Development of a bio-MEMS device for electrical and mechanical conditioning and characterization of cell sheets for myocardial repair

Here we propose a bio-MEMS device designed to evaluate contractile force and conduction velocity of cell sheets in response to mechanical and electrical stimulation of the cell source as it grows to form a cellular sheet. Moreover, the design allows for the incorporation of patient-specific data and cell sources. An optimized device would allow cell sheets to be cultured, characterized, and conditioned to be compatible with a specific patient's cardiac environment in vitro, before implantation. This design draws upon existing methods in the literature but makes an important advance by combining the mechanical and electrical stimulation into a single system for optimized cell sheet growth. The device has been designed to achieve cellular alignment, electrical stimulation, mechanical stimulation, conduction velocity readout, contraction force readout, and eventually cell sheet release. The platform is a set of comb electrical contacts consisting of three-dimensional walls made of polydimethylsiloxane and coated with electrically conductive metals on the tops of the walls. Not only do the walls serve as a method for stimulating cells that are attached to the top, but their geometry is tailored such that they are flexible enough to be bent by the cells and used to measure force. The platform can be stretched via a linear actuator setup, allowing for simultaneous electrical and mechanical stimulation that can be derived from patient-specific clinical data.     

Impact of phosphorus application on drought resistant responses of Eucalyptus grandis seedlings

Eucalyptus grandis is the most widely planted tree species worldwide and can face severe drought during the initial months after planting because the root system is developing. A complete randomized design was used to study the effects of two water regimes (well‐watered and water‐stressed) and phosphorus (P) applications (with and without P) on the morphological and physio‐biochemical responses of E. grandis. Drought had negative effects on the growth and metabolism of E. grandis, as indicated by changes in morphological traits, decreased net photosynthetic rates (P_n), pigment concentrations, leaf relative water contents (LRWCs), nitrogenous compounds, over‐production of reactive oxygen species (ROS) and higher lipid peroxidation. However, E. grandis showed effective drought tolerance strategies, such as reduced leaf area and transpiration rate (E), higher accumulation of soluble sugars and proline and a strong antioxidative enzyme system. P fertilization had positive effects on well‐watered seedlings due to improved growth and photosynthesis, which indicated the high P requirements during the initial E. grandis growth stage. In drought‐stressed seedlings, P application had no effects on the morphological traits, but it significantly improved the LRWC, P_n, quantum efficiency of photosystem II (F_v/F_m), chlorophyll pigments, nitrogenous compounds and reduced lipid peroxidation. P fertilization improved E. grandis seedling growth under well‐watered conditions but also ameliorated some leaf physiological traits under drought conditions. The effects of P fertilization are mainly due to the enhancement of plant N nutrition. Therefore, P can be used as a fertilizer to improve growth and production in the face of future climate change.     

Mutation in EMB1923 gene promoter is associated with chlorophyll deficiency in Chinese cabbage (Brassica campestris ssp. pekinensis)

Leaf color mutants are widespread in higher plants and can be used as markers in crop breeding or as important material in understanding the regulatory mechanisms of chlorophyll biosynthesis and chloroplast development. A stably inherited plant etiolated mutation (pem) was obtained from its wild‐type ‘FT’ (a doubled haploid line of the Chinese cabbage variety ‘Fukuda 50’) by combining ⁶⁰Co‐γ radiation and isolated microspore culture in Chinese cabbage. Compared to the wild‐type ‘FT’, the chlorophyll content in the pem mutant was decreased, the photosynthetic capacity was reduced and the chloroplast development was retarded. These physiological changes may lead to a reduction in growth and yield in the pem mutant line. Genetic analysis showed that the mutant phenotype was controlled by the single recessive nuclear pem gene. The pem gene was mapped to a 25.88 kb region on the A03 chromosome. Cloning and sequencing results showed that there was only one DNA sequence variation in this region, which was a 30 bp deletion on the promoter of Bra024218. Its homologous gene encodes EMBRYO DEFECTIVE 1923 (EMB1923) in Arabidopsis thaliana. We therefore predicted that Bra024218 was the mutated gene associated with etiolated leaves in Chinese cabbage. The pem mutant is a useful line for researching chloroplast development and the mechanism of leaf color mutation in Chinese cabbage.     

Isoprene is more affected by climate drivers than monoterpenes: A meta‐analytic review on plant isoprenoid emissions

Isoprene and monoterpenes (MTs) are among the most abundant and reactive volatile organic compounds produced by plants (biogenic volatile organic compounds). We conducted a meta‐analysis to quantify the mean effect of environmental factors associated to climate change (warming, drought, elevated CO₂, and O₃) on the emission of isoprene and MTs. Results indicated that all single factors except warming inhibited isoprene emission. When subsets of data collected in experiments run under similar change of a given environmental factor were compared, isoprene and photosynthesis responded negatively to elevated O₃ (?8% and ?10%, respectively) and drought (?15% and ?42%), and in opposite ways to elevated CO₂ (?23% and +55%) and warming (+53% and ?23%, respectively). Effects on MTs emission were usually not significant, with the exceptions of a significant stimulation caused by warming (+39%) and by elevated O₃ (limited to O₃‐insensitive plants, and evergreen species with storage organs). Our results clearly highlight individual effects of environmental factors on isoprene and MT emissions, and an overall uncoupling between these secondary metabolites produced by the same methylerythritol 4‐phosphate pathway. Future results from manipulative experiments and long‐term observations may help untangling the interactive effects of these factors and filling gaps featured in the current meta‐analysis.     

