early stage of formation of the pre-eversion recognition complex, supporting the role of indirect readout in damage recognition.     

pyActigraphy: Open-source python package for actigraphy data visualization and analysis

Over the past 40 years, actigraphy has been used to study rest-activity patterns in circadian rhythm and sleep research. Furthermore, considering its simplicity of use, there is a growing interest in the analysis of large population-based samples, using actigraphy. Here, we introduce pyActigraphy, a comprehensive toolbox for data visualization and analysis including multiple sleep detection algorithms and rest-activity rhythm variables. This open-source python package implements methods to read multiple data formats, quantify various properties of rest-activity rhythms, visualize sleep agendas, automatically detect rest periods and perform more advanced signal processing analyses. The development of this package aims to pave the way towards the establishment of a comprehensive open-source software suite, supported by a community of both developers and researchers, that would provide all the necessary tools for in-depth and large scale actigraphy data analyses.     

eIF3j facilitates loading of release factors into the ribosome

eIF3j is one of the eukaryotic translation factors originally reported as the labile subunit of the eukaryotic translation initiation factor eIF3. The yeast homolog of this protein, Hcr1, has been implicated in stringent AUG recognition as well as in controlling translation termination and stop codon readthrough. Using a reconstituted mammalian in vitro translation system, we showed that the human protein eIF3j is also important for translation termination. We showed that eIF3j stimulates peptidyl-tRNA hydrolysis induced by a complex of eukaryotic release factors, eRF1-eRF3. Moreover, in combination with the initiation factor eIF3, which also stimulates peptide release, eIF3j activity in translation termination increases. We found that eIF3j interacts with the pre-termination ribosomal complex, and eRF3 destabilises this interaction. In the solution, these proteins bind to each other and to other participants of translation termination, eRF1 and PABP, in the presence of GTP. Using a toe-printing assay, we determined the stage at which eIF3j functions – binding of release factors to the A-site of the ribosome before GTP hydrolysis. Based on these data, we assumed that human eIF3j is involved in the regulation of translation termination by loading release factors into the ribosome.     

Lodopyridones B and C from a marine sediment-derived bacterium Saccharomonospora sp.

HPLC-UV guided isolation of the culture broth of a marine bacterium Saccharomonospora sp. CNQ-490 has led to the isolation of two new natural products, lodopyridones B and C (1 and 2) along with the previously reported lodopyridone A (3). Their chemical structures were established from the interpretation of 2D NMR spectroscopic data and the comparison of NMR data with the lodopyridone A (3). Lodopyridones B and C (1 and 2) possess the thiazole, and chloroquinoline groups which are characteristic features of these molecules. Lodopyridones A–C show weak inhibitory activities on the β-site amyloid precursor protein cleaving enzyme 1 (BACE1).     

Peptide Finder: mapping measured molecular masses to peptides and proteins

The identification of unknown amino acid sequences of peptides as well as protein identification is of great significance in proteomics. Here, we present a publicly available web application that facilitates a high resolution mapping of measured molecular masses to peptides and proteins, irrespectively of the enzyme/digestion method used. Furthermore, multi-filtering may be applied in terms of measured mass tolerance, molecular mass and isoelectric point range as well as pattern matching to refine the results. This approach serves complementary to the existing solutions for protein identification and gives insights in novel peptides discovery and protein identification at the cases where the identification scores from the other approaches may be below significance threshold. Peptide Finder has been proven useful in proteomics procedures with experimental data from MALDI-TOF. AVAILABILITY: Peptide Finder web-application is available at http://bioserver-1.bioacademy.gr/Bioserver/PeptideFinder/.