Tunable Nanoporous Network Polymer Nanocomposites having Size‐Selective Ion Transfer for Dye‐Sensitized Solar Cells

Nanoporous network polymer nanocomposites with tunable pore size for size‐dependent selective ion transport are successfully prepared via the surface‐induced cross‐linking polymerization of methyl methacrylate (MMA) and 1,6‐hexanediol diacrylate (HDDA) on the surfaces of nanocrystalline TiO₂ particles. The morphologies of the porous network polymer layer and nanopores were investigated by transmission electron microscopy (TEM), field emission scanning electron microscopy (FE‐SEM), and Brunauer–Emmett–Teller (BET) experiments. The porous layer size‐selectively screened the ions that contacted the nanocrystalline TiO₂ particles, as demonstrated by ion conductivity measurements, electrochemical impedance spectroscopy (EIS), and transient absorption spectroscopy (TAS).     

Efficient,Cyanine Dye Based Bilayer Solar Cells

Simple bilayer solar cells, using commercially available cationic cyanine dyes as donors and evaporated C₆₀ layer as an acceptor are prepared. Cyanine dyes with absorption maxima of 578, 615 and 697 nm having either perchlorate or hexafluorophosphate counter‐ions are evaluated. The perchlorate dye leads to cells with S‐shape current‐voltage curves; only the dyes with the hexafluorophosphate counter‐ions lead to efficient solar cells. When the wide bandgap dyes are employed, S‐shape current‐voltage curves are obtained when the conductive polymer PEDOT:PSS is used as hole transport layer. Substitution of PEDOT:PSS with MoO₃ leads to cells with more rectangular current–voltage curves and high fill factors. Additionally, the cells using the MoO₃ layer for hole extraction lead to high open circuit voltages of 0.9 V. In the case that a low bandgap hexafluorophosphate dye is used with the HOMO above that of the PEDOT:PSS the cell performance is independent on the type of hole transport layer employed. Using this approach, bilayer solar cells are obtained with power efficiencies ranging from 1.8 to 2.9% depending on the particular dye employed. These are impressive numbers for bilayer solar cell that are partially solution processed in ambient conditions.     

The Effects of Catalyst Layer Deposition Methodology on Electrode Performance

The catalyst layer of the cathode is arguably the most critical component of low‐temperature fuel cells and carbon dioxide (CO₂) electrolysis cells because their performance is typically limited by slow oxygen (O₂) and CO₂ reduction kinetics. While significant efforts have focused on developing cathode catalysts with improved activity and stability, fewer efforts have focused on engineering the catalyst layer structure to maximize catalyst utilization and overall electrode and system performance. Here, we study the performance of cathodes for O₂ reduction and CO₂ reduction as a function of three common catalyst layer preparation methods: hand‐painting, air‐brushing, and screen‐printing. We employed ex‐situ X‐ray micro‐computed tomography (MicroCT) to visualize the catalyst layer structure and established data processing procedures to quantify catalyst uniformity. By coupling structural analysis with in‐situ electrochemical characterization, we directly correlate variation in catalyst layer morphology to electrode performance. MicroCT and SEM analyses indicate that, as expected, more uniform catalyst distribution and less particle agglomeration, lead to better performance. Most importantly, the analyses reported here allow for the observed differences over a large geometric volume as a function of preparation methods to be quantified and explained for the first time. Depositing catalyst layers via a fully‐automated air‐brushing method led to a 56% improvement in fuel cell performance and a significant reduction in electrode‐to‐electrode variability. Furthermore, air‐brushing catalyst layers for CO₂ reduction led to a 3‐fold increase in partial CO current density and enhanced product selectivity (94% CO) at similar cathode potential but a 10‐fold decrease in catalyst loading as compared to previous reports.     

Si‐Encapsulating Hollow Carbon Electrodes via Electroless Etching for Lithium‐Ion Batteries

Remarkable improvements in the electrochemical performance of Si materials for Li‐ion batteries have been recently achieved, but the inherent volume change of Si still induces electrode expansion and external cell deformation. Here, the void structure in Si‐encapsulating hollow carbons is optimized in order to minimize the volume expansion of Si‐based anodes and improve electrochemical performance. When compared to chemical etching, the hollow structure is achieved via electroless etching is more advanced due to the improved electrical contact between carbon and Si. Despite the very thick electrodes (30 ～ 40 μm), this results in better cycle and rate performances including little capacity fading over 50 cycles and 1100 mA h g^?1 at 2C rate. Also, an in situ dilatometer technique is used to perform a comprehensive study of electrode thickness change, and Si‐encapsulating hollow carbon mitigates the volume change of electrodes by adoption of void space, resulting in a small volume increase of 18% after full lithiation corresponding with a reversible capacity of about 2000 mA h g^?1.     

