Variability in reproductive traits in Jatropha curcas L. accessions during early developmental stages under warm subtropical conditions

Variability in floral, fruit, and seed characteristics, and oil content of 15 accession of Jatropha curcas during early development were assessed during two flowering periods in south Florida subtropical climate. The two flowering periods had leaf flushing in March. Field evaluation using 18 quantitative traits showed significant variation among accessions. The number of female flowers and female : male flower ratio ranged from 1 to 15 and 1 : 8.8 to 1 : 67.8, respectively. Fruit set by natural pollination was 89 and 66% during the first (1st) and second (2nd) flowering periods, respectively. A higher number of female‐type inflorescences were observed during summer. There were significant differences in seed traits, except for number of seeds per fruit. Accession TREC 31 had the highest individual seed dry weight and 100‐seed weight (0.83 g and 79.7 g, respectively). The oil content varied from 19.30% to 35.62%. Seed dry weight had positive correlation with seed fresh weight, seed length, seed thickness, seed width, and 100‐seed weight, but negative correlation with oil content. Based on the cluster analysis using 15 morphological traits, jatropha accessions were grouped into five main clusters and accessions from different geographic regions grouped together in a cluster. Principal component analyses (PCA) revealed morphological variation. The first three components explained 73.5% of the total variation and seed dry weight, 100‐seed weight, total flowers per inflorescence, male flowers per inflorescence and fruit set can be used to distinguish accessions. The PCA also indicated that flowering traits were more influenced by seed origin while seed traits were affected by flowering spans. Although evaluations were performed in plants during the juvenile phase, accessions TREC 31 and TREC 55 had superior averages for almost all characters evaluated. These results provide a preliminary assessment of the high variability in jatropha accessions evaluated and their potential for use in breeding and genetic improvement programs.     

The clinicopathological and gene expression patterns associated with ulceration of primary melanoma

Ulceration of primary melanomas is associated with poor prognosis yet is reported to predict benefit from adjuvant interferon. To better understand the biological processes involved, clinicopathological factors associated with ulceration were determined in 1804 patients. From this cohort, 348 primary tumor blocks were sampled to generate gene expression data using a 502‐gene cancer panel and 195 blocks were used for immunohistochemistry to detect macrophage infiltration and vessel density. Gene expression results were validated using a whole genome array in two independent sample sets. Ulceration of primary melanomas was associated with more proliferative tumors, tumor vessel invasion, and increased microvessel density. Infiltration of tumors with greater number of macrophages and gene expression pathways associated with wound healing and up‐regulation of pro‐inflammatory cytokines suggests that ulceration is associated with tumor‐related inflammation. The relative benefit from interferon reported in patients with ulcerated tumors may reflect modification of signaling pathways involved in inflammation.     

Alphavirus Replicon DNA Expressing HIV Antigens Is an Excellent Prime for Boosting with Recombinant Modified Vaccinia Ankara (MVA) or with HIV gp140 Protein Antigen

Vaccination with DNA is an attractive strategy for induction of pathogen-specific T cells and antibodies. Studies in humans have shown that DNA vaccines are safe, but their immunogenicity needs further improvement. As a step towards this goal, we have previously demonstrated that immunogenicity is increased with the use of an alphavirus DNA-launched replicon (DREP) vector compared to conventional DNA vaccines. In this study, we investigated the effect of varying the dose and number of administrations of DREP when given as a prime prior to a heterologous boost with poxvirus vector (MVA) and/or HIV gp140 protein formulated in glucopyranosyl lipid A (GLA-AF) adjuvant. The DREP and MVA vaccine constructs encoded Env and a Gag-Pol-Nef fusion protein from HIV clade C. One to three administrations of 0.2 μg DREP induced lower HIV-specific T cell and IgG responses than the equivalent number of immunizations with 10 μg DREP. However, the two doses were equally efficient as a priming component in a heterologous prime-boost regimen. The magnitude of immune responses depended on the number of priming immunizations rather than the dose. A single low dose of DREP prior to a heterologous boost resulted in greatly increased immune responses compared to MVA or protein antigen alone, demonstrating that a mere 0.2 μg DREP was sufficient for priming immune responses. Following a DREP prime, T cell responses were expanded greatly by an MVA boost, and IgG responses were also expanded when boosted with protein antigen. When MVA and protein were administered simultaneously following multiple DREP primes, responses were slightly compromised compared to administering them sequentially. In conclusion, we have demonstrated efficient priming of HIV-specific T cell and IgG responses with a low dose of DREP, and shown that the priming effect depends on number of primes administered rather than dose.     

