Health risk assessment due to exposure of arsenic contamination in drinking water of district Shiekhupura,Punjab, Pakistan

Abstract

The present study was conducted to assess the magnitude and health impacts of As in drinking water. Drinking water samples (n?=?60) were collected from twenty different sites of Shiekhupura District (Pakistan). Health risk assessment through average daily dose (ADD), hazard indices (HI), hazard quotient (HQ), carcinogenic risk (CR), and cancer indices (CI) for dermal and oral exposure were determined. Results revealed that As concentration ranged from 2 to 900?µg?L^?1 in water samples, which was significantly greater than the safe limit of As (10?µg?L^?1) in water. Health risk assessment of As showed that ADD (1.07E?02–9.85E?04), HQ (1.06E+01–9.85E+00), and CR (1.60E?02–9.85E?04) for oral exposure and ADD (1.03E?05–9.69E?06), HQ (1.19E?02–7.96E?03), and CR (1.11E?05–8.98E?05) for dermal exposure which were exceeded the toxic risk index value. Comparison of the two exposure pathways indicated that the oral exposure is much higher risk than the dermal contact. Both values of HI and CI were greater than WHO limit. It is concluded that residents of study area are at higher risk of As induced diseases and carcinogenicity.     

Specific monitoring of aflatoxin M1 in real samples using aptamer binding to DNFS based on turn‐on method: A novel biosensor

In the present work, a novel biocompatible scaffold was fabricated for the DNA aptamer immobilization. For the first time, amino‐functionalized dendritic fibrous nanosilica (KCC‐1‐nPr‐NH₂) and gold nanoparticle supported by chitosan (AuNPs‐CS) were synthesized and electrodeposited successfully on the surface of the glassy carbon electrode by chronoamperometry technique. Unique oligonucleotide of aflatoxin M1 (5′‐ATC CGT CAC ACC TGC TCT GAC GCT GGG GTC GAC CCG GAG AAA TGC ATT CCC CTG TGG TGT TGG CTC CCG TAT) labeled by toluidine blue was immobilization on the prepared interface. Hence, a novel aptamer‐based bioassay was formed for highly sensitive quantitation of AFM1 using cyclic voltammetry and differential plus voltammetry. The structure and morphology of GQDs‐CS/KCC‐1‐nPr‐NH₂ were investigated by Fourier‐transform infrared spectroscopy, X‐ray diffraction, atomic force, scanning electron microscopy, and energy‐dispersive X‐ray spectroscopy. The achieved low limit of quantification of apta‐assay for detection of AFM1 was 10fM. Also, calibration curve was linear from 0.1μM to 10fM in real samples. The proposed apta‐assay has acceptable long‐term stability. Designed aptasensor has a lot of remarkable advantages including excellent selectivity, sensitivity, and stability that could be used as facile bio‐device for the determination of AFM1 in milk samples.     

A novel electroconductive interface based on Fe3O4 magnetic nanoparticle and cysteamine functionalized AuNPs: Preparation and application as signal amplification element to minoring of antigen‐antibody immunocomplex and biosensing of prostate cancer

In this study, a novel electroconductive interface was prepared based on Fe₃O₄ magnetic nanoparticle and cysteamine functionalized gold nanoparticle. The engineered interface was used as signal amplification substrate in the electrochemical analysis of antibody‐antigen binding. For this purpose, biotinilated‐anti‐prostate‐specific antigen (PSA) antibody was bioconjugated with iron oxide magnetic nanoparticles (Fe₃O₄) and drop‐casted on the surface of glassy carbon electrode (GCE). Also, secondary antibody (HRP‐Ab2) encapsulated on gold nanoparticles caped by cysteamine was immobilized on the surface of GCE modified electrode. A transmission electron microscopy images shows that a sandwich immunoreaction was done and binding of Ab1 and Ab2 performed successfully. Various parameters of immunoassay, including the loading of magnetic nanoparticles, the amount of gold nanoparticle conjugate, and the immunoreaction time, were optimized. The detection limit of 0.001 μg. L^?1 of PSA was obtained under optimum experimental conditions. It is found that such magneto‐bioassay could be readily used for simultaneous parallel detection of multiple proteins by using multiple inorganic metal nanoparticle tracers and are expected to open new opportunities for early stage diagnosis of cancer in near future.     