Natural variation in cytokinin maintenance improves salt tolerance in apple rootstocks

Plants experiencing salt‐induced stress often reduce cytokinin levels during the early phases of stress‐response. Interestingly, we found that the cytokinin content in the apple rootstock “robusta” was maintained at a high level under salt stress. Through screening genes involved in cytokinin biosynthesis and catabolism, we found that the high expression levels of IPT5b in robusta roots were involved in maintaining the high cytokinin content. We identified a 42 bp deletion in the promoter region of IPT5b, which elevated IPT5b expression levels, and this deletion was linked to salt tolerance in robusta×M.9 segregating population. The 42 bp deletion resulted in the deletion of a Proline Response Element (ProRE), and our results suggest that ProRE negatively regulates IPT5b expression in response to proline. Under salt stress, the robusta cultivar maintains high cytokinin levels as IPT5b expression cannot be inhibited by proline due to the deletion of ProRE, leading to improve salt tolerance.     

Microbial Community Analysis and Effects of Fe(II)/Mn(II) Ratio on Denitrification in the Mixotrophic Biological Reactor

In this study, the denitrification performance of the mixotrophic biological reactor was investigated under varying Fe(II)/Mn(II) molar ratio conditions. Results indicate that the optimal nitrate removal ratio occurred at an Fe(II)/Mn(II) molar ratio of 9:1, pH of 7, with an HRT of 10?h. When the reactor was performing under optimal conditions, the nitrate removal reached 100.00% at a rate of 0.116?mmol·L^?1·h^?1. The proportion of oxidized Fe(II) and Mn(II) reached 99.29% and 21.88%, respectively. High-throughput sequencing results show that Pseudomonas was the dominant species in the mixotrophic biological reactor. Furthermore, the relative abundance of Pseudomonas and denitrification performance was significantly influenced by variation in the Fe(II)/Mn(II) molar ratio.     

Calculation of an Adequate Intake (AI) Value and Safe Range of Selenium (Se) for Chinese Infants 0–3 Months Old Based on Se Concentration in the Milk of Lactating Chinese Women with Optimal Se Intake

Biological Trace Element Research - The required selenium intake for optimal health in Chinese residents was published in 2014. However, the adequate intake (AI) value for Chinese infants...     

Cotton CSLD3 restores cell elongation and cell wall integrity mainly by enhancing primary cellulose production in the Arabidopsis cesa6 mutant

Key message

Overexpression of cotton cellulose synthase like D3 (GhCSLD3) gene partially rescued growth defect of atcesa6 mutant with restored cell elongation and cell wall integrity mainly by enhancing primary cellulose production.

Abstract

Among cellulose synthase like (CSL) family proteins, CSLDs share the highest sequence similarity to cellulose synthase (CESA) proteins. Although CSLD proteins have been implicated to participate in the synthesis of carbohydrate-based polymers (cellulose, pectins and hemicelluloses), and therefore plant cell wall formation, the exact biochemical function of CSLD proteins remains controversial and the function of the remaining CSLD genes in other species have not been determined. In this study, we attempted to illustrate the function of CSLD proteins by overexpressing Arabidopsis AtCSLD2, -3, -5 and cotton GhCSLD3 genes in the atcesa6 mutant, which has a background that is defective for primary cell wall cellulose synthesis in Arabidopsis. We found that GhCSLD3 overexpression partially rescued the growth defect of the atcesa6 mutant during early vegetative growth. Despite the atceas6 mutant having significantly reduced cellulose contents, the defected cell walls and lower dry mass, GhCSLD3 overexpression largely restored cell wall integrity (CWI) and improved the biomass yield. Our result suggests that overexpression of the GhCSLD protein enhances primary cell wall synthesis and compensates for the loss of CESAs, which is required for cellulose production, therefore rescuing defects in cell elongation and CWI.

     

A photosynthesis-inspired supramolecular system: caging photosensitizer and photocatalyst in apoferritin

Photosynthesis Research - Inspired by the bioinorganic structure of natural [FeFe]-hydrogenase ([FeFe]-H2ase) that possesses iron sulfur clusters to catalyze proton reduction to hydrogen (H2), we...     

碳代谢基因gabT调控生防菌Snea253的γ-氨基丁酸代谢途径影响杀线虫活性

【背景】委内瑞拉链霉菌Snea253是本实验室前期获得的具有杀植物线虫活性的生防放线菌,通过生物信息学分析,γ-氨基丁酸转氨酶基因(gabT)是参与Snea253碳代谢的重要基因之一。【目的】明确gabT基因通过调控Snea253的γ-氨基丁酸(γ-Aminobutyric acid,GABA)代谢通路,从而影响菌株的活性。【方法】以紫外诱变所得弱毒株(Snea253-R)为材料,以南方根结线虫为靶标,在弱毒株中过表达gabT基因,通过酶联免疫法(ELISA)和高效液相色谱法(HPLC)分别检测菌株中GABA和下游代谢产物琥珀酸的含量及杀线虫活性,同时检测在不同碳源培养条件下野生型菌株gabT基因表达水平、产物含量和杀线虫活性。【结果】过表达菌株R-p IB139的gabT基因上调表达,GABA含量降低,琥珀酸含量升高,杀线虫活性提高了39%;在8种不同碳源培养条件下,gabT基因在野生株中相对表达量较高的培养基碳源是可溶性淀粉和玉米淀粉,其发酵液中GABA含量较低,发酵液中下游代谢产物增多,杀线虫活性较高。【结论】通过改变gabT基因的表达,明确GABA支路在调控Snea253代谢以提高杀线虫的过程中发挥重要作用。