Acetic acid-catalyzed hydrothermal pretreatment of corn stover for the production of bioethanol at high-solids content

Corn stover (CS) was hydrothermally pretreated using CH₃COOH (0.3 %, v/v), and subsequently its ability to be utilized for conversion to ethanol at high-solids content was investigated. Pretreatment conditions were optimized employing a response surface methodology (RSM) with temperature and duration as independent variables. Pretreated CS underwent a liquefaction/saccharification step at a custom designed free-fall mixer at 50 °C for either 12 or 24 h using an enzyme loading of 9 mg/g dry matter (DM) at 24 % (w/w) DM. Simultaneous enzymatic saccharification and fermentation (SSF) of liquefacted corn stover resulted in high ethanol concentration (up to 36.8 g/L), with liquefaction duration having a negligible effect. The threshold of ethanol concentration of 4 % (w/w), which is required to reduce the cost of ethanol distillation, was surpassed by the addition of extra enzymes at the start up of SSF achieving this way ethanol titer of 41.5 g/L.     

Nitric oxide: a novel inducer for enhancement of microbial lipase production

The purpose of this study was to elucidate whether exogenous nitric oxide (NO) has a potential beneficial effect on lipase production capacity of some microorganisms. Sodium nitroprusside (SNP) was used as an exogenous NO donor in production medium. In comparison with the control (0 nM SNP), SNP concentrations from 10 to 100 nM induced lipase production in mesophilic bacterium Bacillus subtilis and cold-adapted yeast Yarrowia lipolytica. Especially, the maximum lipase activities for Y. lipolytica (81.2 U/L) and B. subtilis (74.5 U/L) were attained at 30 and 50 nM SNP concentrations, respectively. When compared to the control, the optimal SNP concentrations resulted in about 5.14 and 2.27-fold increases in lipase activities of B. subtilis and Y. lipolytica, respectively. Besides, it was found that the optimal SNP concentrations provided shorter incubation periods for lipase production. Conversely, no significant positive effect of exogenous NO on lipase production was determined for thermophilic bacterium Geobacillus stearothermophilus. This study showed for the first time that exogenous NO could be used as an inducer in the production of microbial lipases.     

Improved extracellular expression and high-cell-density fed-batch fermentation of chitosanase from <Emphasis Type="Italic">Aspergillus Fumigatus</Emphasis> in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Chitosanase (CSN) from Aspergillus fumigatus has good thermal stability, wide pH range duration, and effective hydrolysis for chitosan. Inhere, CSN was successfully expressed in Escherichia coli followed by extracellular secretion under the guidance of an N-terminal signal peptide PelB, which effectively prompted its secretion out of E. coli cells. To facilitate its later purification, N-terminal or C-terminal 6xHis epitope tag was added to the PelB-CSN protein complex. Our results indicated that PelB-CSN without 6xHis-tag (PelB-CSN) or with N-terminal 6xHis-tag (PelB-CSN-N) can both be effectively secreted into the medium, while CSN with 6xHis-tag anchored at C-terminus was expressed as inclusion bodies. Process optimization strategies were further developed to improve the secretion efficiency of recombinant PelB-CSN-N in E. coli. Under the induction of 10 g/L lactose in shake-flask culture, the extracellular activity of CSN reached 6015 U/mL at 25 °C in TB medium containing 1 % glycine. Moreover, a fed-batch fermentation strategy for high-cell-density cultivation was applied in a 5-L fermenter, increasing the extracellular CSN activity to 14,000 U/mL in 2-day fermentation with the optimal addition of lactose and glycine.     

Kinetics of infected insect cell osmolysis and enhanced protein release using a modified disruption method

We have studied and characterized a cell disruption method to produce a protein extract from recombinant Baculovirus infected insect cells based on osmotic lysis. Cell lysis kinetics were measured during a 24-h incubation in lysis buffer and resulting data sets were curve fitted to a hyperbola, visually similar to the Michaelis–Menten curve, to determine the maximum concentration of released protein and the time required to reach equilibrium. Effect of parameters such as pH, ionic strength and infection phase were evaluated, and based on fittings optimal protein release conditions were obtained for total cell protein as well as the recombinant protein, HPV 16 L1. It was demonstrated that pH and the phase of infection can vastly influence the amount of release while ionic strength only effects the time required to achieve equilibrium in protein release. Osmolysis can be a mild, yet effective method to release recombinant protein with high recovery levels and hence can be used in capacities where stringent criteria regarding contamination with surfactant or non-cytoplasmic contents are observed.     

Effect of physicochemical pre-treatment of rice straw on its digestibility by <Emphasis Type="Italic">Clostridium cellulolyticum</Emphasis>

Rice straw (RS) may serve as a low-cost biomass for the production of biofuels and biochemicals, but its native structure is resistant to enzymatic and microbial deconstruction. Therefore, an efficient pre-treatment method is required to modify crystalline cellulose to a more reactive amorphous form. This work investigated pre-treatments of rice straw involving size reduction (S) followed by either sodium hydroxide (NaOH) or diluted sulfuric acid (H₂SO₄) and liquid hot water (LHW). The shrinkage of the vascular bundles in the rice straw structure pre-treated with NaOH–LHW–S was higher than that with LHW–S and H₂SO₄–LHW–S pre-treatments. The highest levels of total fermentative products and residual sugars were obtained at the concentrations of 7.8 ± 0.2 and 2.1 ± 0.3 g/L, respectively, after fermentation by Clostridium cellulolyticum for NaOH–LHW–S pre-treated rice straw at 121 °C for 120 min. Overall, the combined physicochemical pre-treatment of RS led to improved microbial hydrolysis during cellulose degradation at the percentage of 85.5 ± 0.5.     

