The biology and morphology of the marine harpacticoid copepod Heteropsyllus nunni Coull, during encystment diapause

Heteropsyllus nunni Coull, a meiobenthic harpacticoid copepod is the marine crustacean to undergo a state of diapause within a cyst. A 12 month field study indicated H. nunni adults reached peak population densities in winter, with nauplii maturing in the spring, becoming adults by April or May.At the last stage of development, a mature but unmated adult, they begin to prepare for encystment diapause. The copepods remain within their cyst in a state of diapause for 3–4 months during the summer only. Studies on the effects of temperature and photoperiod suggested that these two environmental cues are not crucial for induction or termination of diapause. Low temperature delayed development and time to encystment, while high temperatures accelerated development, making the time to encystment shorter. There were males than females in the cysts in laboratory experiments. Upon excystment, the copepods mate, and females begin egg production within one week. Adults that have excysted and mated die after a few weeks of active reproductive effort. Nauplii go on to mature and begin the univoltine diapause/reproductive cycle.The copepods prepare for dormancy in two ways: they begin to produce and store two types of secretory products to be used in cyst construction; then they produce large quantities of lipid to be used as a nutrient supply throughout diapause. Histochemistry of the cyst-building material indicated the lower urosome is full of two chemically different products. Dorsally, there is a storage sac of proteinaceous material. The ventral sac of secretory product is a mucopolysaccharide. The copepod builds the spherical cysts in a matrix of small and large sand grains. The cysts fit tightly around the ventral portion of the animal in the its flexed position: however, there is a large space between the cyst and the sides of the copepod.Biochemical analysis of the cyst showed it is composed of an amino acid complex similar to collagenous material. Scanning electron microscopy revealed a complex of large cuticular pores located in the lower urosome and caudal rami. There are specific pores for secretion of the two cyst-building products.     

Cloning and molecular analysis of the bifunctional dihydrofolate reductase-thymidylate synthase gene in the ciliated protozoanParamecium tetraurelia

We have cloned the first bifunctional gene dihydrofolate reductase-thymidylate synthase (DHFR-TS) from a free-living, ciliated protozoan,Paramecium tetraurelia, and determined its macronuclear sequence using a modified ligation-mediated polymerase chain reaction (PCR) that can be of general use in cloning strategies, especially where cDNA libraries are limiting. While bifunctional enzyme sequences are known from parasitic protozoa, none had previously been found in free-living protozoa. The AT-rich (68%) coding region spanning 1386 bp appears to lack introns. DHFR-TS localizes to a 500 kb macronuclear chromosome and is transcribed as an mRNA of 1.66 kb, predicted to encode a 53 kDa protein of 462 residues. The N-terminal one-third of the protein is encoded by DHFR, which is joined by a short junctional peptide of 12 amino acids to the highly conserved C-terminal TS domain. Among known DHFR-TS sequences, theP. tetraurelia gene is most similar to that fromToxoplasma gondii, based on primary sequence and parsimony analyses. The predicted secondary protein structure is similar to those of previously crystallized monofunctional sequences.     

Uptake and transformation of metals and metalloids by microbial mats and their use in bioremediation

Summary Constructed microbial mats, used for studies on the removal and transformation of metals and metalloids, are made by combining cyanobacteria inoculum with a sediment inoculum from a metal-contaminated site. These mats are a heterotrophic and autotrophic community dominated by cyanobacteria and held together by slimy secretions produced by various microbial groups. When contaminated water containing high concentrations of metals is passed over microbial mats immobilized on glass wool, there is rapid removal of the metals from the water. The mats are tolerant of high concentrations of toxic metals and metalloids, such as cadmium, lead, chromium, selenium and arsenic (up to 350 mg L^–1). This tolerance may be due to a number of mechanisms at the molecular, cellular and community levels. Management of toxic metals by the mats is related to deposition of metal compounds outside the cell surfaces as well as chemical modification of the aqueous environment surrounding the mats. The location of metal deposition is determined by factors such as redox gradients, cell surface micro-environments and secretion of extra-cellular bioflocculents. Metal-binding flocculents (polyanionic polysaccharides) are produced in large quantities by the cyanobacterial component of the mat. Steep gradients of redox and oxygen exist from the surface through the laminated strata of microbes. These are produced by photosynthetic oxygen production at the surface and heterotrophic consumption in the deeper regions. Additionally, sulfur-reducing bacteria colonize the lower strata, removing and utilizing the reducing H₂S, rather than water, for photosynthesis. Thus, depending on the chemical character of the microzone of the mat, the sequestered metals or metalloids can be oxidized, reduced and precipitated as sulfides or oxides. For example precipitates of red amorphous elemental selenium were identified in mats exposed to selenate (Se-VI) and insoluble precipitates of manganese, chromium, cadmium, cobalt, and lead were found in mats exposed to soluble salts of these metals. Constructed microbial mats offer several advantages for use in the bioremediation of metal-contaminated sites. These include low cost, durability, ability to function in both fresh and salt water, tolerance to high concentrations of metals and metalloids and the unique capacity of mats to form associations with new microbial species. Thus one or several desired microbial species might be integrated into mats in order to design the community for specific bioremediation applications.     