Treadmill desks: A 1‐year prospective trial

Objective: Sedentariness is associated with weight gain and obesity. A treadmill desk is the combination of a standing desk and a treadmill that allow employees to work while walking at low speed. Design and Methods: The hypothesis was that a 1‐year intervention with treadmill desks is associated with an increase in employee daily physical activity (summation of all activity per minute) and a decrease in daily sedentary time (zero activity). Employees (n = 36; 25 women, 11 men) with sedentary jobs (87 ± 27 kg, BMI 29 ± 7 kg/m², n = 10 Lean BMI < 25 kg/m², n = 15 Overweight 25 < BMI < 30 kg/m², n = 11 Obese BMI > 30 kg/m²) volunteered to have their traditional desk replaced with a treadmill desk to promote physical activity for 1 year. Results: Daily physical activity (using accelerometers), work performance, body composition, and blood variables were measured at Baseline and 6 and 12 months after the treadmill desk intervention. Subjects who used the treadmill desk increased daily physical activity from baseline 3,353 ± 1,802 activity units (AU)/day to, at 6 months, 4,460 ± 2,376 AU/day (P < 0.001), and at 12 months, 4,205 ± 2,238 AU/day (P < 0.001). Access to the treadmill desks was associated with significant decreases in daily sedentary time (zero activity) from at baseline 1,020 ± 75 min/day to, at 6 months, 929 ± 84 min/day (P < 0.001), and at 12 months, 978 ± 95 min/day (P < 0.001). For the whole group, weight loss averaged 1.4 ± 3.3 kg (P < 0.05). Weight loss for obese subjects was 2.3 ± 3.5 kg (P < 0.03). Access to the treadmill desks was associated with increased daily physical activity compared to traditional chair‐based desks; their deployment was not associated with altered performance. For the 36 participants, fat mass did not change significantly, however, those who lost weight (n = 22) lost 3.4 ± 5.4 kg (P < 0.001) of fat mass. Weight loss was greatest in people with obesity. Conclusions: Access to treadmill desks may improve the health of office workers without affecting work performance.     

Serum hemorphin‐7 levels are decreased in obesity

Objective:

Hemorphin peptides exhibit biological activities that interfere with the endorphin system, the inflammatory response, and blood‐pressure control. VV‐hemorphin‐7 and LVV‐hemorphin‐7 peptides exert a hypotensive effect, in particular, by inhibiting the renin–angiotensin system. Furthermore, levels of circulating hemorphin‐7 peptides have been found to be decreased in diseases such as type 1 and type 2 diabetes.

Design and Methods:

Because type 2 diabetes and obesity share common features, such as insulin resistance, microinflammation, high glomerular‐filtration rate (GFR), and cardiovascular risk, we evaluated serum VV‐hemorphin‐7 like immunoreactivity (VVH7‐i.r.) levels, using an enzyme‐linked immunosorbent assay method, on a group of 54 obese subjects without diabetes or hypertension, compared with a group of 33 healthy normal‐weight subjects.

Results:

Circulating VVH7‐i.r. levels were significantly decreased in the obese group compared with the control group (1.98 ± 0.19 vs. 4.86 ± 0.54 µmol/l, respectively, P < 0.01), and a significant negative correlation between VVH7‐i.r. and diastolic blood pressure (DBP) was found in obese patients (r = ?0.35, P = 0.011). There was no significant correlation between VVH7‐i.r. level and insulin resistance, metabolic syndrome, or GFR.

Conclusions:

The decreased serum hemorphin‐7 found in obese subjects, as in diabetes, may contribute to the development of hypertension and to the cardiovascular risk associated with these metabolic diseases.

     

Acquired liver fat is a key determinant of serum lipid alterations in healthy monozygotic twins

Objective: The effects of acquired obesity on lipid profile and lipoprotein composition in rare BMI‐discordant monozygotic (MZ) twin pairs were studied. Design and Methods: Abdominal fat distribution, liver fat (magnetic resonance imaging and spectroscopy), fasting serum lipid profile (ultracentrifugation, gradient gel‐electrophoresis, and colorimetric enzymatic methods), and lifestyle factors (questionnaires and diaries) were assessed in 15 BMI‐discordant (within‐pair difference [Δ] in BMI >3 kg/m²) and nin concordant (ΔBMI <3 kg/m²) MZ twin pairs, identified from two nationwide cohorts of Finnish twins. Results: Despite a strong similarity of MZ twins in lipid parameters (intra‐class correlations 0.42‐0.90, P < 0.05), concentrations of apolipoprotein B (ApoB), intermediate‐density lipoprotein cholesterol, low‐density lipoprotein cholesterol (LDL‐C), high‐density lipoprotein 3a% (HDL3a%), and HDL3c% were higher (P < 0.05) and those of HDL cholesterol, HDL2‐C, and HDL2b% were lower (P < 0.01) in the heavier co‐twins of BMI‐discordant pairs. The composition of lipoprotein particles was similar in the co‐twins. When BMI‐discordant pairs were further divided into liver fat‐discordant and concordant (based on median for Δliver fat, 2.6%), the adverse lipid profile was only seen in those heavy co‐twins who also had high liver fat. Conversely, BMI‐discordant pairs concordant for liver fat did not differ significantly in lipid parameters. In multivariate analyses controlling for Δsubcutaneous, Δintra‐abdominal fat, sex, Δsmoking and Δphysical activity, Δliver fat was the only independent variable explaining the variation in ΔApoB, Δtotal cholesterol, and ΔLDL‐C concentration. Conclusions: Several pro‐atherogenic changes in the amounts of lipids but not in the composition of lipoprotein particles were observed in acquired obesity. In particular, accumulation of liver fat was associated with lipid disturbances, independent of genetic effects.