Difference analysis of the enzymatic hydrolysis performance of acid-catalyzed steam-exploded corn stover before and after washing with water

The difference in the enzymatic hydrolysis yield of acid-catalyzed steam-exploded corn stover (ASC) before and after washing with water reached approximately 15 % under the same conditions. The reasons for the difference in the yield between ASC and washed ASC (wASC) were determined through the analysis of the composition of ASC prehydrolyzate and sugar concentration of enzymatic hydrolyzate. Salts produced by neutralization (CaSO₄, Na₂SO₄, K₂SO₄, and (NH₄)₂SO₄), sugars (polysaccharides, oligosaccharides, and monosaccharides), sugar-degradation products (weak acids and furans), and lignin-degradation products (ethyl acetate extracts and nine main lignin-degradation products) were back-added to wASC. Results showed that these products, except furans, exerted negative effect on enzymatic hydrolysis. According to the characteristics of acid-catalyzed steam explosion pretreatment, the five sugar-degradation products’ mixture and salts [Na₂SO₄, (NH₄)₂SO₄] showed minimal negative inhibition effect on enzymatic hydrolysis. By contrast, furans demonstrated a promotion effect. Moreover, soluble sugars, such as 13 g/L xylose (decreased by 6.38 %), 5 g/L cellobiose (5.36 %), 10 g/L glucose (3.67 %), as well as lignin-degradation products, and ethyl acetate extracts (4.87 %), exhibited evident inhibition effect on enzymatic hydrolysis. Therefore, removal of soluble sugars and lignin-degradation products could effectively promote the enzymatic hydrolysis performance.     

Non-water miscible ionic liquid improves biocatalytic production of geranyl glucoside with <Emphasis Type="Italic">Escherichia coli</Emphasis> overexpressing a glucosyltransferase

Whole cells of Escherichia coli overexpressing a glucosyltransferase from Vitis vinifera were used for the glucosylation of geraniol to geranyl glucoside. A high cell density cultivation process for the production of whole-cell biocatalysts was developed, gaining a dry cell mass concentration of up to 67.6 ± 1.2 g L^?1 and a glucosyltransferase concentration of up to 2.7 ± 0.1 g protein L^?1 within a process time of 48 h. Whole-cell batch biotransformations in milliliter-scale stirred-tank bioreactors showed highest conversion of geraniol at pH 7.0 although the pH optimum of the purified glucosyltransferase was at pH 8.5. The biocatalytic batch process performance was improved significantly by the addition of a water-immiscible ionic liquid (N-hexylpyridinium bis(trifluoromethylsulfonyl)imid) for in situ substrate supply. The so far highest final geranyl glucoside concentration (291 ± 9 mg L^?1) and conversion (71 ± 2 %) reported for whole-cell biotransformations of geraniol were achieved with 5 % (v/v) of the ionic liquid.     

Phylogeny and morphology of the <Emphasis Type="Italic">Peziza ammophila</Emphasis> complex (Pezizales,Ascomycota), with description of two new species and a new form

This study was focused on species of Peziza belonging to the “P. ammophila” complex, using both morphological and molecular approaches. Molecular and morphological analyses showed that several taxa are hidden under the name “ammophila” and, as a consequence, two additional species and one form are established: P. hellenica sp. nov., P. oceanica sp. nov. and P. ammophila f. megaspora f. nov. On the basis of the data that we have, these taxa seem to be related to some geographical areas; P. ammophila appears to be prevalent in northern, central and southern Europe, its f. megaspora is distributed in France and in the Netherlands, P. hellenica comes from Greece and P. oceanica from New Zealand. A cryptic species, not yet circumscribed satisfactorily, is described as P. deceptiva ad int. Moreover, the problem concerning the identification of P. ammophila is raised, the species is epitypified with a sequenced collection from Sicily (Italy) and a key to the species of the complex is provided.     

<Emphasis Type="Italic">Phialemoniopsis endophytica</Emphasis> sp. nov., a new species of endophytic fungi from <Emphasis Type="Italic">Luffa cylindrica</Emphasis> in Henan,China

During a survey of endophytic fungi in the cucurbit plants collected from Henan, China, a new species, Phialemoniopsis endophytica was isolated from the lower stem of Luffa cylindrica. It differs from other Phialemoniopsis species by its cylindrical to flask-shaped phialides, falcate conidia with blunt ends, ostiolate pycnidium-like conidiomata without marginal setae and ellipsoidal chlamydospores. Multi-locus (ITS, LSU, ACT, and TUB) phylogenetic analysis confirmed that P. endophytica is distinct from other species. A synopsis of the morphological characters of the new species is provided.