Maintenance of Weight Loss: A Needs Assessment

This study identified facilitators and obstacles to maintenance of weight loss following a very-low-calorie-diet and behavior modification program. A survey was mailed to a random sample of 178 program completers and received a 61% response rate; the most frequent follow-up period was more than 2 years. Twenty-nine percent reported weighing the same (within 10 lbs) or less than the end of their participation in the treatment program (maintainers), while 71% reported their present weight was a mean of 65% higher than their initial weight loss (regainers). Maintainers were significantly more likely to report engaging in regular aerobic exercise, attending a maintenance support group, and confidence in their ability to manage their weight in the future, while regainers were more likely to report stress and motivation as frequent weight management obstacles. Respondents consistently identified the need for low/no cost ongoing support. Maintainers and relapsers reported similar challenges in managing their weight, yet with different results, suggesting the need to identify subgroups for which different post-treatment support options could be applied.     

Increase in total protein following infection of CV-1 cells with SV40 virus as assayed by flow cytometry

Summary The changes in cell size and total protein were determined for G1-arrested, contact-inhibited CV-1 cells infected with Simian virus 40 (SV40). The assays used were the Biorad total protein assays (Bradford and DC protein assays) on a standard number of cells, total protein as assayed by fluorescein isothiocyanate (FITC) and SR101 by flow cytometry, orthoganol (90°) light scatter by flow cytometry, and direct microscopic measurement with an ocular micrometer. Uninfected CV-1 cells and two cell lines with variations in DNA content (diploid vs. tetraploid) were used as controls for the studies presented. The results demonstrated a 40–60% increase in total protein at 32 to 42 h postinfection. These increases were similar to values obtained as control cells progress through the cell cycle. At later times postinfection (>42 h), total protein decreased due to cellular changes resulting from viral replication and cell death.     

Invited Review Free Radicals in Foods

During the last decade increasing attention has been given to the role of free radicals in biological oxidations. The subject has been of increasing interest to both the food scientist and the physiologist. Free radical scavengers in the form of both indigenous and added antioxidants are necessary for the successful preservation of food; free radicals are increasingly being implicated in the onset of, among others, ischaemic heart disease and for protection against these diseases it is suggested that the dietary intake of the antioxidant vitamins should be increased especially for diets high in polyunsaturated fats. ^1,2 Convenience and snack foods which absorb substantial amounts of frying oils are being increasingly consumed. Since poly-unsaturated fatty acids are particularly susceptible to oxidation by free radicals during the storage, cooking and frying of foods, the potential risk of exposure to lipid degradation products' is likely to have increased. In foods the non-enzymic and lipoxygenase catalysed oxidation of polyunsaturated fatty acids, β-carotene and vitamin A can result in the loss of essential nutrients and the development of off-flavours.     

Time-course of Biosynthesis of Phenolics and Lignin in Roots of Wheat Genotypes Differing in Manganese Efficiency and Resistance to Take-all Fungus

Inhibition of lignin biosynthesis in Triticum aestivum L. rootsby Mn deficiency has been suggested as the mechanism of reducedresistance of Mn-deficient wheat roots to infection by the take-allfungus (Gaeumannomyces graminis var. tritici). This study evaluatedphenolics and lignin accumulation in roots of wheat genotypesdiffering in Mn efficiency (measured as growth and yield inMn-deficient soils) and take-all resistance. Seedlings of theMn-inefficient, take-all sensitive genotype Bayonet and theMn-efficient, more take-all resistant genotype C8MM were grownin nutrient solution without added Mn for 18 d and then transferredto a Mn-deficient sandy soil fertilized with Mn at 0 or 30 mgkg^-1. Both genotypes had Mn-deficient roots and shoots at thetime of transfer to the soil. Roots of both genotypes were inoculatedwith the take-all fungus 0, 1, 3 and 7 d after transfer. Twenty-fourhours after inoculation, take-all fungus penetrated the rootstele of take-all sensitive Bayonet but not of more resistantC8MM wheat. Rates of phenolics and lignin accumulation in rootsdeclined steadily during growth in soil for up to 8 d, werehigher in mature, fully differentiated parts of the root systemcompared to distal, younger root tissue, and were higher inBayonet than in C8MM. Manganese fertilization did not significantlyinfluence rates of phenolics and lignin accumulation but reduceddepth of radial penetration by hyphae in both genotypes. Therate of phenolics accumulation was positively (r = 0·91to 0·96) correlated with the rate of lignin accumulation.Mn-efficient C8MM had a higher rate of lignin accumulation perunit of phenolics than Mn-inefficient Bayonet over a wide rangeof phenolics synthesis rates. From this we suggest that C8MMhas a more efficient mechanism for conversion of phenolics tolignin, the trait which appears related to higher take-all resistanceof this genotype.Copyright 1994, 1999 Academic Press Gaeumannomyces graminis var. tritici, lignin, manganese, phenolics, resistance, roots, Triticum aestivum     

Use of Genetic and Physical Mapping to Locate the Spinal Muscular Atrophy Locus between Two New Highly Polymorphic DNA Markers

The gene for autosomal recessive forms of spinal muscular atrophy (SMA) has recently been mapped to chromosome 5ql3, within a 4-cM region between the blocks D5S465/D5S125 and MAP-1B/D5S112. We identified two new highly polymorphic microsatellite DNA markers—namely, AFM265wf5 (D5S629) and AFM281yh9 (D5S637)—which are the closest markers to the SMA locus. Multilocus analysis by the location-score method was used to establish the best estimate of the SMA gene location. Our data suggest that the most likely location for SMA is between locus D5S629 and the block D5S637/D5S351/MAP-1B/D5S112/D5S357. Genetic analysis of inbred SMA families, based on homozygosity by descent and physical mapping using mega-YACs, gave additional information for the loci order as follows: cen–D5S6–D5S125/D5S465–D5S435–D5S629–SMA–D5S637–D5S351–MAP–1B/D5S112–D5S357–D5S39–tel. These data give the direction for bidirectional walking in order to clone this interval and isolate the SMA gene.