Sensitive monitoring of riboflavin in commercial multivitamins using poly (chitosan)‐based nanocomposite

The rapid and sensitive determination of riboflavin (RF) is important for the treatment of seborrheic and glossitis dermatitis, sunlight sensitivity, mucosal, and skin disorders. In this work, an electrochemical sensor was developed by electrodes modification using poly (chitosan) to sensitive detection of RF in commercial multivitamin. Electrodeposition of chitosan on the surface of glass carbon electrode was performed using cyclic voltammetry technique in the range of ?1 to +1 V. The modified electrode surface morphology was characterized using a high‐resolution field emission scanning electron microscope. The modified electrode was used as an effective electrical interface for the detection of RF using cyclic, differential pulse, and square wave voltammetry techniques. Finally, the sensor was applied to determine RF in commercial multivitamins. In optimum conditions, the linear range for the standard sample of RF and commercial multivitamins 94 to 333μM and 24.6 to 176μM were obtained, respectively. Low limit of quantification (LLOQ) were obtained as 24.6μM.     

ATP binding cassette transporters ABCG1 and ABCG16 affect reproductive development via auxin signalling in Arabidopsis

Angiosperm reproductive development is a complex event that includes floral organ development, male and female gametophyte formation and interaction between the male and female reproductive organs for successful fertilization. Previous studies have revealed the redundant function of ATP binding cassette subfamily G (ABCG) transporters ABCG1 and ABCG16 in pollen development, but whether they are involved in other reproductive processes is unknown. Here we show that ABCG1 and ABCG16 were not only expressed in anthers and stamen filaments but also enriched in pistil tissues, including the stigma, style, transmitting tract and ovule. We further demonstrated that pistil‐expressed ABCG1 and ABCG16 promoted rapid pollen tube growth through their effects on auxin distribution and auxin flow in the pistil. Moreover, disrupted auxin homeostasis in stamen filaments was associated with defective filament elongation. Our work reveals the key functions of ABCG1 and ABCG16 in reproductive development and provides clues for identifying ABCG1 and ABCG16 substrates in Arabidopsis.     

Genetic assessment of the internal transcribed spacer region (ITS1.2) in Mangifera indica L. landraces

Mango (Mangifera indica) is one of the most important tropical fruits in the world. Twenty-two genotypes of native mangoes from different regions of southern Iran (Hormozgan and Kerman) were collected and analyzed for the ribosomal genes. GC content was found to be 55.5%. Fu and Li’s D* test statistic (0.437), Fu and Li’s F* test statistic (0.500) and Tajima’s D (1.801) were positive and nonsignificant. A total of 769 positions were identified (319 with insertion or deletion including 250 polymorphic and 69 monomorphic loci; 450 loci without any insertion or deletion including 35 Singletons and 22 haplotypes). Nucleotide diversity of 0.309 and a high genetic differentiation including Chi square of 79.8; P value of 0.3605 and df value of 76 was observed among mango genotypes studied. The numerical value of the ratio dN/dS (0.45) indicated a pure selection in the examined gene and the absence of any key changes. Cluster analysis differentiated the mango used in this research (M. indica L.) into two genotypes but could not differentiate their geographical locations. The results of this study indicated that a high genetic distance exists between HajiGholam (Manojan) and Arbabi (Rodan) genotypes and showed higher genetic diversity in mango of Rodan region. Results of present study suggested that for successful breeding, the genotypes of Rodan region mango especially Arbabi mango can be used as a gene donor and ITS can be a suitable tool for genetic evaluations of inter and intra species.     

Plant growth regulators improve growth,photosynthesis, mineral nutrient and antioxidant system under cadmium stress in menthol mint ( Mentha arvensis L.)

