Prospect of phytoaccumulation of arsenic by Brassica juncea (L.) in Bangladesh

The phytoaccummulation of arsenic by Brassica juncea (L.) was investigated for varying concentrations selected within the range that is evident in Bangladeshi soil. B. juncea (Rai and BARI-11) was grown in the hydroponic media under greenhouse condition with different concentrations (0.5, 1.0, 15, 30, 50 and 100 ppm) of sodium arsenite. Inductively coupled plasma atomic emission spectroscopy (ICP-AES) was used to analyze the data. Mapping of potential area of phytoaccumulation of arsenic by B. juncea was done using Geographic information system (GIS). Arsenic was detected at lower concentrations (0.5 and 1.0 ppm) only at root system of the plant. For higher concentrations (15, 30, and 50 ppm) arsenic was detected both in the root and shoot systems. The results suggested that at 15 and 50 ppm uptake was higher compared to 30 ppm. For 100 ppm of arsenic no plant growth was observed. In Bangladesh, where concentration of arsenic is at lower level and present only at rooting zone, B. juncea may be used for phytoaccumulation of arsenic keeping usual agronomic practices. However, for higher concentrations, B. juncea can be regarded as a good accumulator of arsenic where uptake of arsenic was up to 1% of total biomass of the plant.     

Adaptation of <Emphasis Type="Italic">Lactobacillus acidophilus</Emphasis> to Thermal Stress Yields a Thermotolerant Variant Which Also Exhibits Improved Survival at pH 2

Loss in probiotic viability upon exposure to stressful storage and transport conditions has plagued the probiotic market worldwide. Lactobacillus acidophilus is an important probiotic that is added to various functional foods. It is known to be fairly labile and susceptible to temperature variations that it encounters during processing and storage which increases production cost. It has been repeatedly demonstrated that pre-exposure to sub-lethal doses of stress, particularly, temperature and pH, leads to improved survival of various probiotics when they subsequently encounter the same stress of a much greater magnitude. Attempts to adapt L. acidophilus to temperatures as high as 65 °C to arrive at a thermotolerant variant have not been reported previously. To improve viability at elevated temperatures, we gradually adapted the L. acidophilus NCFM strain to survival at 65 °C for 40 min. Following adaptation, the variant showed a 2-log greater survival compared to wild-type at 65 °C. Interestingly, this thermotolerant variant also demonstrated a 2-log greater stability compared to wild-type at pH 2.0. The improved pH and temperature stress tolerance exhibited by this variant remained unaltered even when the strain was lyophilized. Moreover, the thermotolerant variant demonstrated improved stability compared to wild-type when stored for up to a week at 37 and 42 °C. Probiotic properties of the variant such as adherence to epithelial cells and antibacterial activity remained unaltered. This strain can potentially help address the issue of significant loss in viable cell counts of L. acidophilus which is typically encountered during probiotic manufacture and storage.     

Application of Cyanidin-3-Glucosides as a functional food ingredient in rice-based bakery products

BackgroundBlack pericarp rice has recently become popular among rice consumers for its diverse health benefits specially anti-cancer effect. Cyanidin-3-Glucosides (C3G), an prominant bioactive component of anthocyanins which is abundantly present in black pericarp rice.ObjectivesWe investigated, how effectively it can be used to fortify Cyanidin-3-Glucosides (C3G) content in red and white pericarp polished rice or rice based bakery products for more nutritional value.MethodIn the present study, we have characterized several black pericarp rice cultivars along with some red pericarp and white pericarp rice cultivars by physicochemical including mineral profiling, and quantified the C3G by UFLC and LCMS.ResultsC3G content was significantly reduced from raw rice to cooked rice condition. All the black pericarp rice cultivars synthesized C3G, while this content was not detected in red and white pericarp rice cultivars. However, when 25% of black pericarp rice were mixed with 75% red or white pericarp polished rice, C3G content was significantly retained in cooked rice conditions. Formulation of rice-based bakery food product using black pericarp rice powder was also remarkably retained the C3G content as compared to that of cooking. Black rice is harder in texture, difficult to digest and needs higher energy for cooking. Therefore, we tried to circumvent these challenges by fortifying 25% of black pericarp rice with white or red pericarp rice.ConclusionFortification of C3G enriched black rice (25%) with red or white pericarp rice (75%) might bring a better nutritional quality in both cooking and baking condition. This may lead a way to the effective management of the non-communicable disease such as cancer for common rice consuming population.     

Removal and recovery of Cu(II) and Zn(II) using immobilized Mentha arvensis distillation waste biomass

The potential use of the immobilized Mentha arvensis distillation waste (IMADW) biomass for removal and recovery of Cu(II) and Zn(II) from aqueous was evaluated in the present study. Biosorption capacity of Cu(II) and Zn(II) on IMADW increased with increase in pH reaching a maximum at 5 for Cu(II) and 6 for Zn(II). The equilibrium sorption data agreed well with Langmuir isotherm model and pseudo-second-order kinetic model in batch mode. Cu(II) and Zn(II) uptake by IMADW was best described by pseudo-first-order kinetic model in continuous mode. Maximum Cu(II) and Zn(II) uptake by IMADW was 104.48 and 107.75 mg/g, respectively. Fourier Transform Infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) were also carried out to investigate functional groups and surface changes of biomass. The results showed that IMADW biomass is a potential biomaterial to remove Cu(II) and Zn(II) ions with a high biosorption capacity from aqueous solutions.     