A Multi-Area Stochastic Model for a Covert Visual Search Task

Decisions typically comprise several elements. For example, attention must be directed towards specific objects, their identities recognized, and a choice made among alternatives. Pairs of competing accumulators and drift-diffusion processes provide good models of evidence integration in two-alternative perceptual choices, but more complex tasks requiring the coordination of attention and decision making involve multistage processing and multiple brain areas. Here we consider a task in which a target is located among distractors and its identity reported by lever release. The data comprise reaction times, accuracies, and single unit recordings from two monkeys’ lateral interparietal area (LIP) neurons. LIP firing rates distinguish between targets and distractors, exhibit stimulus set size effects, and show response-hemifield congruence effects. These data motivate our model, which uses coupled sets of leaky competing accumulators to represent processes hypothesized to occur in feature-selective areas and limb motor and pre-motor areas, together with the visual selection process occurring in LIP. Model simulations capture the electrophysiological and behavioral data, and fitted parameters suggest that different connection weights between LIP and the other cortical areas may account for the observed behavioral differences between the animals.     

Accumulation of Trace Metals by Mangrove Plants in Indian Sundarban Wetland: Prospects for Phytoremediation

The work investigates on the potential of ten mangrove species for absorption, accumulation and partitioning of trace metal(loid)s in individual plant tissues (leaves, bark and root/pneumatophore) at two study sites of Indian Sundarban Wetland. The metal(loid) concentration in host sediments and their geochemical characteristics were also considered. Mangrove sediments showed unique potential in many- fold increase for most metal(loid)s than plant tissues due to their inherent physicochemical properties. The ranges of concentration of trace metal(loid)s for As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb and Zn in plant tissue were 0.006–0.31, 0.02–2.97, 0.10–4.80, 0.13–6.49, 4.46–48.30, 9.2–938.1, 0.02–0.13, 9.8–1726, 11–5.41, 0.04–7.64, 3.81–52.20 μg g ^?1respectively. The bio- concentration factor (BCF) showed its maximum value (15.5) in Excoecaria agallocha for Cd, suggesting that it can be considered as a high-efficient plant for heavy metal bioaccumulation. Among all metals, Cd and Zn were highly bioaccumulated in E. agallocha (2.97 and 52.2 μg g ^?1 respectively. Our findings suggest that the species may be classified as efficient metal trap for Cd in aerial parts, as indicated by higher metal accumulation in the leaves combined with BCF and translocation factor (TF) values.     

Hemostasis During Urologic Surgery: Fibrin Sealant Compared With Absorbable Hemostat