Menthol mint (Mentha arvensis L.) cultivation is significantly affected by the heavy metals like cadmium (Cd) which also imposes severe health hazards. Two menthol mint cultivars namely Kosi and Kushal were evaluated under Cd stress conditions. Impact of plant growth regulators (PGRs) like salicylic acid (SA), gibberellic acid (GA3) and triacontanol (Tria) on Cd stress tolerance was assessed. Reduced growth, photosynthetic parameters, mineral nutrient concentration, and increased oxidative stress biomarkers like electrolyte leakage, malondialdehyde, and hydrogen peroxide contents were observed under Cd stress. Differential upregulation of proline content and antioxidant activities under Cd stress was observed in both the cultivars. Interestingly, low electrolyte leakage, lipid peroxidation, hydrogen peroxide and Cd concentration in leaves were observed in Kushal compared to Kosi. Among all the PGRs tested, SA proved to be the best in improving Cd-stress tolerance in both the cultivars but Kushal responded better than Kosi.     

Optimization of the demineralization process for the extraction of chitin from Omani Portunidae segnis

Chitin is an organic polymer and it is the most frequent marine natural polysaccharide after cellulose. The main natural sources of chitin are exoskeletons of insects, mollusks, the cell walls of certain fungi and crustaceans such as crabs, shrimps and lobsters. The waste of these marine exoskeletons are pollutant for the environment, but these waste raw materials could be useful for production of commercial products like chitin. Chitin is an important raw material used for water treatment, agricultural, biomedical, biotechnological purposes, food and paper industry and cosmetics. Based on the variety of importance, the present targets of this study are to optimize the demineralization process for the removal of calcium and phosphate contents from the waste of Portunidae segnis (P. segnis) by using acid at ambient temperature and to characterize the isolated demineralized sample as well as the percentage of remaining calcium and phosphorus contents by using Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES). The prepared waste carbs coarse powder samples of P. segnis were demineralized with seven different concentrations of hydrochloric acid at ambient temperature for 1 h. All the demineralization samples by the different concentrations were analyzed by using sensitive ICP-OES. The results based on ICP-OES showed that among the seven different concentrations used in the demineralization process for the isolation of chitin, the best was 2 M of HCl concentration for the production of chitin. The results also showed that the optimized concentration 2 M HCl gave the minimum concentration of calcium and phosphorus compared to other concentrations applied in this experiment. In conclusion, the optimized concentration for demineralization process could be used commercially for the isolation or commercial production of chitin for agricultural, biomedical and biotechnological purposes.     

Phenotypic and Molecular Assessment of Wheat Genotypes Tolerant to Leaf Blight,Rust and Blast Diseases

Globally among biotic stresses, diseases like blight, rust and blast constitute prime constraints for reducing wheat productivity especially in Bangladesh. For sustainable productivity, the development of disease-resistant lines and high yielding varieties is vital and necessary. This study was conducted using 122 advanced breeding lines of wheat including 21 varieties developed by Bangladesh Wheat and Maize Research Institute (BAMRI) with aims to identify genotypes having high yield potential and resistance to leaf blight, leaf rust and blast diseases. These genotypes were evaluated for resistance against leaf blight and leaf rust at Dinajpur and wheat blast at Jashore under field condition. Out of 122 genotypes tested, 20 lines were selected as resistant to leaf blight based on the area under the diseases progress curve (AUDPC) under both irrigated timely sown (ITS) and irrigated late sown (ILS) conditions. Forty-two genotypes were found completely free from leaf rust infection, 59 genotypes were identified as resistant, and 13 genotypes were identified as moderately resistant to leaf rust. Eighteen genotypes were immune against wheat blast, 42 genotypes were categorized as resistant, and 26 genotypes were identified as moderately resistant to wheat blast. Molecular data revealed that the 16 genotypes showed a positive 2NS segment among the 18 immune genotypes selected against wheat blast under field conditions. The genotypes BAW 1322, BAW 1295, and BAW 1203 can be used as earlier maturing genotypes and the genotypes BAW 1372, BAW 1373, BAW 1297 and BAW 1364 can be used for lodging tolerant due to short plant height. The genotypes WMRI Gom 1, BAW 1349 and BAW 1350 can be selected for bold grain and the genotypes WMRI Gom 1, BAW 1297, BAW 1377 can be used as high yielder for optimum seeding condition but genotypes BAW 1377 and BAW 1366 can be used for late sown condition. The selected resistant genotypes against specific diseases can be used in the further breeding program to develop wheat varieties having higher disease resistance and yield potential.