Hemolin expression in the silk glands of Galleria mellonella in response to bacterial challenge and prior to cell disintegration

Hemolin, a member of the immunoglobulin protein superfamily, functions in Lepidoptera as an opsonin in defence against potential pathogens and seems to play a role in tissue morphogenesis. We show that hemolin gene is expressed in several organs of Galleria mellonella larvae, including the nervous system and the silk glands. The expression in the silk glands of the wandering larvae and their isolated abdomens is enhanced within 6 h after an injection of bacteria, lipopolysaccharides, or peptidoglycans. The magnitude of silk gland response to bacterial challenge is similar to that seen in the fat body. A profound rise of hemolin expression without bacterial inoculation occurs in the silk glands of isolated abdomens when they are induced to pupate by a topical application of 20-hydroxyecdysone (20E). The induction of pupation is associated with silk gland programming for disintegration by apoptosis and phagocytosis. Administration of a juvenile hormone agonist prevents pupation and abolishes the stimulatory 20E effect on the hemolin expression. Hemolin protein can be immunodetected in the silk glands as well as in the spun-out cocoon silk. The results suggest that silk glands are a component of the insect immune system and that hemolin may mark the apoptic cells for the elimination by hemocytes.     

Omega-3 fatty acids concentrate production by enzyme-catalyzed ethanolysis of supercritical CO<Subscript>2</Subscript> extracted oyster oil

The separation of oil by a suitable technique from the Pacific oyster muscle is important for the utilization of the oil as a ω-3 polyunsaturated fatty acids (ω-3 PUFAs) source and production of bio-functional peptides/ oligosaccharides from oil-free residue. This study was conducted to prepare ω-3 PUFAs concentrate from supercritical carbon dioxide (SC-CO₂) extracted Pacific oyster oil by enzyme-catalyzed ethanolysis reactions. SC-CO₂ extractions were done at different temperatures and pressures to optimize suitable extraction conditions and extracted oils were compared with Soxhlet (n-hexane) extracted oil to evaluate the yield and quality. Oil extracted by SC-CO₂ at optimized conditions was used for ethanolysis reaction catalyzed by immobilized sn-1,3 specific lipases, namely Novozymes-435, Lipozyme TLIM, and Lipozyme RMIM to produce 2-monoacylglycerols (2-MAG) rich in ω-3 PUFAs. The optimum temperature and pressure for SC-CO₂ extractions of oyster oil was 50°C and 30 MPa. In this condition, the yield of oil was 5.96% and the acid, peroxide, free fatty acid, and p-anisidine values were 4.49 mg KOH/g, 4.72 meq/kg, 3.42%, and 10.03, respectively. The ω-3 PUFAs content significantly increased in 2-MAG obtained from Novozymes 435, Lipozyme TLIM, and Lipozyme RMIM to 43.03 ± 0.36, 45.95 ± 0.29, and 40.50 ± 0.77%, respectively (p < 0.05). A thin layer chromatography (TLC) analysis confirmed the production and separation of 2-MAG in the ethanolysis process. The ratio of total ω-3 to ω-6 fatty acids was almost twice in 2-MAG of SC-CO₂ extracted oyster oil. SC-CO₂ extracted Pacific oyster oil can be used for sn-1,3 specific lipases catalyzed ethanolysis to produce ω-3 PUFAs rich in 2-MAG.     

Characterization of laser produced plasma using laser induced breakdown spectroscopy

The plasma parameter studies of the Nd:YAG (neodymium-doped yttrium aluminum garnet, Nd:Y₃Al₁₅O₁₂) crystal by using the fundamental (1064 nm) and second (532 nm) harmonics of Nd:YAG laser are reported. The electron temperature (T _e ) and electron number density (N _e) were determined using the Boltzmann plot method and the Stark-broadened line profile, respectively. An increase in the plasma parameters have been observed with an increase in the laser irradiance for both laser modes. The electron temperatures were calculated in the range of 0.53–0.66 eV for 1064 nm and 0.47–0.60 eV for 532 nm, and the electron number densities were determined in the range of 7.43 × 10¹⁵–3.27 × 10¹⁶ cm^?3 for 1064 nm and 1.35 × 10¹⁶–3.97 × 10¹⁶ cm^?3 for 532 nm in the studied irradiance range of 1.19–12.5 GW/cm². However, the spatial evolution of the plasma parameters investigated up to 2.75 mm away from the target surface at a fixed laser irradiance of 6.51 GW/cm2 showed a decreasing trend. In addition, the estimated values of the inverse bremsstrahlung (IB) absorption coefficients at both laser wavelengths showed that the IB process is dominant for the 1064-nm laser.