Bat rabies surveillance in France: first report of unusual mortality among serotine bats

Background

Rabies is a fatal viral encephalitic disease that is caused by lyssaviruses which can affect all mammals, including human and bats. In Europe, bat rabies cases are attributed to five different lyssavirus species, the majority of rabid bats being attributed to European bat 1 lyssavirus (EBLV-1), circulating mainly in serotine bats (Eptesicus serotinus). In France, rabies in bats is under surveillance since 1989, with 77 positive cases reported between 1989 and 2016.

Case presentation

In the frame of the bat rabies surveillance, an unusual mortality of serotine bats was reported in 2009 in a village in North-East France. Six juvenile bats from an E. serotinus maternity colony counting ~200 individuals were found to be infected with EBLV-1. The active surveillance of the colony by capture sessions of bats from July to September 2009 showed a high detection rate of neutralising EBLV-1 antibodies (≈ 50%) in the colony. Moreover, one out of 111 animals tested was found to shed viable virus in saliva, while lyssavirus RNA was detected by RT-PCR for five individuals.

Conclusion

This study demonstrated that the lyssavirus infection in the serotine maternity colony was followed by a high rate of bat rabies immunity after circulation of the virus in the colony. The ratio of seropositive bats is probably indicative of an efficient virus transmission coupled to a rapid circulation of EBLV-1 in the colony.

     

Atomic Layer Deposition of Functional Layers for on Chip 3D Li‐Ion All Solid State Microbattery

Nowadays, millimeter scale power sources are key devices for providing autonomy to smart, connected, and miniaturized sensors. However, until now, planar solid state microbatteries do not yet exhibit a sufficient surface energy density. In that context, architectured 3D microbatteries appear therefore to be a good solution to improve the material mass loading while keeping small the footprint area. Beside the design itself of the 3D microbaterry, one important technological barrier to address is the conformal deposition of thin films (lithiated or not) on 3D structures. For that purpose, atomic layer deposition (ALD) technology is a powerful technique that enables conformal coatings of thin film on complex substrate. An original, robust, and highly efficient 3D scaffold is proposed to significantly improve the geometrical surface of miniaturized 3D microbattery. Four functional layers composing the 3D lithium ion microbattery stacking has been successfully deposited on simple and double microtubes 3D templates. In depth synchrotron X‐ray nanotomography and high angle annular dark field transmission electron microscope analyses are used to study the interface between each layer. For the first time, using ALD, anatase TiO₂ negative electrode is coated on 3D tubes with Li₃PO₄ lithium phosphate as electrolyte, opening the way to all solid‐state 3D microbatteries. The surface capacity is significantly increased by the proposed topology (high area enlargement factor – “thick” 3D layer), from 3.5 μA h cm^?2 for a planar layer up to 0.37 mA h cm^?2 for a 3D thin film (105 times higher).     

Bacteria may contribute to distant species recognition in ant–aphid mutualistic relationships

Mutualistic interactions between ant and aphid species have been the subject of considerable historical and contemporary investigations, the primary benefits being cleaning and protection for the aphids and carbohydrate‐rich honeydew for the ants. Questions remained, however, as to the volatile semiochemical factor influencing this relationship. A recent study highlighted the role of bacterial honeydew volatile compounds in ant attraction. Here, ant's ability to distantly discriminate 2 aphid species was investigated based on bacterial honeydew semiochemicals emissions using a two‐way olfactometer. Both the mutualistic aphid Aphis fabae L. and the nonmyrmecophilous aphid Acyrthosiphon pisum Harris were found to be attractive for the ant Lasius niger L. The level of attraction was similar in both assays (control vs. one of the aphid species). However, when given a choice between these 2 aphid species, ants showed a significant preference for Aphis fabae. Honeydew volatiles, mostly from bacterial origins, are known to be a key element in ant attraction. Using the same olfactometry protocol, the relative attractiveness of volatiles emitted by honeydews collected from each aphid species and by bacteria isolated from each honeydew was investigated. Again, ants significantly preferred volatiles released by Aphis fabae honeydew and bacteria. This information suggests that microbial honeydew volatiles enable ants to distantly discriminate aphid species. These results strengthen the interest of studying the occurrence and potential impact of microorganisms in insect symbioses.     

Inspiratory flow in the nose: a model coupling flow and vasoerectile tissue distensibility.