In the United States, fibrin sealants have been used to achieve hemostasis for nearly two decades. Although their clinical utility was first demonstrated in cardiac surgery, their effectiveness and safety have since been demonstrated to extend to a wide array of procedures. Fibrin sealants typically contain two components—fibrinogen and thrombin—that are combined and delivered simultaneously to a target bleeding site in order to achieve hemostasis. However, many commercial formulations contain other additional components, such as antifibrinolytic agents, that have been associated with adverse outcomes. This subanalysis compares the safety and effectiveness of a fibrin sealant versus an absorbable hemostat for achieving hemostasis during urologic procedures with mild to moderate bleeding.Key words: Hemostasis, Hemostatics, Fibrin tissue adhesive, Urologic surgical procedures, Surgical techniqueIn the United States, fibrin sealants have been used to achieve hemostasis for nearly two decades. Although their clinical utility was first demonstrated in cardiac surgery,¹ their effectiveness and safety have since been demonstrated to extend to a wide array of procedures, including cardiovascular, gastrointestinal, pneumothoracic, neurologic, urologic, otolaryngologic, dental, and reconstructive surgeries.^2,3 Within the field of urology, fibrin sealants have been used to manage bleeding from renal trauma,⁴ as well as to facilitate hemostasis during renal surgeries, including partial nephrectomies.^5–7Fibrin sealants typically contain two components—fibrinogen and thrombin—that are combined and delivered simultaneously to a target bleeding site (TBS) in order to achieve hemostasis.³ Many commercial formulations contain other additional components, such as antifibrinolytic agents, that have been associated with adverse outcomes. For example, in an observational study (N = 4374), the antifibrinolytic aprotinin was associated with an increased risk of long-term mortality within 5 years following coronary artery bypass graft surgery.⁸ Furthermore, repeated exposure to aprotinin may lead to allergic or potentially fatal anaphylactic reactions.^9–11 For this reason, the US Food and Drug Administration (FDA) issued an alert in 2006 indicating that caution should be used when using aprotinin in patients with a history of previous exposure to the product.¹² Tranexamic acid, another antifibrinolytic present in some commercial fibrin sealants, has been associated with alterations in neural tissue growth and adherence.¹³ Because of the risk of cerebral neurologic toxicity, fibrin sealants containing tranexamic acid are contraindicated for use in neurosurgery or in surgical procedures during which contact with cerebrospinal fluid or dura mater may occur.¹⁴In a phase III, randomized, single-blind, parallel-group, multicenter study,¹⁵ the fibrin sealant CROSSEAL™ (Ethicon, Inc., Somerville, NJ) significantly reduced the time to hemostasis during liver resection surgery compared with conventional hemostatic techniques. EVICEL® Fibrin Sealant (Human) (Ethicon, Inc.), the successor of CROSSEAL, requires no antifibrinolytic additive and is therefore both aprotinin and tranexamic acid free, and achieves hemostasis using exclusively human components.¹⁶ The effectiveness and safety of this fibrin sealant for hemostasis in soft tissue during elective retroperitoneal or intra-abdominal surgery were compared with an absorbable hemostat (SURGICEL® Absorbable Hemostat; Ethicon, Inc.) in a randomized, active-controlled, multicenter study.¹⁷ This article describes a subanalysis of data from the largest patient subgroup from that study, and evaluates the effectiveness and safety of a fibrin sealant versus an absorbable hemostat for patients who underwent urologic surgical procedures.     

CRISPR/Cas9‐mediated genome modification in the mollusc,Crepidula fornicata

The discovery and application of the CRISPR/Cas9 genome editing method has greatly enhanced the ease with which transgenic manipulation can occur. We applied this technology to the mollusc, Crepidula fornicata, and have successfully created transgenic embryos expressing mCherry fused to endogenous β‐catenin. Specific integration of the fluorescent reporter was achieved by homologous recombination with a β‐catenin‐specific donor DNA containing the mCherry coding sequence. This fluorescent gene knock‐in strategy permits in vivo observations of β‐catenin expression during embryonic development and represents the first demonstration of CRISPR/Cas9‐mediated transgenesis in the Lophotrochozoa superphylum. The CRISPR/Cas9 method is a powerful and economical tool for genome modification and presents an option for analysis of gene expression in not only major model systems, but also in those more diverse species that may not have been amenable to the classic methods of transgenesis. This approach will allow one to generate transgenic lines of snails for future studies. genesis 53:237–244, 2015. © 2014 Wiley Periodicals, Inc.     

Inferring the Forces Controlling Metaphase Kinetochore Oscillations by Reverse Engineering System Dynamics

Kinetochores are multi-protein complexes that mediate the physical coupling of sister chromatids to spindle microtubule bundles (called kinetochore (K)-fibres) from respective poles. These kinetochore-attached K-fibres generate pushing and pulling forces, which combine with polar ejection forces (PEF) and elastic inter-sister chromatin to govern chromosome movements. Classic experiments in meiotic cells using calibrated micro-needles measured an approximate stall force for a chromosome, but methods that allow the systematic determination of forces acting on a kinetochore in living cells are lacking. Here we report the development of mathematical models that can be fitted (reverse engineered) to high-resolution kinetochore tracking data, thereby estimating the model parameters and allowing us to indirectly compute the (relative) force components (K-fibre, spring force and PEF) acting on individual sister kinetochores in vivo. We applied our methodology to thousands of human kinetochore pair trajectories and report distinct signatures in temporal force profiles during directional switches. We found the K-fibre force to be the dominant force throughout oscillations, and the centromeric spring the smallest although it has the strongest directional switching signature. There is also structure throughout the metaphase plate, with a steeper PEF potential well towards the periphery and a concomitant reduction in plate thickness and oscillation amplitude. This data driven reverse engineering approach is sufficiently flexible to allow fitting of more complex mechanistic models; mathematical models of kinetochore dynamics can therefore be thoroughly tested on experimental data for the first time. Future work will now be able to map out how individual proteins contribute to kinetochore-based force generation and sensing.