We have developed a discrete multisegmental model describing the coupling between inspiratory flow and nasal wall distensibility. This model is composed of 14 individualized compliant elements, each with its own relationship between cross-sectional area and transmural pressure. Conceptually, this model is based on flow limitation induced by the narrowing of duct due to collapsing pressure. For a given inspiratory pressure and for a given compliance distribution, this model predicts the area profile and inspiratory flow. Acoustic rhinometry and posterior rhinomanometry were used to determine the initial geometric area and mechanical characteristics of each element. The proposed model, used under steady-state conditions, is able to simulate the pressure-flow relationship observed in vivo under normal conditions (4 subjects) and under pathological conditions (4 vasomotor rhinitis and 3 valve syndrome subjects). Our results suggest that nasal wall compliance is an essential parameter to understand the nasal inspiratory flow limitation phenomenon and the associated increase of resistance that is well known to physiologists. By predicting the functional pressure-flow relationship, this model could be a useful tool for the clinician to evaluate the potential effects of treatments.     

Unusual feather structure allows partial plumage wettability in diving great cormorants Phalacrocorax carbo

The great cormorant Phalacrocorax carbo is thought to have a wettable plumage, providing low body insulation during foraging. Great cormorants should thus be constrained by water temperatures, and show high energy requirements. Surprisingly, this species has one of the widest breeding distributions of all diving birds, and does not require more food than these other species. We explored this apparent paradox by comparing the insulative properties of body plumage in four subspecies of great cormorants ranging from tropical to polar regions. We found that all subspecies retained an insulating air layer in their plumage, which was, however, much thinner than for other species of diving birds. Detailed examination of the plumage showed that each cormorant body feather has a loose, instantaneously wet, outer section and a highly waterproof central portion. This indicates that the plumage of great cormorants is only partly wettable, and that birds maintain a thin layer of air in their plumage. Our findings suggest an unusual morphological-functional adaptation to diving which balances the antagonist constraints of thermoregulation and buoyancy.     

Method for Isolation of Bacteroides Bacteriophage Host Strains Suitable for Tracking Sources of Fecal Pollution in Water

Bacteriophages infecting Bacteroides are potentially a good tool for fecal source tracking, but different Bacteroides host strains are needed for different geographic areas. A feasible method for isolating Bacteroides host strains for phages present in human fecal material is described. Useful strains were identified for application in Spain and the United Kingdom. One strain, GA-17, identified as Bacteroides thetaiotaomicron, was tested in several locations in Europe with excellent performance in Southern Europe.     

Glutamine Synthesis Is Essential for Growth of Streptococcus thermophilus in Milk and Is Linked to Urea Catabolism

Growth of a glutamine synthetase-deficient mutant of Streptococcus thermophilus was compared to that of the parent strain in milk that was not supplemented or was supplemented with ammonium chloride, glutamine, or the urease inhibitor flurofamide. It was concluded that one of the functions of urease is to supply ammonia for the synthesis of glutamine.     

Adhesion-Aggregation and Inactivation of Poliovirus 1 in Groundwater Stored in a Hydrophobic Container

Viral inactivation and adhesion-aggregation in water are often studied as separate phenomena. When the focus is placed on viral adhesion-aggregation, inactivation is neglected because the phenomena under investigation occur over a short period measured in days. When viral inactivation is studied, adhesion-aggregation phenomena are considered to be negligible because viral survival is traced over several days or months. In the present work, we took a global approach, examining the relative contributions of each of these processes in a complex system composed of groundwater, Poliovirus 1, and a hydrophobic container (polypropylene) maintained in a dark environment at 20°C. We demonstrated that infectious viral load fell off 2.8 log₁₀ during the first 20 days. During this time, adhesion was far from negligible because it accounted for most of the decline, 1.5 log₁₀. Adhesion was undoubtedly favored by the presence of divalent ions in the groundwater. After 20 days, aggregation may also have been the cause of 0.66 to 0.92 log₁₀ of viral loss. Finally, viral inactivation was quantitatively the lowest phenomena because it only explained 0.38 to 0.64 log₁₀ of the viral loss. This study thus clearly demonstrated that estimates of viral survival in a given system must always take into account adhesion-aggregation phenomena which may be responsible for the majority of viral loss in the aqueous phase. Adhesion and aggregation are reversible processes which may lead to an underestimation of viral load in certain studies.